Customs tariff code 7228.50.69.00.0: Less than 80 mm, anderer, mit kreisförmigem Querschnitt mit einem Durchmesser von…
Reference data as at 1 July 2026
Customs tariff code 7228.50.69.00.0 covers Less than 80 mm, anderer, mit kreisförmigem Querschnitt mit einem Durchmesser von, weniger als 80 mm. The third-country duty rate is 0 %, plus import VAT.
7228.50.69.00.0 is national commodity code in the EU customs tariff, in chapter 72. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7228.50.69.00.0
- Third-country duty
- 0 %
- Declarable
- Yes
- Binding rulings
- 1
Where this code sits in the tariff
- 72IRON AND STEEL
- 7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
- 7228.50Other bars and rods, not further worked than cold-formed or cold-finished
- 7228.50.69Less than 80 mm
- 7228.50.69.00.0Less than 80 mm, anderer, mit kreisförmigem Querschnitt mit einem Durchmesser von, weniger als 80 mm
From HS code to customs tariff code 7228.50.69.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| Korea, Republic of (South Korea) | 0 % | Tariff preference |
| Kenya | 0 % | Tariff preference |
| Ivory Coast | 0 % | Tariff preference |
| Preferential origin in accordance with the Agreement in the… | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C003Magnetic metals, of all types and of whatever form, having any of the following:
- 1C216Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1950 MPa or more, at 293 K (20 °C).
- 1C003Magnetic metals, of all types and of whatever form, having any of the following:
- 1C116Maraging steels, useable in 'missiles', having all of the following:
- 1C216Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1950 MPa or more, at 293 K (20 °C).
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Stahlstangen aus einer Legierung mit der Bezeichnung "4340". Bei der Ware handelt es sich um Stangen aus einer Stahllegierung mit der Bezeichnung "4340". Angaben zur Zusammensetzung: 0,38 - 0,43 % Kohlenstoff; 1,65 - 2 % Nickel; 0,4 - 0,6 % Chrom; 0,2 - 0,3 % Molybdän. Die Erzeugnisse werden lt. Angaben ausschließlich zur Herstellung von hochfesten Verbindungselementen für die Luft- und Raumfahrt eingesetzt. Als Warenmuster wurde ein Abschnitt eines dunkel-grauen, massiven, metallischen Materials, mit kreisförmigem, über die gesamte Länge gleich bleibendem Querschnitt vorgelegt (Länge: ca. 155 mm, Durchmesser: ca. 11 mm). Nach der Beschaffenheit der Oberfläche wurde die Ware kalthergestellt oder kaltfertiggestellt. Danach handelt es sich im Sinne des Zolltarifs um Stabstahl aus anderem legierten Stahl, anderer Stabstahl, nur kalthergestellt oder nur kaltfertiggestellt, anderer als Stabstahl der Unterpositionen 7228 5020 und 7228 5040, mit kreisförmigen Querschnitt und einem Durchmesser von weniger als 80 mm.
Notes that govern this classification
Zu Unterposition 7228 50: Siehe die Erläuterungen zu den Unterpositionen 7215 10 und 7215 50.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2020/693 DER KOMMISSION vom 15. Mai 2020 (ABL EU L 162/1) (RV L 20/693): Ein Band, aus legiertem Stahl (anderer als nicht rostender Stahl), mit einer Breite von etwa 30 mm und einer Dicke von etwa 0,02 mm, in Rollen. Die Ware hat einen über die gesamte Länge gleichbleibenden Querschnitt in Form eines Rechtecks. Ihre Oberfläche ist unbehandelt. Die Ware wird in einem als Schmelzspinn-Verfahren bezeichneten Stranggussverfahren hergestellt. Sie ist dazu bestimmt, in der Elektro-Industrie beispielsweise zur Herstellung von Transformatorkernen, Sensorkernen, Kernen für Sättigungsdrosseln, Magnetverstärker, Perlen und Pulskompressoren verwendet zu werden. …
1. Im Sinne des Kapitels 72 - und in Bezug auf die Buchstaben d), e) und f) in der Nomenklatur insgesamt - gelten als: a) Roheisen Eisen-Kohlenstoff-Legierungen, die gewöhnlich nicht plastisch verformbar sind, mit einem Kohlenstoffgehalt von mehr als 2 GHT und die eines oder mehrere andere Elemente mit folgenden Anteilen enthalten können: - 10 GHT oder weniger Chrom, - 6 GHT oder weniger Mangan, - 3 GHT oder weniger Phosphor, - 8 GHT oder weniger Silicium, - 10 GHT oder weniger andere Elemente insgesamt (RV E7201A00). b) Spiegeleisen Eisen-Kohlenstoff-Legierungen, die mehr als 6 bis 30 GHT Mangan enthalten und die im Übrigen der Begriffsbestimmung der Anmerkung 1 a) entsprechen (RV E7201B00). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Frequently asked questions
What does customs tariff code 7228.50.69.00.0 cover?
Code 7228.50.69.00.0 covers Less than 80 mm, anderer, mit kreisförmigem Querschnitt mit einem Durchmesser von, weniger als 80 mm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7228.50.69.00.0?
The third-country duty rate for 7228.50.69.00.0 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7228.50.69.00.0?
The first six digits form the HS code: 722850. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7228.50.69.00.0 have?
7228.50.69.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7228.50.69.00.0 sit in the tariff?
7228.50.69.00.0 sits in this hierarchy: 72 IRON AND STEEL > 7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel > 722850 Other bars and rods, not further worked than cold-formed or cold-finished > 72285069 Less than 80 mm. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7228.50.69.00.0?
Yes. The EBTI database holds decisions on 7228.50.69.00.0, for example DEK/966/07-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7228.50.69.00.0 covered by CBAM?
Yes. 7228.50.69.00.0 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7228.50.69.00.0?
Yes. Trade defence measures are in force on 7228.50.69.00.0, covering origin Countries subject to safeguard measures, ERGA OMNES. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Is 7228.50.69.00.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7228.50.69.00.0 to 1C003, 1C216, 1C003, 1C116, 1C216. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7228.50.69.00.0 change?
7228.50.69.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.