Customs tariff code 7007.19.80: Other, anderes
Reference data as at 1 July 2026
Customs tariff code 7007.19.80 covers Other, anderes. The third-country duty rate is 3 %, plus import VAT.
7007.19.80 is CN code in the EU customs tariff, in chapter 70. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7007.19.80
- Third-country duty
- 3 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 7007.19.80
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3 % | MFN |
| Algeria | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Vorgespanntes Einschichten-Sicherheitsglas, sog. Einscheibensicherheitsglas, Foto siehe Anlage, ein Warenmuster wurde nicht vorgelegt, die Einreihung erfolgt anhand der Antragsangaben, - Platte aus vorgespanntem Einschichten-Sicherheitsglas, - durchsichtig, - ohne Beschichtung, - mit bearbeiteten Kanten (poliert), - zur Verwendung als Drehtür mit jeweils sechs Bohrungen, - - mit den Abmessungen: ca. 709 x 1972 mm, 834 x 1972 mm, 834 x 2097 mm, 959 x 1972 mm, 959 x 2097 mm, - zur Verwendung als Schiebetür ohne Bohrungen, - - mit den Abmessungen: ca. 935 x 2058 mm, 1060 x 2058 mm. "Vorgespanntes Einschichten-Sicherheitsglas, anderes als in den Unterpositionen 7007 1110 bis 7007 1920 genannte"
Härdat säkerhetsglas med måtten 76,3 cm x 34,6 cm (B x D) och en tjocklek av 6 mm. Glasskivan är avsedd att användas som hyllplan i t.ex. köksskåp. Varan består av två glasskivor förpackade tillsammans med medföljande hyllbärare i detaljhandelsförpackning.
Härdat säkerhetsglas med måtten 76,3 cm x 34,6 cm (B x D) och en tjocklek av 6 mm. Glasskivan är avsedd att användas som hyllplan i t.ex. köksskåp. Varan består av två glasskivor förpackade tillsammans med medföljande hyllbärare i detaljhandelsförpackning.
Härdat säkerhetsglas med måtten 76,3 cm x 34,6 cm (B x D) och en tjocklek av 6 mm. Glasskivan är avsedd att användas som hyllplan i t.ex. köksskåp. Varan består av två glasskivor förpackade tillsammans med medföljande hyllbärare i detaljhandelsförpackning.
Vorgespanntes Einschichten-Sicherheitsglas, sog. vorgespanntes Floatglas, Foto siehe Anlage, ein Warenmuster wurde nicht vorgelegt, die Einreihung erfolgt anhand der Antragsangaben, - Platte aus vorgespanntem Einschichten-Sicherheitsglas, - durchsichtig, - ohne Beschichtung, - mit einem gelaserten Motiv verziert, - mit bearbeiteten Kanten (poliert), - zur Verwendung als Drehtür mit jeweils sechs Bohrungen, - - mit den Abmessungen: ca. 709 x 1972 mm, 709 x 2097 mm, 834 x 1972 mm, 834 x 2097 mm, 959 x 1972 mm, 959 x 2097 mm, - zur Verwendung als Schiebetür ohne Bohrungen, - - mit den Abmessungen: ca. 935 x 2058 mm, 935 x 2183 mm. "Vorgespanntes Einschichten-Sicherheitsglas, anderes als in den Unterpositionen 7007 1110 bis 7007 1920 genannte"
Vorgespanntes Einschichten-Sicherheitsglas, sog. vorgespanntes Weißglas, Foto siehe Anlage, ein Warenmuster wurde nicht vorgelegt, die Einreihung erfolgt anhand der Antragsangaben, - Platte aus vorgespanntem Einschichten-Sicherheitsglas, - durchsichtig, - ohne Beschichtung, - mit einem gelaserten Motiv verziert, - mit bearbeiteten Kanten (poliert), - zur Verwendung als Drehtür mit jeweils sechs Bohrungen, - - mit den Abmessungen: ca. 709 x 1972 mm, 709 x 2097 mm, 834 x 1972 mm, 834 x 2097 mm, 959 x 1972 mm, 959 x 2097 mm, - zur Verwendung als Schiebetür ohne Bohrungen, - - mit den Abmessungen: ca. 935 x 2058 mm, 935 x 2183 mm. "Vorgespanntes Einschichten-Sicherheitsglas, anderes als in den Unterpositionen 7007 1110 bis 7007 1920 genannte"
Een zogenoemde screenprotector met -volgens opgave- onder andere de volgende kenmerken: - voor het beschermen tegen krassen en beschadigingen en het voorkomen van vingerafdrukken op de display van een specifiek type draagbaar spelconsole; - van gehard glas; - afmetingen 14 x 8 x 0,01 cm. Aangeboden tezamen met niet karakterbepalende goederen, waaronder een -met alcohol geïmpregneerd- schoonmaakdoekje.
