Customs tariff code 7216.91.10: Profiled (ribbed) sheets
Reference data as at 1 July 2026
Customs tariff code 7216.91.10 covers Profiled (ribbed) sheets. The third-country duty rate is 0 %, plus import VAT.
7216.91.10 is CN code in the EU customs tariff, in chapter 72. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7216.91.10
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 7216.91.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| Korea, Republic of (South Korea) | 0 % | Tariff preference |
| Kenya | 0 % | Tariff preference |
| Ivory Coast | 0 % | Tariff preference |
| Preferential origin in accordance with the Agreement in the… | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Arkusze blach trapezowych wykonane ze stali niestopowej w procesie profilowania na zimno płaskiej blachy zwiniętej w kręgi. Arkusze obustronnie powleczone powłokami metalicznymi (cynk, cynk-magnez, cynk-aluminium), oraz wierzchnią powłoką organiczną – tworzywem sztucznym. Arkusze o grubości od 0,5 mm do 1,5 mm, szerokości od 1 m do 1,2 m oraz długości do 14 m. Przekrój poprzeczny każdego wyrobu jest pełny i jednolity, jest regularną linią łamaną tworzącą układ trapezów. Stosowane w budownictwie przemysłowym i mieszkalnym np. jako pokrycia dachowe oraz elewacyjne. W celu transportu, wyroby układane są na paletach, owijane folią i spinane paskami.
Arkusze blach trapezowych wykonane ze stali niestopowej w procesie profilowania na zimno płaskiej blachy zwiniętej w kręgi. Arkusze obustronnie pokryte tzw. alucynkiem lub cynkiem. W przypadku powłoki alucynk - wyrób jest dodatkowo pokryty ochronną powłoką polimerową. Arkusze o grubości od 0,5 mm do 1,5 mm, szerokości od 1 m do 1,2 m oraz długości do 14 m. Przekrój poprzeczny każdego wyrobu jest pełny i jednolity, jest regularną linią łamaną tworzącą układ trapezów. Stosowane w budownictwie przemysłowym i mieszkalnym np. jako pokrycia dachowe oraz elewacyjne. W celu transportu, wyroby układane są na paletach, owijane folią stretch i spinane paskami.
Conform descrierii solicitantului si a fotografiei publicate în baza de date, produsul reprezintă tabla cutată, realizată din otel nealiat. Foaia de tablă poate fi acoperită cu Zn (100mg/m2), Al+Zn (70mg/m2) sau prevopsită. Aceasta este profilată la rece si este utilizată în constructii. Are dimensiunile: lătime 910 mm, lungime 1500 – 6000 mm, grosime 0,15 – 0,8 mm.
Dle deklarovaných údajů se jedná o trapézové (žebrované) pozinkované plechy (profily) ze železa. Jsou tvarovány za studena z plochých válcovaných výrobků na ohýbacích strojích. Účel použití: pro výrobu kontejnerů, kde tvoří vnější stěnu Rozměry: 1200 x 2293 mm, tloušťka 1,5 mm.
Dle deklarovaných údajů se jedná o trapézové (žebrované) plechy ze železa. Jsou určeny k výrobě kontejnerů, kde tvoří vnější stěnu. Plechy jsou tvarovány za studena z plochých válcovaných výrobků na ohýbacích strojích. Rozměry: 1200 x 2293 mm, tloušťka 1,5 mm.
Conform descrierii solicitantului si a fotografiei publicate în baza de date, produsul reprezintă tabla cutată, realizată din otel nealiat. Foaia de tablă poate fi acoperită cu Zn (100mg/m2), Al+Zn (70mg/m2) sau prevopsită. Aceasta este profilată la rece si este utilizată în constructii. Are dimensiunile: lătime 910 mm, lungime 1500 – 6000 mm, grosime 0,15 – 0,8 mm.
Dle deklarovaných údajů se jedná o trapézové (žebrované) plechy ze železa. Plechy jsou tvarovány za studena z plochých válcovaných výrobků na ohýbacích strojích. Plechy jsou určeny k výrobě kontejnerů, kde tvoří vnější stěnu. Rozměry: 1200 x 2293 mm, tloušťka 1,5 mm.
Tôle nervurée obtenue ou parachevée à froid à partir de produits laminés plats. L'article sera utilisé pour la couverture de constructions (maisons individuelles, habitation collectives). Matière: acier non allié.
Notes that govern this classification
Zu Unterpositionen 7216 9110 und 7216 9180: Die Erläuterungen zu Unterposition 7215 9000 gelten sinngemäß. Zu Unterposition 7216 9110: Profilierte Bleche werden vorwiegend als Fassadenverkleidung verwendet. Sie haben beispielhaft folgende Form: Nicht hierher gehören profilierte Bleche mit Befestigungsvorrichtungen (Unterposition 7308 9059).
1. Im Sinne des Kapitels 72 - und in Bezug auf die Buchstaben d), e) und f) in der Nomenklatur insgesamt - gelten als: a) Roheisen Eisen-Kohlenstoff-Legierungen, die gewöhnlich nicht plastisch verformbar sind, mit einem Kohlenstoffgehalt von mehr als 2 GHT und die eines oder mehrere andere Elemente mit folgenden Anteilen enthalten können: - 10 GHT oder weniger Chrom, - 6 GHT oder weniger Mangan, - 3 GHT oder weniger Phosphor, - 8 GHT oder weniger Silicium, - 10 GHT oder weniger andere Elemente insgesamt (RV E7201A00). b) Spiegeleisen Eisen-Kohlenstoff-Legierungen, die mehr als 6 bis 30 GHT Mangan enthalten und die im Übrigen der Begriffsbestimmung der Anmerkung 1 a) entsprechen (RV E7201B00). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7216.91.10 cover?
Code 7216.91.10 covers Profiled (ribbed) sheets. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7216.91.10?
The third-country duty rate for 7216.91.10 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7216.91.10?
The first six digits form the HS code: 721691. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7216.91.10 have?
7216.91.10 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7216.91.10 sit in the tariff?
7216.91.10 sits in this hierarchy: 72 IRON AND STEEL > 7216 Angles, shapes and sections of iron or non-alloy steel > 721691 Cold-formed or cold-finished from flat-rolled products. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7216.91.10?
Yes. The EBTI database holds decisions on 7216.91.10, for example PLBTIWIT-2025-000427. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7216.91.10 covered by CBAM?
Yes. 7216.91.10 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Does customs tariff code 7216.91.10 change?
7216.91.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.