Customs tariff code 5903.90.99: Other
Reference data as at 1 July 2026
Customs tariff code 5903.90.99 covers Other. The third-country duty rate is 8 %, plus import VAT.
5903.90.99 is CN code in the EU customs tariff, in chapter 59. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 5903.90.99
- Third-country duty
- 8 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 5903.90.99
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 8 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ukraine | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1A002"Composite" structures or laminates, as follows:
- 1A202Composite structures, other than those specified in 1A002, in the form of thin-walled tubes and having all of the following characteristics:
- 1C010"Fibrous or filamentary materials", as follows:
- 1C210'Fibrous or filamentary materials' or prepregs, other than those specified in 1C010.a., .b. or .e., as follows:
- 0007Weapons / munitions / military material (Ausfuhrliste Teil I A)
- 1A004bProtective and detection equipment and components not specially designed for military use, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Tissu à armure sergé, de fibres synthétiques (polyamide aromatique, dit aramide), enduit sur une face d'un film de matière plastique (polydiméthylsiloxane) aluminisé, selon les données de l'opérateur, et perceptible à l’œil nu, abstraction faite du changement de couleur provoqué par cette opération.
Tissu à armure toile, constitué de fils de fibres synthétiques (polyamide), et enduit sur une face de matière plastique de type silicone, non alvéolaire, perceptible à l’œil nu. Le tissu est conditionné par laize de 1,6m. Poids : 230 g/m²
Tissu de fils de fibres synthétiques (fibres mélangées d'aramide et de polyacrylonitrile oxydé), recouvert sur une face d'un film de matières plastiques (mélange PVC/PVAc/PVA) lui-même recouvert d'une fine couche d'aluminium. Le tissu pèse environ 370 g/m² et le produit fini pèse au total 515 g/m². Il est vendu en laize de 150 cm.
Tissu teint, constitué de fibres multi-filaments de polyamide, enduit sur une face de résine de polyamide. L’enduction est perceptible à l’œil nu et non alvéolaire. Masse au m² : 210 g.
Tissu sergé constitué de fibres synthétiques d'aramide et de fibres noires non identifiables, enduit sur une face d'un film de polyester aluminisé. Selon les données client, le tissu est composé de 70% de Preox et 30% d'Aramide.
Tissu sergé constitué de fibres synthétiques d'aramide et de fibres noires (tissu preox-aramide d'après les données de l'opérateur), enduit sur une face d'un film de matière plastique (polyester) aluminisé. Le tissu est composé de 70% de preox et de 30% d'aramide. Le produit est présenté en rouleaux. Poids de 490 g/m².
Article en matière textile de type tissu à armure sergé, confectionné en fibres synthétiques jaunes d'aramide (kevlar). Il est enduit sur une face d'un film de matière plastique (PET), préalablement aluminisé sur sa face intérieure en contact avec le tissu. L'enduction est perceptible à l’œil nu, non alvéolaire et n'est présente que sur une seule face de l'article. L'article est destiné à la confection d'enveloppe de dirigeable. Il sera présenté en rouleau de 100ml, laize 1260mm, sur un support tube carton et emballé en caisse carton sur palette bois.
Mit Kunststoff bestrichenes Gewebe, Foto siehe Anlage, - als Meterware, laut Antrag mit einer Breite von 310 cm und 410 cm, - aus einem Gewebe aus synthetischen Chemiefasern (laut Antrag Polyester); das auf einer Seite mit dem bloßen Auge wahrnehmbar mit Kunststoff (laut Antrag weder Polyvinylchlorid noch Polyurethan; kein Zellkunststoff) bestrichen ist, - von Hand bei einer Temperatur zwischen 15 und 30°C auf einen Dorn von 7 mm Durchmesser aufrollbar, ohne rissig zu werden, - aufgrund der beidseitigen Verwendbarkeit ohne erkennbare Schauseite, - auf der anderen Seite zusätzlich mit einem mehrlagigen Kunststoff (laut Antrag weder Polyvinylchlorid noch Polyurethan; Zellstruktur erkennbar) laminiert, - im Hinblick auf die Verwendung sind die Gewebe und der Kunststoff gleichermaßen von Bedeutung, im Hinblick auf das äußere Erscheinungsbild und den Umfang (Dicke) bestimmt das Gewebe gegenüber dem Kunststoff den Charakter der Ware, somit keine Ware der Position 3921. "Gewebe, mit Kunststoff (weder Polyvinylchlorid noch Polyurethan) bestrichen, anderes als solche der Position 5902, anderes als in der Unterposition (KN) 5903 9091 genannte"
