Customs tariff code 7108.13.10.00: Stäbe, Drähte und Profile, massiv; Bleche und Bänder, mit einer Dicke (ohne Unterlage)…
Reference data as at 1 July 2026
Customs tariff code 7108.13.10.00 covers Stäbe, Drähte und Profile, massiv; Bleche und Bänder, mit einer Dicke (ohne Unterlage) von mehr als 0,15 mm. The third-country duty rate is 0 %, plus import VAT.
7108.13.10.00 is TARIC code in the EU customs tariff, in chapter 71. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7108.13.10.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 71NATURAL OR CULTURED PEARLS, PRECIOUS OR SEMI-PRECIOUS STONES, PRECIOUS METALS, METALS CLAD WITH PRECIOUS METAL, AND ARTICLES THEREOF; IMITATION JEWELLERY; COIN
- 7108Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form
- 7108.13Other semi-manufactured forms
- 7108.13.10Bars, rods, wire and sections; plates; sheets and strips of a thickness, excluding any backing, exceeding 0,15 mm
- 7108.13.10.00Stäbe, Drähte und Profile, massiv; Bleche und Bänder, mit einer Dicke (ohne Unterlage) von mehr als 0,15 mm
From HS code to customs tariff code 7108.13.10.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| San Marino | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C226Tungsten, tungsten carbide, and alloys containing more than 90 % tungsten by weight, other than that specified in 1C117, having both of the following characteristics:
- 1C241Rhenium, and alloys containing 90 % by weight or more rhenium; and alloys of rhenium and tungsten containing 90 % by weight or more of any combination of rhenium and tungsten, other than those specified in 1C226, having both of the following characteristics:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Es handelt sich bei gegenständlicher Ware um ein Halbzeug in Form eines massiven Golddrahtes. Der goldfarbene Draht (Dicke: 0,03 mm) ist nicht überzogen. Die Gestellung erfolgt in verschiedenen Längen auf einer Spule. Lt. Antragsteller wird der Draht für die Hörimplantatfertigung verwendet. (Abbildung siehe Anlage) (Alle Angaben lt. Antragsteller)
Tin Gold Wire For medical devices 80% GOLD, 20% TIN
Gold-Plättchen Bei der Ware handelt es sich nach den Angaben um durch Gießen, Walzen, Ausstanzen und Prägen hergestellte, massive Flacherzeugnisse (Plättchen) mit einer Dicke (ohne Unterlage) von mehr als 0,15 mm. Die Plättchen weisen einen rechteckigem Querschnitt mit abgerundeten Ecken und Kanten auf und bestehen aus Feingold (999,9/1000) mit einem handelsüblichen Gewicht von 5 g, 10 g, 20 g, 1 oz, 50 g bzw. 100 g. Auf der Oberseite der Plättchen sind das Material, das Gewicht, die Feinheit, die Seriennummer und eine Herstellerangabe eingeprägt. Die Erzeugnisse können auch mit bildlichen Darstellungen versehen sein. Die Waren befinden sich in einer Blisterpackung. Die Ware ist aufgrund ihrer Beschaffenheit als "als Halbzeug (Bleche), aus Gold, mit einer Dicke (ohne Unterlage) von mehr als 0,15 mm" in den TARIC-Code 7108 1310 00 einzureihen.
PARALLELEPIPEDE, D’OR PUR, OBTENU PAR PRESSAGE PUIS LAMINAGE D’UN LINGOT. SUITE A L’ETAPE DE LAMINAGE, IL EST PROCEDE A UN RECUIT DE CRISTALLISATION AVANT QUE L’OR NE SUBISSE UNE SIMPLE DECOUPE POUR METTRE LA PIECE AUX COTES FINALES. LE PARALLELEPIPEDE EST DESTINE A ETRE UTILISE DANS LA FABRICATION DE CIBLES DE PULVERISATION CATHODIQUE EN METAUX PRECIEUX POUR L’INDUSTRIE DES SEMI-CONDUCTEURS.
Es handelt sich um im Wesentlichen durch Gießen, Walzen, Ausstanzen und Prägen hergestellte, massive Flacherzeugnisse (Plättchen) mit einer Dicke (ohne Unterlage) von mehr als 0,15 mm und mit rechteckigem Querschnitt mit abgerundeten Ecken und Kanten aus Feingold (999,9/1000) mit einem handelsüblichen Gewicht von 5 g, 10 g, 20 g, 1 oz, 50 g bzw. 100 g. Auf der Oberseite der Plättchen sind das Material, das Gewicht, die Feinheit, die Seriennummer und eine Herstellerangabe eingeprägt. Die Erzeugnisse können auch mit bildlichen Darstellungen versehen sein. Die Waren befinden sich in einer Blisterpackung. - Antragstellerangaben - Eine Einreihung in die Unterposition (KN) 7108 1380 kommt nicht in Betracht, da die Goldplättchen zolltarifrechtlich als Bleche mit einer Dicke von mehr als 0,15 mm bereits von der Unterposition (KN) 7108 1310 erfasst sind. Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Gold, als Halbzeug (Bleche), mit einer Dicke (ohne Unterlage) von mehr als 0,15 mm" zum TARIC-Code 7108 1310 00.
