Customs tariff code 7226.92.00.90: Of a width not exceeding 500 mm
Reference data as at 1 July 2026
Customs tariff code 7226.92.00.90 covers Of a width not exceeding 500 mm. The third-country duty rate is 0 %, plus import VAT.
7226.92.00.90 is TARIC code in the EU customs tariff, in chapter 72. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7226.92.00.90
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 6
Where this code sits in the tariff
- 72IRON AND STEEL
- 7226Flat-rolled products of other alloy steel, of a width of less than 600 mm
- 7226.92Not further worked than cold-rolled (cold-reduced)
- 7226.92.00andere, nur kaltgewalzt
- 7226.92.00.90Of a width not exceeding 500 mm
From HS code to customs tariff code 7226.92.00.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| Korea, Republic of (South Korea) | 0 % | Tariff preference |
| Kenya | 0 % | Tariff preference |
| Ivory Coast | 0 % | Tariff preference |
| Preferential origin in accordance with the Agreement in the… | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1A005Body armour and components therefor, as follows:
- 1C116Maraging steels, useable in 'missiles', having all of the following:
- 1C216Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1950 MPa or more, at 293 K (20 °C).
- 1C116Maraging steels, useable in 'missiles', having all of the following:
- 1C216Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1950 MPa or more, at 293 K (20 °C).
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| Türkiye | - | All other companies | Decision 0142/96 | - |
| ERGA OMNES | - | All other companies | Regulation 1036/16 | - |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
| China | Cond: A cert: D-008 (01):19.700 % ; A (01):22.100 % | Angang Steel Company Limited, Anshan | Regulation 2068/22 | - |
| China | Cond: A cert: D-008 (01):19.700 % ; A (01):22.100 % | Tianjin Angang Tiantie Cold Rolled Sheets Co. Ltd., Tianjin | Regulation 2068/22 | - |
| Russian Federation | Cond: A cert: D-008 (01):18.700 % ; A (01):36.100 % | Magnitogorsk Iron & Steel Works OJSC, Magnitogorsk | Regulation 2068/22 | - |
| Russian Federation | Cond: A cert: D-008 (01):34.000 % ; A (01):36.100 % | PAO Severstal, Cherepovets | Regulation 2068/22 | - |
| China | Cond: A cert: D-008 (01):20.500 % ; A (01):22.100 % | Hesteel Co., Ltd Tangshan Branch, Tangshan | Regulation 2068/22 | - |
| China | Cond: A cert: D-008 (01):20.500 % ; A (01):22.100 % | Handan Iron & Steel Group Han-Bao Co., Ltd., Handan | Regulation 2068/22 | - |
Open investigations, where duties may later apply: Japan, Taiwan, India, Türkiye, Viet Nam
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Stahlband Bei der Ware handelt es sich um einen Bandstahl aus einem anderem legierten Stahl mit der Werkstoffbezeichnung X2NiCoMo18-16-5 in Coils. Das Flacherzeugnis weist eine Dicke von 0,35 mm und eine Breite von 21 mm auf. Das Stahlband ist kaltgewalzt, vorgehärtet und gerichtet. Die Ware ist aufgrund ihrer Beschaffenheit als anderes flachgewalztes Erzeugnis aus anderem legierten Stahl, mit einer Breite von weniger als 500 mm, nur kaltgewalzt in den TARIC-Code 7226 9200 90 einzureihen.
BIMETAL STRIP WHICH CONSISTS OF TWO OR MORE METALLIC ALLOYS ROLLED TOGETHER TO FORM WHAT APPEARS TO BE A SINGLE METAL STRIP. THE METAL STRIP IS COLD ROLLED IN A WIDTH OF LESS THAN 500MM. IT IS MADE OF UP OF 64.5% IRON, 28.5% NICKEL AND 7% CHROMIUM.
ALLOY STEEL STRIP (NOT STAINLESS) WITH A WIDTH OF 7.938 MM. COLD ROLLED. NOT FURTHER WORKED, COATED, OR PLATED. USED FOR SLITTING KNIVES FOR INDUSTRIAL USE.
