Customs tariff code 7215.90.00.90: Other
Reference data as at 1 July 2026
Customs tariff code 7215.90.00.90 covers Other. The third-country duty rate is 0 %, plus import VAT.
7215.90.00.90 is TARIC code in the EU customs tariff, in chapter 72. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7215.90.00.90
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 72IRON AND STEEL
- 7215Other bars and rods of iron or non-alloy steel
- 7215.90Other
- 7215.90.00anderer
- 7215.90.00.90Other
From HS code to customs tariff code 7215.90.00.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| Korea, Republic of (South Korea) | 0 % | Tariff preference |
| Kenya | 0 % | Tariff preference |
| Ivory Coast | 0 % | Tariff preference |
| Preferential origin in accordance with the Agreement in the… | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Tooteks on 1,2 mm läbimõõduga terasest tsingitud traat, mis on lõigatud kindlaks pikkuseks ja pakendatud 5kg kimbuna karpi. Toode on mõeldud erinevate asjade omavahel kokku sidumiseks.
Tooteks on 1,2 mm läbimõõduga terasest tsingitud traat, mis on lõigatud kindlaks pikkuseks ja pakendatud 5kg kimbuna karpi. Toode on mõeldud erinevate asjade omavahel kokku sidumiseks.
Tooteks on 1,2 mm läbimõõduga terasest tsingitud traat, mis on lõigatud kindlaks pikkuseks ja pakendatud 5kg kimbuna karpi. Toode on mõeldud erinevate asjade omavahel kokku sidumiseks.
En ingjutningsdubb som enligt uppgift för över laster i fogar från ett betongelement till ett annat. Produkten är tillverkad av olegerat stål, S355J2, som sedan varmförzinkats och består av en slät stång, så kallat dubb, vars kortändar har avfasade kanter. Produkten finns i två längder, 500 mm och 600 mm, och en diameter om 20 mm. Användningsområdet är enligt uppgift att skapa en lastupptagande koppling mellan betongelementen så de rör sig enhetligt mellan varandra. Det vill säga att produkten används endast för lyft och inte för infästning. Produkten gjuts in i betong, centrerat i betongelementets tvärsnitt. Produkten monteras i kompatibel plasthylsa för att möjliggöra rörelse i en led och på så vis undvika oönskade spänningar i kopplingen mellan två bjälklag.
Λεπτές μεταλλικές ράβδοι, διαμέτρου 0,90mm οι οποίες διατίθενται σε μήκη 36cm και 45cm. Έχουν παραχθεί με ψυχρή έλαση και φέρουν επικάλυψη ψευδαργύρου. Χρησιμοποιούνται για το δέσιμο οπλισμού στις οικοδομές. Συσκευάζονται σε πακέτα των 12kg.
Barra de acero al carbono sin alear (C45). Su destino es constituir el vástago del pistón de un cilindro hidráulico, para lo que es necesario realizar un posterior mecanizado/roscado de uno de los extremos de la barra para facilitar su acople con el pistón. La barra está normalizada, rectificada y cromada, con diferentes diámetros (20 a 200 mm) y una longitud de 6 ó 7,5 m, sin ningún otro trabajo de superficie o de conformación (perforaciones, acanaladuras, estallamientos, etc.).
Barras de acero al carbono sin alear (C45) (ver composición) obtenidas por laminación en frío, rectificadas y pulidas con un contenido de carbono superior o igual al 0,25 % pero inferior al 0,86 % aptas para mecanizar, de sección circular constante y maciza en toda su longitud con un diámetro comprendido entre 20 y 180 mm y una longitud entre 6.000 y 7.500 mm, sin ningún otro tipo de trabajo en la superficie o de conformación, con los extremos rectos a 90º y protegidas exteriormente con plástico o cartón. Estas barras se usan principalmente para la fabricación de bulones o para la fabricación de piezas cortadas y mecanizadas, guías y ejes lineales.
Stabstahl aus nicht legiertem Stahl; Steckdraht, oberflächenbearbeitet Bei der Ware handelt es sich um einen Stab aus nicht legiertem Stahl (SAE 1006). Die Ware hat einen kreisförmigen Querschnitt mit einem Durchmesser von 0,30 mm bis 2,00 mm. Die Ware liegt in geraden Längen vor. Die Ware ist durch Kaltziehen hergestellt und geglüht worden. Die Ware ist zusätzlich verzinkt oder mit grünem Lack überzogen. Beide Oberflächenbehandlungen sind auch gleichzeitig möglich. Es handelt sich nicht um Draht der Pos. 7217, da die Ware nicht in Rollen vorliegt. Die Ware wird nach ihrer stofflichen Beschaffenheit als anderer Stabstahl aus Eisen oder nicht legiertem Stahl, anderer, in den TARIC-Code 7215 9000 90 eingereiht.
Notes that govern this classification
Zu Unterposition 7215 90 00: Hierher gehört geschmiedeter, warmgewalzter, warmgezogener, warmstranggepresster und kaltfertiggestellter Stabstahl, der 1. Oberflächenbearbeitungen erfahren hat, die über die in den Erläuterungen zu Position 7214 des HS, vierter Absatz Ziffern 1 bis 3, beschriebenen Behandlungen hinausgehen, z. B. Polieren, Lüstrieren, künstliches Oxidieren, Phosphatieren, Oxalatieren, Überziehen und Plattieren, oder 2. mechanische Bearbeitungen, wie Bohren oder Kalibrieren, erfahren hat. (entfallen) bis
1. Im Sinne des Kapitels 72 - und in Bezug auf die Buchstaben d), e) und f) in der Nomenklatur insgesamt - gelten als: a) Roheisen Eisen-Kohlenstoff-Legierungen, die gewöhnlich nicht plastisch verformbar sind, mit einem Kohlenstoffgehalt von mehr als 2 GHT und die eines oder mehrere andere Elemente mit folgenden Anteilen enthalten können: - 10 GHT oder weniger Chrom, - 6 GHT oder weniger Mangan, - 3 GHT oder weniger Phosphor, - 8 GHT oder weniger Silicium, - 10 GHT oder weniger andere Elemente insgesamt (RV E7201A00). b) Spiegeleisen Eisen-Kohlenstoff-Legierungen, die mehr als 6 bis 30 GHT Mangan enthalten und die im Übrigen der Begriffsbestimmung der Anmerkung 1 a) entsprechen (RV E7201B00). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7215.90.00.90 cover?
Code 7215.90.00.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7215.90.00.90?
The third-country duty rate for 7215.90.00.90 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7215.90.00.90?
The first six digits form the HS code: 721590. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7215.90.00.90 have?
7215.90.00.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7215.90.00.90 sit in the tariff?
7215.90.00.90 sits in this hierarchy: 72 IRON AND STEEL > 7215 Other bars and rods of iron or non-alloy steel > 721590 Other > 72159000 anderer. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7215.90.00.90?
Yes. The EBTI database holds decisions on 7215.90.00.90, for example EEBTI2026-18. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7215.90.00.90 covered by CBAM?
Yes. 7215.90.00.90 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7215.90.00.90?
Yes. Trade defence measures are in force on 7215.90.00.90, covering origin Countries subject to safeguard measures, ERGA OMNES. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7215.90.00.90 change?
7215.90.00.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.