Customs tariff code 7217.20.30: With a maximum cross-sectional dimension of 0,8 mm or more
Reference data as at 12 August 2026
Customs tariff code 7217.20.30 covers With a maximum cross-sectional dimension of 0,8 mm or more. The third-country duty rate is 0 %, plus import VAT.
7217.20.30 is CN code in the EU customs tariff, in chapter 72. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7217.20.30
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 7217.20.30
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| European Union | 0 % | Non preferential tariff quota |
| Türkiye | 0 % | Non preferential tariff quota |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| Korea, Republic of (South Korea) | 0 % | Tariff preference |
| Kenya | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| Albania | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Alambre de acero sin alear de bajo carbono trefilado y galvanizado con un contenido de carbono superior a 0.06% e inferior a 0.25% en peso. Estos alambres se presentan en bobinas y pueden tener un diámetro/corte transversal de entre 2.00 mm y 5.00 mm. Recubrimiento de zinc 50-60 micras. El producto se presenta en bobinas de 1.000 kilos flejadas y con anillas. Función o uso: Según declaración del solicitante este artículo se destina a la fabricación de paneles, viticultura, automoción, entre otros.
Drahtband aus nicht legiertem Stahl Bei der Ware handelt es sich um ein Drahtband, bestehend aus beispielsweise 24 bis 210 (abhängig vom Kundenwunsch) parallel liegenden, kaltgezogenen Stahldrähten mit einem Durchmesser von 0,8 mm. Bei dem Material handelt es sich um einen unlegierten Stahl mit einem Kohlenstoffgehalt von weniger als 0,25 GHT mit verzinkter Oberfläche. Zusätzlich sind die Drähte mit einem Heißkleber parallel miteinander verklebt. Das Drahtband wird in Rollen gehandelt und zur Herstellung von beispielsweise Heftklammern verwendet. Die Ware ist aufgrund ihrer stofflichen Beschaffenheit als Draht aus nicht legiertem Stahl, verzinkt, mit einem Kohlenstoffgehalt von weniger als 0,25 GHT, mit einer größten Querschnittsabmessung von 0,8 mm oder mehr, in die Unterposition 7217 2030 der Kombinierten Nomenklatur einzureihen.
Fil en acier non allié, recouvert d’une couche de zinc. Le diamètre est de 1,55 à 7,30 mm et la teneur en carbone est de 0,12 % maximum. Il sera utilisé dans la fabrication de panneaux de clôture rigide.
Conform descrierii solicitantului și a fotografiei publicate în baza de date, produsul reprezintă sârmă din oțel, acoperită cu PVC. Este utilizată pentru fixarea plasei de gard de stâlpi și pentru întinderea acesteia. Stratul de PVC îi conferă o protecție sporită împotriva intemperiilor, precum și un aspect comercial mai plăcut. Sârma are grosimea de 2.6 mm si lungimea de 100 m și este fabricată prin trefilare din oțel nealiat, galvanizat, cu un conținut de carbon de 0,05%. Sârma are lungimea de 100m și este prezentată în rolă cu spire aranjate. Este ambalată în cutii de carton (20 role/ cutie).
Fil de fer en acier non allié zingué et à coupe rapide, revêtu de plastique (vert, blanc, gris). Le pourcentage en poids de carbone est inférieur à 0,25 % et la dimension de la coupe transversale est supérieure à 0,8 mm.
Fil de fer en acier non allié zingué et à coupe rapide. Le pourcentage en poids de carbone est inférieur à 0,25 % et la dimension de la coupe transversale est supérieure à 0,8 mm.
Binddraad met –volgens opgave- onder andere de volgende kenmerken en eigenschappen: - voor gebruik in een tuin; - van niet-gelegeerd staal; - gegalvaniseerd (verzinkt); - bevattende minder dan 0,25 gewichtspercenten koolstof; - door koud walsen verkregen - een lengte van 50 meter en een doorsnede van 0,8 mm. Wordt opgerold aangeboden in een kleinhandels verpakking van kunststof met een snijdrukelement van onedel metaal.
