Customs tariff code 7225.99.00.25: Other
Reference data as at 1 July 2026
Customs tariff code 7225.99.00.25 covers Other. The third-country duty rate is 0 %, plus import VAT.
7225.99.00.25 is TARIC code in the EU customs tariff, in chapter 72. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7225.99.00.25
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
- 72IRON AND STEEL
- 7225Flat-rolled products of other alloy steel, of a width of 600 mm or more
- 7225.99Other
- 7225.99.00andere, andere
- 7225.99.00.25Other
From HS code to customs tariff code 7225.99.00.25
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| Korea, Republic of (South Korea) | 0 % | Tariff preference |
| Kenya | 0 % | Tariff preference |
| Ivory Coast | 0 % | Tariff preference |
| Preferential origin in accordance with the Agreement in the… | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C003Magnetic metals, of all types and of whatever form, having any of the following:
- 1C116Maraging steels, useable in 'missiles', having all of the following:
- 1C216Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1950 MPa or more, at 293 K (20 °C).
- 0013Weapons / munitions / military material (Ausfuhrliste Teil I A)
- 1A005Body armour and components therefor, as follows:
- 1C003Magnetic metals, of all types and of whatever form, having any of the following:
- 1C116Maraging steels, useable in 'missiles', having all of the following:
- 1C216Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1950 MPa or more, at 293 K (20 °C).
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Wyroby walcowane na gorąco, płaskie (blachy / płyty), wykonane ze stali stopowej (innej niż stal nierdzewna), o pełnych prostokątnych przekrojach poprzecznych, o szerokości od 600 mm włącznie do 2400 mm, o grubości powyżej 5 mm do 500 mm, o długości od 2500 mm do 6000 mm. Wymiary arkuszy zawsze zachowują warunek, że ich szerokość jest co najmniej równa podwojonej grubości. Wyroby w postaci płaskich arkuszy (płyt), o obydwu równych, gładkich powierzchniach. Proces produkcji wyrobu obejmuje: walcowanie kęsiska lub wlewka na gorąco, opcjonalnie obróbkę cieplną, cięcie na arkusze, piaskowanie / śrutowanie w celu wyrównania powierzchni i usunięcia zgorzeliny, malowanie / lakierowanie farbą bogatą w cynk (wagowo 70% lub więcej cynku) o barwie szarej. Stal nie jest uspokojona aluminium oraz nie zastosowano pasywacji chemicznej wyrobów.
En valsad platt produkt i form av en metallöverdragen plåt av legerat stål där plätteringen består av kromkarbid (CCO). Produkten består av ett eller flera skikt av kromkarbid svetsade på en basplåt av legerat stål med hjälp av bågsvetsning. Plåten är bearbetad vidare genom valsning, rostskyddsmålad och märkt innan leverans. Enligt uppgift har varan en bredd av minst 600 mm och basplåtens vikt är större än påsvetsmaterialets vikt. Produkten är avsedd för användning inom industriapplikationer med krävande slitageförhållanden som nötning, slag, värme, metall mot metall och erosion.
Blacha ze stali stopowej (innej niż nierdzewna), w postaci prostokątnych płaskich arkuszy o szerokości od 600 mm do 2000 mm, długości od 1000 mm do 6000 mm, grubości od 1 mm do 5 mm. Arkusze mają obustronnie gładką powierzchnię oraz pełny prostokątny przekrój poprzeczny. Wyrób uzyskany w wyniku następujących po sobie procesów: walcowanie na gorąco ; walcowanie na zimno ; zwinięcie w krąg ; opcjonalnie wyżarzenie (normalizujące, zmiękczające), opcjonalnie (hartowanie, odpuszczanie) ; prostowanie ; cięcie na prostokątne arkusze ; piaskowanie ; polerowanie ; olejowanie powierzchni w celu ochrony przed korozją.
Notes that govern this classification
1. Im Sinne des Kapitels 72 - und in Bezug auf die Buchstaben d), e) und f) in der Nomenklatur insgesamt - gelten als: a) Roheisen Eisen-Kohlenstoff-Legierungen, die gewöhnlich nicht plastisch verformbar sind, mit einem Kohlenstoffgehalt von mehr als 2 GHT und die eines oder mehrere andere Elemente mit folgenden Anteilen enthalten können: - 10 GHT oder weniger Chrom, - 6 GHT oder weniger Mangan, - 3 GHT oder weniger Phosphor, - 8 GHT oder weniger Silicium, - 10 GHT oder weniger andere Elemente insgesamt (RV E7201A00). b) Spiegeleisen Eisen-Kohlenstoff-Legierungen, die mehr als 6 bis 30 GHT Mangan enthalten und die im Übrigen der Begriffsbestimmung der Anmerkung 1 a) entsprechen (RV E7201B00). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7225.99.00.25 cover?
Code 7225.99.00.25 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7225.99.00.25?
The third-country duty rate for 7225.99.00.25 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7225.99.00.25?
The first six digits form the HS code: 722599. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7225.99.00.25 have?
7225.99.00.25 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7225.99.00.25 sit in the tariff?
7225.99.00.25 sits in this hierarchy: 72 IRON AND STEEL > 7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more > 722599 Other > 72259900 andere, andere. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7225.99.00.25?
Yes. The EBTI database holds decisions on 7225.99.00.25, for example PLBTIWIT-2023-001685. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7225.99.00.25 covered by CBAM?
Yes. 7225.99.00.25 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7225.99.00.25?
Yes. Trade defence measures are in force on 7225.99.00.25, covering origin Countries subject to safeguard measures, ERGA OMNES. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Is 7225.99.00.25 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7225.99.00.25 to 1C003, 1C116, 1C216, 0013, 1A005, 1C003, 1C116, 1C216. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7225.99.00.25 change?
7225.99.00.25 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.