Customs tariff code 7208.27.00.00.0: Of a thickness of less than 3 mm, andere, in Rollen (Coils), nur warmgewalzt, gebeizt…
Reference data as at 6 July 2026
Customs tariff code 7208.27.00.00.0 covers Of a thickness of less than 3 mm, andere, in Rollen (Coils), nur warmgewalzt, gebeizt, mit einer Dicke von weniger als 3 mm. The third-country duty rate is 0 %, plus import VAT.
7208.27.00.00.0 is national commodity code in the EU customs tariff, in chapter 72. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7208.27.00.00.0
- Third-country duty
- 0 %
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 72IRON AND STEEL
- 7208Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
- 7208.27Of a thickness of less than 3 mm
- 7208.27.00.00.0Of a thickness of less than 3 mm, andere, in Rollen (Coils), nur warmgewalzt, gebeizt, mit einer Dicke von weniger als 3 mm
From HS code to customs tariff code 7208.27.00.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| Korea, Republic of (South Korea) | 0 % | Tariff preference |
| Kenya | 0 % | Tariff preference |
| Ivory Coast | 0 % | Tariff preference |
| Preferential origin in accordance with the Agreement in the… | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| Türkiye | - | All other companies | Decision 0142/96 | - |
| ERGA OMNES | - | All other companies | Regulation 1036/16 | - |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
| Egypt | 11.7 % | Other | Regulation 1919/25 | - |
| Japan | 30 % | Other | Regulation 1919/25 | - |
| Egypt | Cond: A cert: D-008 (01):11.700 % ; A (01):11.700 % | Ezz Steel Company | Regulation 1919/25 | - |
| Japan | Cond: A cert: D-008 (01):30.000 % ; A (01):30.000 % | Nippon Steel Corporation | Regulation 1919/25 | - |
| Japan | Cond: A cert: D-008 (01):6.900 % ; A (01):30.000 % | Tokyo Steel Co. Ltd. | Regulation 1919/25 | - |
| Japan | Cond: A cert: D-008 (01):29.800 % ; A (01):30.000 % | Daido Steel Co., Ltd. | Regulation 1919/25 | - |
Open investigations, where duties may later apply: Türkiye
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Zu Unterpositionen 7208 10, 7208 25, 7208 26, 7208 27, 7208 36, 7208 37, 7208 38, 7208 39, 7208 40, 7208 51, 7208 52, 7208 53 und 7208 54: Warmgewalzte Erzeugnisse dieser Unterpositionen können zusätzlich noch folgende Bearbeitungen oder Oberflächenbearbeitungen erfahren haben: 1) Richten in warmem Zustand 2) Glühen, Härten (Abschrecken), Anlassen, Vergüten, Aufkohlen, Nitrieren (Aufsticken) und ähnliche Wärmebehandlungen zur Verbesserung der Metalleigenschaften. 3) Die in den Erläuterungen zu Pos. 7208 in Absatz 2 Ziffern 1) und 2) beschriebenen Oberflächenbearbeitungen, soweit nichts gegenteiliges gesagt ist. Das Entzundern kann erfolgen: a) durch Säure- oder Reduktionsbehandlung (chemische oder thermische Verfahren), auch im Kalkmilchverfahren (Kalken); b) durch mechanische Verfahren (Hobeln, Grobschleifen, Grobschmirgeln, Sandstrahlen usw.). …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes - 180. Sitzung des Ausschusses für den Zollkodex vom 3. bis 6. Juli 2017): Warenbeschreibung: Warmgewalzte Platten aus nicht legiertem Stahl in unterschiedlichen Größen und Dicken, rechteckig oder in Trapezform, die längere Seite ist leicht gebogen. Sie sind für den Bau von Windkrafttürmen bestimmt. Die Platten wurden durch folgende Verfahren bearbeitet: Zuschneiden auf die passende Größe, Abschrägen der Kanten zum Schweißen oder für die Montage, Anstreichen zum Schutz gegen Korrosion während der Beförderung und Kennzeichnung jedes einzelnen Blechs aus Gründen der Rückverfolgbarkeit und zur Bestimmung der Position des Bleches in dem Turm. Sie werden lose übereinander gestapelt gestellt. …
1. Im Sinne des Kapitels 72 - und in Bezug auf die Buchstaben d), e) und f) in der Nomenklatur insgesamt - gelten als: a) Roheisen Eisen-Kohlenstoff-Legierungen, die gewöhnlich nicht plastisch verformbar sind, mit einem Kohlenstoffgehalt von mehr als 2 GHT und die eines oder mehrere andere Elemente mit folgenden Anteilen enthalten können: - 10 GHT oder weniger Chrom, - 6 GHT oder weniger Mangan, - 3 GHT oder weniger Phosphor, - 8 GHT oder weniger Silicium, - 10 GHT oder weniger andere Elemente insgesamt (RV E7201A00). b) Spiegeleisen Eisen-Kohlenstoff-Legierungen, die mehr als 6 bis 30 GHT Mangan enthalten und die im Übrigen der Begriffsbestimmung der Anmerkung 1 a) entsprechen (RV E7201B00). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Frequently asked questions
What does customs tariff code 7208.27.00.00.0 cover?
Code 7208.27.00.00.0 covers Of a thickness of less than 3 mm, andere, in Rollen (Coils), nur warmgewalzt, gebeizt, mit einer Dicke von weniger als 3 mm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7208.27.00.00.0?
The third-country duty rate for 7208.27.00.00.0 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7208.27.00.00.0?
The first six digits form the HS code: 720827. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7208.27.00.00.0 have?
7208.27.00.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7208.27.00.00.0 sit in the tariff?
7208.27.00.00.0 sits in this hierarchy: 72 IRON AND STEEL > 7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated > 720827 Of a thickness of less than 3 mm. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7208.27.00.00.0?
The EBTI database currently holds no valid decisions on 7208.27.00.00.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7208.27.00.00.0 covered by CBAM?
Yes. 7208.27.00.00.0 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7208.27.00.00.0?
Yes. Trade defence measures are in force on 7208.27.00.00.0, covering origin Countries subject to safeguard measures, Türkiye, ERGA OMNES, Egypt, Japan. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7208.27.00.00.0 change?
7208.27.00.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.