Dle deklarovaných údajů se jedná o výrobek z tvrzeného skla, který slouží jako přední kryt (dotyková vrstva) klávesnice určené pro zabezpečovací systémy budov proti vloupání (klávesnice není předmětem této žádosti o ZISZ). Výrobek neobsahuje elektrické součástky a není ani povrstven vodivou vrstvou. Sklo nepřenáší mechanický tlak a nedochází tak k mechanickému stisknutí tlačítka. Klávesnice funguje na bázi kapacitních senzorů. Sklo je potištěno číslicemi a znakovými symboly a může být v různých barevných provedeních. Rozměry (mm): 62,9 x 91,9 x 1.
Notes that govern this classification
Zu Unterposition 7007 19: 1. Schutzglas für Smartphone-Bildschirme, aus getempertem Sicherheitsglas mit abgerundetem rechteckigem Körper mit Löchern für eine Kamera, einen Lautsprecher und einen Startknopf. Nachdem das Glas in die gewünschte Form geschnitten und gehärtet wurde, wird es beschichtet, um seine Leistungsfähigkeit zu verbessern (z. B. Infrarot (IR)-Selektivität, Antireflex (AR)- und Anti-Fingerabdruck (AF)-Beschichtungen). Es ist jedoch nicht mit elektrisch leitender Tinte bedruckt. Das Produkt soll in das Display bestimmter Smartphones eingebaut werden, um es vor äußeren Stößen und Kratzern zu schützen. Anwendung der Allgemeinen Vorschriften 1 und 6. 2. Schutzglas für Smart Kühlschränke aus getempertem Sicherheitsglas mit rechteckigem Körper mit abgerundeten Kanten. …
1. Zu Kapitel 70 gehören nicht: a) Waren der Position 3207 (z. B. Schmelzglasuren und andere verglasbare Massen, Glasfritten, anderes Glas in Form von Pulver, Granalien oder Flocken) (RV E7001A00); b) Waren des Kapitels 71 (z. B. Fantasieschmuck) (RV E7001B00); c) Kabel aus optischen Fasern der Position 8544, elektrische Isolatoren (Position 8546) oder Isolierteile der Position 8547 (RV E7001C00); d) Frontscheiben (Windschutzscheiben), Heckscheiben und andere Scheiben, gerahmt, für Fahrzeuge der Kapitel 86 bis 88 (RV E7001D00); e) Frontscheiben (Windschutzscheiben), Heckscheiben und andere Scheiben, auch gerahmt, mit Heizvorrichtungen oder anderen elektrischen oder elektronischen Vorrichtungen ausgerüstet, für Kraftfahrzeuge der Kapitel 86 bis 88 (RV E7001E00); f) optische Fasern, optisch bearbeitete optische Elemente, Injektionsspritzen, künstliche Augen, Thermometer, Barometer, Dichtem …
Subdivisions of this code
- 7007.19.80.12Uncoated
- 7007.19.80.18Single or double-side coated
- 7007.19.80.80Uncoated
- 7007.19.80.85Single or double-side coated
- 7007.19.80.86A ready-to-install, circular graded tempered glass of the cover of door assembly in washing machines with: -a light transmittance of 34,2 % or more but not more than 37,8 %, -a diameter of 477,2 mm or more but not more than 477,8 mm, -a thickness of 2,9 mm or more but not more than 3,5 mm, -a weight of 1345 g or more but not more than 1445 g, -3-zone structure including Euro Deep Gray colour printed zone
- 7007.19.80.95Other
Frequently asked questions
What does customs tariff code 7007.19.80 cover?
Code 7007.19.80 covers Other, anderes. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7007.19.80?
The third-country duty rate for 7007.19.80 is 3 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7007.19.80?
The first six digits form the HS code: 700719. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7007.19.80 have?
7007.19.80 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7007.19.80 sit in the tariff?
7007.19.80 sits in this hierarchy: 70 GLASS AND GLASSWARE > 7007 Safety glass, consisting of toughened (tempered) or laminated glass > 700719 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7007.19.80?
Yes. The EBTI database holds decisions on 7007.19.80, for example DEBTI45803/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 7007.19.80 change?
7007.19.80 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.