TIN GOLD WIRE (80% GOLD, 20% TIN) FOR MEDICAL APPLICATION. 0.4MM (0.015") DIAMETER WIDE
Es handelt sich um im Wesentlichen durch Gießen, Walzen, Ausstanzen und Prägen hergestellte, massive Flacherzeugnisse (Plättchen) mit einer Dicke (ohne Unterlage) von mehr als 0,15 mm und mit rechteckigem Querschnitt mit abgerundeten Ecken und Kanten aus Feingold (999,9/1000) mit einem handelsüblichen Gewicht von 5 g, 10 g, 20 g, 1 oz, 50 g bzw. 100 g. Auf der Oberseite der Plättchen sind das Material, das Gewicht, die Feinheit, die Seriennummer und eine Herstellerangabe eingeprägt. Die Erzeugnisse können auch mit bildlichen Darstellungen versehen sein. Die Waren befinden sich in einer Blisterpackung. - Antragstellerangaben - Eine Einreihung in die Unterposition (KN) 7108 1380 kommt nicht in Betracht, da die Goldplättchen zolltarifrechtlich als Bleche mit einer Dicke von mehr als 0,15 mm bereits von der Unterposition (KN) 7108 1310 erfasst sind. Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Gold, als Halbzeug (Bleche), mit einer Dicke (ohne Unterlage) von mehr als 0,15 mm" zum TARIC-Code 7108 1310 00.
TIN GOLD WIRE (80% GOLD, 20% TIN) FOR MEDICAL APPLICATION 0.4MM (0.015") DIAMETER WIDE
Notes that govern this classification
Nationale Entscheidungen und Hinweise (NEH) Internationale Entscheidungen und Hinweise (IEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 197. Sitzung des Ausschusses für den Zollkodex vom 20. bis 22. Februar 2019: Warenbeschreibung: Goldplättchen mit einem Gewicht zwischen 5 und 100 g. Das Gold wird geschmolzen und dann ausgewalzt, wodurch die gewünschte Dicke erzielt wird. Danach wird das Produkt in die gewünschte Größe und Form zugeschnitten. Abschließend werden die Plättchen geprägt, d. h. sie werden mittels eines auf einer Presse angebrachten Prägestempels gekennzeichnet, um so auf der Oberfläche den Feingehalt, den amtlichen Stempel und die Seriennummer anzubringen. Die Waren können durch Hinzufügen einer bildlichen Darstellung individuell gestaltet werden. …
1. Zu Kapitel 71 gehören, vorbehaltlich der Anmerkung 1 A) zu Abschnitt VI und der nachstehenden Ausnahmen, alle Waren, die ganz oder teilweise bestehen: a) aus echten Perlen oder Zuchtperlen oder aus Edelsteinen oder Schmucksteinen (natürlichen, synthetischen oder rekonstituierten) (RV E7101A00) oder b) aus Edelmetallen oder Edelmetallplattierungen (RV E7101B00). 2. A) Zu den Positionen 7113, 7114 und 7115 gehören nicht Waren, die Edelmetalle oder Edelmetallplattierungen nur als geringfügige Verzierungen oder als unwesentliche Zutaten (z. B. Monogramme, Ringbeschläge, Kanten) enthalten; auf diese Waren findet die vorstehende Anmerkung 1 b) keine Anwendung (RV E7102A00). B) Zu Position 7116 gehören nur Waren, die Edelmetalle oder Edelmetallplattierungen nicht oder nur als geringfügige Verzierungen oder unwesentliche Zutaten enthalten (RV E7102B00). 3. …
Subdivisions of this code
- 7108.13.10.00.1Goldbarren und -plättchen, bestehend aus Feingold von mindestens 995 Tausendsteln mit eingestanzter oder geprägter Angabe des Herstellers, des Feingoldgehalts und des Gewichts (auf das Herstellungsverfahren und auf die Form des Goldes kommt es nicht an, sofern es vom Goldmarkt akzeptiert wird), auch mit geprägten bildlichen Darstellungen versehen, als Anlagegold. (vgl. VSF Z 8101 Abschnitt VI Nr. 2 Abs. 85)
- 7108.13.10.00.9andere
Frequently asked questions
What does customs tariff code 7108.13.10.00 cover?
Code 7108.13.10.00 covers Stäbe, Drähte und Profile, massiv; Bleche und Bänder, mit einer Dicke (ohne Unterlage) von mehr als 0,15 mm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7108.13.10.00?
The third-country duty rate for 7108.13.10.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7108.13.10.00?
The first six digits form the HS code: 710813. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7108.13.10.00 have?
7108.13.10.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7108.13.10.00 sit in the tariff?
7108.13.10.00 sits in this hierarchy: 71 NATURAL OR CULTURED PEARLS, PRECIOUS OR SEMI-PRECIOUS STONES, PRECIOUS METALS, METALS CLAD WITH PRECIOUS METAL, AND ARTICLES THEREOF; IMITATION JEWELLERY; COIN > 7108 Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form > 710813 Other semi-manufactured forms > 71081310 Bars, rods, wire and sections; plates; sheets and strips of a thickness, excluding any backing, exceeding 0,15 mm. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7108.13.10.00?
Yes. The EBTI database holds decisions on 7108.13.10.00, for example ATBTI2025000784-DEC. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7108.13.10.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7108.13.10.00 to 1C226, 1C241. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7108.13.10.00 change?
7108.13.10.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.