Umhüllter Stahldraht Bei der Ware handelt es sich um ein gezogenes, metallisches, mit grünem, geschäumten Kunststoff umhülltes Erzeugnis, mit über die gesamte Länge von 10 m gleichbleibendem, kreisförmigen Querschnitt (Draht). Dabei beträgt der äußere Durchmesser mit Ummantelung ca. 10 mm. Bei dem metallischen Material handelt es sich um nicht legierten Stahl mit einem Kohlenstoffgehalt von weniger als 0,25 GHT. Oberflächlich ist der Draht zusätzlich verzinkt und sein Durchmesser beträgt ca. 0,8 mm ohne die Ummantelung (Umhüllung) aus Kunststoff. Die Ware ist als Rolle aufgewickelt und für den Einzelverkauf aufgemacht. Die Ware ist nach ihrer Beschaffenheit als verzinkter Draht, aus nicht legiertem Stahl, mit einem Kohlenstoffgehalt von weniger als 0,25 GHT und einer größten Querschnittsabmessung von 0,8 mm oder mehr, in die Unterposition 7217 2030 der Kombinierten Nomenklatur einzureihen.
Notes that govern this classification
Zu Unterpositionen der Position 7217: Hinsichtlich der Erzeugnisse, die mehrfach aufeinanderfolgend unterschiedlich überzogen oder plattiert wurden, siehe die Erläuterungen zu den Unterpositionen der Position 7210.
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 258. Sitzung des Aus-schusses für den Zollkodex vom 24. bis 26. Juni 2024: Warenbeschreibung: Bei dem Erzeugnis handelt sich um 100 m lange, kunststoffummantelte Drähte (Querschnittsabmessung: weniger als 16 mm aus Stahl (kein nicht rostender Stahl), die aufgewickelt in einer etikettierten Kunststoffbox untergebracht sind. Die Box ist mit einer messerartigen Drahtschneidevorrichtung aus Aluminiumblech ausgestattet. Das Erzeugnis wird als Binde- oder Rankdraht für Pflanzen verwendet. …
1. Im Sinne des Kapitels 72 - und in Bezug auf die Buchstaben d), e) und f) in der Nomenklatur insgesamt - gelten als: a) Roheisen Eisen-Kohlenstoff-Legierungen, die gewöhnlich nicht plastisch verformbar sind, mit einem Kohlenstoffgehalt von mehr als 2 GHT und die eines oder mehrere andere Elemente mit folgenden Anteilen enthalten können: - 10 GHT oder weniger Chrom, - 6 GHT oder weniger Mangan, - 3 GHT oder weniger Phosphor, - 8 GHT oder weniger Silicium, - 10 GHT oder weniger andere Elemente insgesamt (RV E7201A00). b) Spiegeleisen Eisen-Kohlenstoff-Legierungen, die mehr als 6 bis 30 GHT Mangan enthalten und die im Übrigen der Begriffsbestimmung der Anmerkung 1 a) entsprechen (RV E7201B00). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7217.20.30 cover?
Code 7217.20.30 covers With a maximum cross-sectional dimension of 0,8 mm or more. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7217.20.30?
The third-country duty rate for 7217.20.30 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7217.20.30?
The first six digits form the HS code: 721720. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7217.20.30 have?
7217.20.30 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7217.20.30 sit in the tariff?
7217.20.30 sits in this hierarchy: 72 IRON AND STEEL > 7217 Wire of iron or non-alloy steel > 721720 Plated or coated with zinc. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7217.20.30?
Yes. The EBTI database holds decisions on 7217.20.30, for example ESBTIESBTI2025SOL1124. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7217.20.30 covered by CBAM?
Yes. 7217.20.30 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7217.20.30?
Yes. Trade defence measures are in force on 7217.20.30, covering origin Countries subject to safeguard measures, Albania, ERGA OMNES. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7217.20.30 change?
7217.20.30 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.