Customs tariff code 7210.49.00.20: Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with…
Reference data as at 1 July 2026
Customs tariff code 7210.49.00.20 covers Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips. The third-country duty rate is 0 %, plus import VAT.
7210.49.00.20 is TARIC code in the EU customs tariff, in chapter 72. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7210.49.00.20
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 6
Where this code sits in the tariff
- 72IRON AND STEEL
- 7210Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
- 7210.49Other
- 7210.49.00anders verzinkt, andere
- 7210.49.00.20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
From HS code to customs tariff code 7210.49.00.20
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| Korea, Republic of (South Korea) | 0 % | Tariff preference |
| Kenya | 0 % | Tariff preference |
| Ivory Coast | 0 % | Tariff preference |
| Preferential origin in accordance with the Agreement in the… | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| Türkiye | - | All other companies | Decision 0142/96 | - |
| ERGA OMNES | - | All other companies | Regulation 1036/16 | - |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
| China | Cond: A cert: D-008 (01):27.900 % ; A (01):27.900 % | Zhangjiagang Yangtze River Cold Rolled Sheet Co., Ltd, Zhangjiagang | Regulation 0819/24 | - |
| China | Cond: A cert: D-008 (01):27.800 % ; A (01):27.900 % | Handan Iron & Steel Group Han-Bao Co., Ltd | Regulation 0819/24 | - |
| China | Cond: A cert: D-008 (01):27.800 % ; A (01):27.900 % | Hesteel Co., Ltd. Tangshan Branch | Regulation 0819/24 | - |
| China | Cond: A cert: D-008 (01):17.200 % ; A (01):27.900 % | Shougang Jingtang United Iron & Steel Co., Ltd | Regulation 0819/24 | - |
| Russian Federation | Cond: A cert: D-008 (01):10.300 % ; A (01):37.400 % | Novolipetsk Steel | Regulation 1395/22 | - |
| Russian Federation | Cond: A cert: D-008 (01):36.600 % ; A (01):37.400 % | Public Joint Stock Company Magnitogorsk Iron Steel Works (PJSC MMK) | Regulation 1395/22 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Plochý valcovaný zvitok (cievka) z nelegovanej ocele DX51D, upokojenej hliníkom, potiahnutej zinkom, chemicky pasivovanej, s obsahom viac ako 0,015 ale nie viac ako 0,17 %C, menej ako 0,015 ale nie viac ako 0,1 %Al, menej ako 0,045 %Nb, menej ako 0,010 %Ti a menej ako 0,010 %V. Rôznych priemerov: 508 mm alebo 610 mm. Hrúbka: od 0,45 do 1,00 mm. Šírka: 1072 mm alebo 1210 mm. Hmotnosť cievky: 20-23 ton (ak nie je 8-12 m). Tolerancie množstva: ±5 na riadkovú položku, celkovo ±5 %.
Stahlblech aus nicht legiertem Stahl Gemäß Antragsangaben handelt es sich bei der Ware um feuerverzinkte Stahlbleche aus unlegiertem Stahl der Werkstoffe DX51D, DX52D, DX53D, S280GD, S320GD, S350GD, S390GD abweichend zur Norm jeweils mit einem Titangehalt von 0,011 bis weniger als 0,05 GHT. Die Ware hat eine Breite von mehr als 600 mm und wird in Coils gehandelt. Die Zinkauflage beträgt 100, 140, 200, 275, 300 oder 600 g/m² oder andere Zinkauflage ist möglich. Die vZTA ist nur gültig für Stahl mit einem Mangangehalt von weniger als 1,65 GHT. Die Ware ist als flachgewalzte Erzeugnisse aus Eisen oder nicht legiertem Stahl, mit einer Breite von 600 mm oder mehr, plattiert oder überzogen, anders verzinkt, andere, schmelztauchbeschichtet mit Zink und/oder Aluminium, jedoch nicht mit anderen Metallen, in den TARIC-Code 7210 4900 20 einzureihen.
Blacha ze stali niestopowej, oznaczonej symbolem KS-SGCD1 lub EN-DX51D, uspokojonej aluminium. Wyrób walcowany, o płaskiej powierzchni, ocynkowany ogniowo, pasywowany chemicznie, o pełnym prostokątnym (innym niż kwadratowy) przekroju poprzecznym, o szerokości od 600 mm do 1550 mm, grubości od 0,28 mm do 4 mm, długości od 200 m do 4450 m, zwinięty w krąg. Według wnioskodawcy - stal, z której wykonano przedmiot wniosku zawiera 0,015 % lub więcej, ale nie więcej niż 0,170 % masy węgla, 0,015 % lub więcej, ale nie więcej niż 0,100 % masy aluminium, nie więcej niż 0,045 % masy niobu, nie więcej niż 0,010 % masy tytanu i nie więcej niż 0,010 % masy wanadu.
Conform descrierii solicitantului şi a fotografiei publicate în baza de date, produsul reprezintă produse laminate plate (tablă din oţel nealiat). Este obţinut prin laminare la cald. Lăţimea produsului este de 640 mm. Produsul este galvanizat cu zinc, fără alte metale. Procedeul folosit este prin imersie la cald. Tabla este calmată cu aluminiu, pasivată chimic. Se prezintă în rulouri. Compoziţia chimică: produsul conţine, printre altele, carbon-între 0.0369% şi 0.0495, titan-între 0.0006 şi 0.0015%, aluminiu-între 0.0302% şi 0.0369%, niobiu-între 0.0002% şi 0.0006%, vanadiu-între 0.0011% şi 0.0043%. Greutatea unui rulou: 5000-8000 kg. Grosimea tablei: 0,35-1,2 mm. Tabla nu este ondulată.
