Customs tariff code 7019.13.00.92: Slivers and cords
Reference data as at 1 July 2026
Customs tariff code 7019.13.00.92 covers Slivers and cords. The third-country duty rate is 7 %, plus import VAT.
7019.13.00.92 is TARIC code in the EU customs tariff, in chapter 70. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7019.13.00.92
- Third-country duty
- 7 %
- Declarable
- No
- Binding rulings
- 2
Where this code sits in the tariff
- 70GLASS AND GLASSWARE
- 7019Glass fibres (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics)
- 7019.13Other yarn, slivers
- 7019.13.00Vorgarne (Lunten), Glasseidenstränge (Rovings), Garne und Stapelfasern und Matten daraus, andere Garne, Vorgarne (Lunten)
- 7019.13.00.92Slivers and cords
From HS code to customs tariff code 7019.13.00.92
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7 % | MFN |
| Algeria | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1A202Composite structures, other than those specified in 1A002, in the form of thin-walled tubes and having all of the following characteristics:
- 1C010"Fibrous or filamentary materials", as follows:
- 1C210'Fibrous or filamentary materials' or prepregs, other than those specified in 1C010.a., .b. or .e., as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Filato ritorto (torsione superiore a 5 giri/m) di colore bianco/verde chiaro. Il cavo è costituito da fibre di vetro in fiocco a 2 capi ritorti ad S rinforzati con filamento in vetro (E-glass), ed ha una densità lineare di 2000 Tex. Il filato viene utilizzato nella guarnizione per porte di stufe e forni, forni coke (acciaierie), isolamento termico per cavi elettrici, guarnizioni per porte di ispezione, isolazione termica dei cavi elettrici ed è ideale per temperature in continuo fino a 650 C° (E-glass). Il cavo viene presentato in rotoli da m 100 a m 200 o già tagliato in stoppini.
Filato ritorto (torsione superiore a 5 giri/m) di colore bianco/verde chiaro. Il cavo è costituito da fibre di vetro in fiocco a 2 capi ritorti ad S rinforzato con filamento in acciao inossidabile (SUS304) ed ha una densità lineare di 2100 Tex. Il filato viene utilizzato nelle guarnizioni per porte di stufe e forni, forni coke (acciaierie), isolamento termico per cavi elettrici, guarnizioni per porte di ispezione, isolazione termica dei cavi elettrici ed è ideale per temperature in continuo fino a 1000 C°. Il cavo viene presentato in rotoli da m 100 a m 200 o già tagliato in stoppini.
Notes that govern this classification
Zu Position 7019: Siehe die Erläuterungen zu Position 7019 des HS. Zu Unterposition 7019 13 00: Siehe die Erläuterungen zu Unterposition 7019 13 des HS.
Zu Unterposition 7019 13 Hierher gehören auch Vorgarne (Lunten). Ein Vorgarn besteht aus kurzen Stapelfasern, die im Allgemeinen weniger als 380 mm lang sind. Die Stapelfasern sind lose parallel zu einem seilartigen Strang mit keiner oder geringer Drehung (weniger als 5 Drehungen je Meter) angeordnet. Vorgarne werden im Allgemeinen zur Herstellung von Stapelfasergarnen verwendet, können aber auch zum Herstellen von Drähten und Kabeln verwendet werden. Die Garne dieser Unterposition sind gezwirnt und bestehen entweder aus Endlosfilamenten oder aus Stapelfasern. Die Garne werden im Allgemeinen entweder auf Kunststoffspulen oder auf metallischen Kabelbäumen geliefert. Sie können auch texturiert oder voluminisiert sein. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 255. Sitzung des Ausschusses für den Zollkodex vom 24. bis 26. April 2024: Warenbeschreibung: Insektenschutzgitter (gerahmtes Moskitonetz) bestehend aus einem Gewebe aus Glasfasern, vier Aluminiumprofilen und vier Eckspangen aus Kunststoff für den Rahmen, Dichtungsband aus Kunststoff (PVC), vier Befestigungen aus unedlen Metall für das Fenster, zwei Kunststoffbefestigungen zur Befestigung des Gitters im Rahmen und Werkzeugsatz für die Montage, aufgemacht in Verpackungen für den Einzelverkauf. …
1. Zu Kapitel 70 gehören nicht: a) Waren der Position 3207 (z. B. Schmelzglasuren und andere verglasbare Massen, Glasfritten, anderes Glas in Form von Pulver, Granalien oder Flocken) (RV E7001A00); b) Waren des Kapitels 71 (z. B. Fantasieschmuck) (RV E7001B00); c) Kabel aus optischen Fasern der Position 8544, elektrische Isolatoren (Position 8546) oder Isolierteile der Position 8547 (RV E7001C00); d) Frontscheiben (Windschutzscheiben), Heckscheiben und andere Scheiben, gerahmt, für Fahrzeuge der Kapitel 86 bis 88 (RV E7001D00); e) Frontscheiben (Windschutzscheiben), Heckscheiben und andere Scheiben, auch gerahmt, mit Heizvorrichtungen oder anderen elektrischen oder elektronischen Vorrichtungen ausgerüstet, für Kraftfahrzeuge der Kapitel 86 bis 88 (RV E7001E00); f) optische Fasern, optisch bearbeitete optische Elemente, Injektionsspritzen, künstliche Augen, Thermometer, Barometer, Dichtem …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7019.13.00.92 cover?
Code 7019.13.00.92 covers Slivers and cords. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7019.13.00.92?
The third-country duty rate for 7019.13.00.92 is 7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7019.13.00.92?
The first six digits form the HS code: 701913. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7019.13.00.92 have?
7019.13.00.92 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7019.13.00.92 sit in the tariff?
7019.13.00.92 sits in this hierarchy: 70 GLASS AND GLASSWARE > 7019 Glass fibres (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics) > 701913 Other yarn, slivers > 70191300 Vorgarne (Lunten), Glasseidenstränge (Rovings), Garne und Stapelfasern und Matten daraus, andere Garne, Vorgarne (Lunten). The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7019.13.00.92?
Yes. The EBTI database holds decisions on 7019.13.00.92, for example ITBTI2025-0982. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7019.13.00.92 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7019.13.00.92 to 1A202, 1C010, 1C210. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7019.13.00.92 change?
7019.13.00.92 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.