COLD ROLLED GLASS SEALING ALLOY STRIP.USED IN LEAD FRAME IN THE ELECTRONICS INDUSTRY. IT IS FLAT ROLLED PRODUCT OF OTHER ALLOY STEEL. IN COILS.WIDTH OF LESS THAN 600MM. NOT CLAD,PLATED OR COATED.NOT FURTHER WORKED THAN COLD ROLLED. CONTAINING BY WEIGHT LESS THAN 0.25 PERCENT OF CARBON.THICKNESS 0.1MM. WIDTH 35MM.
COLD ROLLED GLASS SEALING ALLOY STRIP.FLAT ROLLED PRODUCT OF OTHER ALLOY STEEL. IN COILS.WIDTH OF LESS THAN 600MM. NOT CLAD,PLATED OR COATED.NOT FURTHER WORKED THAN COLD ROLLED. CONTAINING BY WEIGHT LESS THAN 0.25 PERCENT OF CARBON.THICKNESS 0.1MM. WIDTH 35MM.
ALLOY STEEL MATERIAL IN ROLLS. THE MATERIAL IS 1.1 CM IN WIDTH AND APPROXIMATELY 0.1 MM IN THICKNESS. IT HAS THE FOLLOWING COMPOSITION 67% IRON, 13% CHROMIUM, 9% COBALT, 6% NICKEL, 5% OTHER.
Notes that govern this classification
Zu Unterposition 7226 92: Siehe die Erläuterungen zu den Unterpositionen 7209 15, 7209 16, 7209 17, 7209 18, 7209 25, 7209 26, 7209 27 und 7209 28. entfallen
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2020/693 DER KOMMISSION vom 15. Mai 2020 (ABL EU L 162/1) (RV L 20/693): Ein Band, aus legiertem Stahl (anderer als nicht rostender Stahl), mit einer Breite von etwa 30 mm und einer Dicke von etwa 0,02 mm, in Rollen. Die Ware hat einen über die gesamte Länge gleichbleibenden Querschnitt in Form eines Rechtecks. Ihre Oberfläche ist unbehandelt. Die Ware wird in einem als Schmelzspinn-Verfahren bezeichneten Stranggussverfahren hergestellt. Sie ist dazu bestimmt, in der Elektro-Industrie beispielsweise zur Herstellung von Transformatorkernen, Sensorkernen, Kernen für Sättigungsdrosseln, Magnetverstärker, Perlen und Pulskompressoren verwendet zu werden. …
1. Im Sinne des Kapitels 72 - und in Bezug auf die Buchstaben d), e) und f) in der Nomenklatur insgesamt - gelten als: a) Roheisen Eisen-Kohlenstoff-Legierungen, die gewöhnlich nicht plastisch verformbar sind, mit einem Kohlenstoffgehalt von mehr als 2 GHT und die eines oder mehrere andere Elemente mit folgenden Anteilen enthalten können: - 10 GHT oder weniger Chrom, - 6 GHT oder weniger Mangan, - 3 GHT oder weniger Phosphor, - 8 GHT oder weniger Silicium, - 10 GHT oder weniger andere Elemente insgesamt (RV E7201A00). b) Spiegeleisen Eisen-Kohlenstoff-Legierungen, die mehr als 6 bis 30 GHT Mangan enthalten und die im Übrigen der Begriffsbestimmung der Anmerkung 1 a) entsprechen (RV E7201B00). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7226.92.00.90 cover?
Code 7226.92.00.90 covers Of a width not exceeding 500 mm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7226.92.00.90?
The third-country duty rate for 7226.92.00.90 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7226.92.00.90?
The first six digits form the HS code: 722692. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7226.92.00.90 have?
7226.92.00.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7226.92.00.90 sit in the tariff?
7226.92.00.90 sits in this hierarchy: 72 IRON AND STEEL > 7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm > 722692 Not further worked than cold-rolled (cold-reduced) > 72269200 andere, nur kaltgewalzt. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7226.92.00.90?
Yes. The EBTI database holds decisions on 7226.92.00.90, for example DEBTI32017/19-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7226.92.00.90 covered by CBAM?
Yes. 7226.92.00.90 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7226.92.00.90?
Yes. Trade defence measures are in force on 7226.92.00.90, covering origin Countries subject to safeguard measures, Türkiye, ERGA OMNES, China, Russian Federation. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Is 7226.92.00.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7226.92.00.90 to 1A005, 1C116, 1C216, 1C116, 1C216. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7226.92.00.90 change?
7226.92.00.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.