Blacha ze stali niestopowej, walcowana na zimno, o pełnym przekroju poprzecznym prostokątnym (innym niż kwadratowy), o szerokości od 900 mm do 1500 mm, o grubości od 0,3 mm do 2 mm, o długości od 100 m do 8000 m, zwinięta w krąg o masie od 100 kg do 22 ton, ocynkowana ogniowo, pasywowana chemicznie. Stal uspokojona aluminium, zawierająca m.in. 0,07% węgla, 0,033% aluminium, niezawierająca niobu, tytanu i wanadu.
Blacha ze stali niestopowej oznaczonej symbolem DX51D uspokojonej aluminium, walcowana, o płaskiej powierzchni, ocynkowana ogniowo, pasywowana chemicznie, o pełnym prostokątnym (innym niż kwadratowy) przekroju poprzecznym, o szerokości powyżej 600 mm, zwinięta w krąg. Według wnioskodawcy, wyrób został wykonany zgodnie z normą techniczną EN 10346:2015. Masowa zawartość węgla w tej stali wynosi 0,039%, aluminium 0,035%, niobu, tytanu i wanadu, poniżej 0,01% (dla każdego pierwiastka osobno).
Notes that govern this classification
Zu Unterpositionen der Position 7210: Bei Anwendung der Unterpositionen der Position 7210 sind Erzeugnisse, die mehrfach aufeinanderfolgend unterschiedlich überzogen oder plattiert wurden, nach der Bearbeitung einzureihen, die sie zuletzt erfahren haben. Jedoch werden chemische Oberflächenbehandlungen wie Chromatieren nicht als letzte Bearbeitung angesehen. Zu Unterpositionen 7210 30, 7210 41 und 7210 49: Die Erzeugnisse der Unterposition 7210 30 sind den Bearbeitungen unterzogen worden wie sie in den Erläuterungen zu diesem Kapitel Abschnitt „Allgemeines“ Teil IV C) 2) Absatz d) 4. zweiter Anstrich beschrieben sind; die Waren der Unterpositionen 7210 41 und 7210 49 wurden nach einem der anderen in Teil IV C) 2) Absatz d) 4. dieser Erläuterungen Abschnitt „Allgemeines“ beschriebenen Bearbeitungsverfahren behandelt. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2023/1427 der Kommission vom 4. Juli 2023 (ABl. EU Nr. L 175/3) (RV L 23/1427) Flachgewalzte Bleche aus unlegiertem Stahl mit einer Breite zwischen 1 060 und 1 250mm, auf Spulen aufgerollt. Die Bleche sind auf beiden Seiten mehrfach überzogen. Bei dem Überzug, der mit dem Stahl in Berührung kommt, handelt es sich um Aluminium-Zink (die Bleche sind feuerverzinkt, und die Dicke einer Aluminium-Zink-Schicht beträgt auf beiden Seiten etwa 4 μm). Dieser Überzug verleiht dem Stahl eine größere Beständigkeit gegen atmosphärische Korrosion. Danach werden die Bleche vorgestrichen. Auf einer Seite erhalten sie eine Polymergrundierung (mit einer Dicke von etwa 5 μm) und eine Polymerdeckschicht (mit einer Dicke von etwa 16 μm). …
1. Im Sinne des Kapitels 72 - und in Bezug auf die Buchstaben d), e) und f) in der Nomenklatur insgesamt - gelten als: a) Roheisen Eisen-Kohlenstoff-Legierungen, die gewöhnlich nicht plastisch verformbar sind, mit einem Kohlenstoffgehalt von mehr als 2 GHT und die eines oder mehrere andere Elemente mit folgenden Anteilen enthalten können: - 10 GHT oder weniger Chrom, - 6 GHT oder weniger Mangan, - 3 GHT oder weniger Phosphor, - 8 GHT oder weniger Silicium, - 10 GHT oder weniger andere Elemente insgesamt (RV E7201A00). b) Spiegeleisen Eisen-Kohlenstoff-Legierungen, die mehr als 6 bis 30 GHT Mangan enthalten und die im Übrigen der Begriffsbestimmung der Anmerkung 1 a) entsprechen (RV E7201B00). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7210.49.00.20 cover?
Code 7210.49.00.20 covers Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7210.49.00.20?
The third-country duty rate for 7210.49.00.20 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7210.49.00.20?
The first six digits form the HS code: 721049. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7210.49.00.20 have?
7210.49.00.20 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7210.49.00.20 sit in the tariff?
7210.49.00.20 sits in this hierarchy: 72 IRON AND STEEL > 7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated > 721049 Other > 72104900 anders verzinkt, andere. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7210.49.00.20?
Yes. The EBTI database holds decisions on 7210.49.00.20, for example SKBTI13374/22/21. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7210.49.00.20 covered by CBAM?
Yes. 7210.49.00.20 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7210.49.00.20?
Yes. Trade defence measures are in force on 7210.49.00.20, covering origin Countries subject to safeguard measures, Türkiye, ERGA OMNES, China, Russian Federation. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7210.49.00.20 change?
7210.49.00.20 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.