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 471/2002 der Kommission vom 15. März 20021) (RV L 471/02): 3. Rechteckiger ca.4 mm dicker Zellkunststoff (Polyurethan), (Maße ca.20 ×21 cm), einseitig mit ca.0,2 mm dickem, bunt bedrucktem Gewirke überzogen. (Mouse-Pads und ähnliche Waren) (Siehe Fotografie Nr.619)2) Unterposition 5903 2090 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, der Anmerkung 7 a) zu Abschnitt XI, den Anmerkungen 1, 2 a) 5) zu Kapitel 59 sowie nach dem Wortlaut der KN-Codes 5903, 5903 20 und 5903 2090. Die Ware gilt nicht als „konfektioniert“ im Sinne der Anmerkung 7 a) des Abschnitts XI, weil sie in rechteckiger Form zugeschnitten ist. …
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Bundesfinanzhofes 17. Oktober 1989 Az.: VII K 2/89 3. NV: Reversseide, bestehend aus einer Gewebelage (Schauseite) und einer gewichtsmäßig überwiegenden Unterlage aus Gewirke (Polyester-Gewirke mit Polyurethan-Belag) ist der Unterposition 5903 20 90 KN zuzuweisen. Eine Tarifierung unter Position 5407 KN kommt nicht in Betracht Aus den Gründen: ... Tatbestand: Die beklagte Oberfinanzdirektion (OFD) erteilte der Klägerin eine verbindliche ZOLLTARIFAUSKUNFT (vZTA) vom .. Mai 198.. …
Zu Position 5903 gehören: a) Gewebe (Gewirke), mit Kunststoff getränkt, bestrichen oder überzogen oder laminiert, ohne Rücksicht auf das Quadratmetergewicht und die Beschaffenheit des Kunststoffs (fest oder zellförmig), ist auch auf Gewebe anwendbar, die nur mit einer Kunststofflage versehen sind ausgenommen: 1) Gewebe (Gewirke), bei denen das Tränken, Bestreichen oder Überziehen mit bloßem Auge nicht wahrnehmbar ist (im Allgemeinen Kapitel 50 bis 55, 58 oder 60); dabei bleiben Veränderungen der Farbe, die hierdurch hervorgerufen sind, außer Betracht gilt für 2-schichtige Erzeugnisse mit Festkunststoff unabhängig von der Art der Beschichtung (getränkt, bestrichen oder überzogen) für 2-schichtige Erzeugnisse mit Zellkunststoff ist Anm. 2 a) 5) Kap. …
1. Als „Gewebe" im Sinne des Kapitels 59 gelten, wenn nichts anderes bestimmt ist, die Gewebe der Kapitel 50 bis 55 und der Positionen 5803 und 5806, Geflechte, Posamentierwaren und ähnliche Zierwaren, als Meterware, der Position 5808 sowie Gewirke und Gestricke der Position 6002 bis 6006 (RV E5901000). 2. Zu Position 5903 gehören: a) Gewebe, mit Kunststoff getränkt, bestrichen, überzogen oder laminiert, ohne Rücksicht auf das Quadratmetergewicht und die Beschaffenheit des Kunststoffs (fest oder zellförmig), ausgenommen (RV E5902A00): 1) Gewebe, bei denen das Tränken, Bestreichen oder Überziehen mit bloßem Auge nicht wahrnehmbar ist (im Allgemeinen Kapitel 50 bis 55, 58 oder 60); dabei bleiben Veränderungen der Farbe, die hierdurch hervorgerufen sind, außer Betracht (RV E5902A10); 2) Erzeugnisse, die von Hand bei einer Temperatur zwischen 15 und 30°C nicht auf einen Dorn von 7 mm Durchme …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 5903.90.99 cover?
Code 5903.90.99 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 5903.90.99?
The third-country duty rate for 5903.90.99 is 8 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 5903.90.99?
The first six digits form the HS code: 590390. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 5903.90.99 have?
5903.90.99 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 5903.90.99 sit in the tariff?
5903.90.99 sits in this hierarchy: 59 IMPREGNATED, COATED, COVERED OR LAMINATED TEXTILE FABRICS; TEXTILE ARTICLES OF A KIND SUITABLE FOR INDUSTRIAL USE > 5903 Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902 > 590390 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 5903.90.99?
Yes. The EBTI database holds decisions on 5903.90.99, for example FRBTIFR-BTI-2026-01908. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 5903.90.99 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 5903.90.99 to 1A002, 1A202, 1C010, 1C210, 0007, 1A004b. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 5903.90.99 change?
5903.90.99 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.