Customs tariff code 7304.31.80: Cold-drawn or cold-rolled (cold-reduced), andere
Reference data as at 24 August 2026
Customs tariff code 7304.31.80 covers Cold-drawn or cold-rolled (cold-reduced), andere. The third-country duty rate is 0 %, plus import VAT.
7304.31.80 is CN code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7304.31.80
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 7304.31.80
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| European Union | 0 % | Non preferential tariff quota |
| Ukraine | 0 % | Non preferential tariff quota |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| ERGA OMNES | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Se trata de tuberías de acero sin alear estirado sin soldadura, de sección circular. Estas manufacturas tienen forma de tubería y presentan derivaciones laterales (manguitos o bridas de conexión), que pueden ir soldadas o roscadas a la estructura principal. Los artículos se presentan en diversos diámetros, longitudes y espesores según el modelo. La pintura cuenta con una cabina de aplicación electrostática de pintura en polvo y polimerizado en horno. La pintura estándar es de resina POLIESTER, color rojo. Se hace constar que esta IAV cubre este artículo únicamente cuando se trate de tuberías de acero sin alear estirado sin soldadura. Las tuberías con soldadura no están amparadas por la presente IAV. Estos artículos siguen su propio régimen. Según declaración del solicitante su uso y función principal es: • Distribución de agua para extinción de incendios. • Mantenimiento de presión en el sistema. • Suministro de agua para mangueras manuales. • Protección de edificios e instalaciones industriales. • Prevención de propagación del fuego.
Tavara on saumaton kuumapursotuksella ja kylmävetämällä muokattu putki. Putkessa on ulkopuolella korroosiota kestävä pintakerros. Pintakerros ja putki on valmistusprosessissa sidottu toisiinsa metallurgisesti. Pintakerros vastaa pleterointia. Putken sisäpinta on raepuhallettu ja ulkopinta raepuhallettu ja/tai peitattu. Putken ulkohalkaisija on 63,5 mm ja seinämäpaksuus 6,53 mm. Putken pituus on 10 - 12 m. Putken ulkopinnan pinnoituksen paksuus on 1,65 mm.
Tavara on saumaton kuumapursotuksella ja kylmävetämällä muokattu putki. Putkessa on ulkopuolella korroosiota kestävä pintakerros. Pintakerros ja putki on valmistusprosessissa sidottu toisiinsa metallurgisesti. Pintakerros vastaa pleterointia. Putken sisäpinta on raepuhallettu ja ulkopinta raepuhallettu ja/tai peitattu. Putken ulkohalkaisija on 63,5 mm ja seinämäpaksuus 6,53 mm. Putken pituus on 10 – 11,5 m. Putken ulkopinnan pinnoituksen paksuus on 1,82 mm.
Tube creux sans soudure en acier étiré à froid. Le tube est destiné à des gicleurs et des électrovannes. Il est de section circulaire et parfois cintré. Il sert à projeter de l’huile sur le bas de la culasse du bloc moteur. Sa longueur excède deux fois la plus grande dimension extérieure de la coupe transversale.
Stahlrohr Bei der Ware handelt es sich um Stahlrohre mit kreisförmigem Querschnitt. Die Rohre sind 5800 mm bis 6000 mm lang. Der Außendurchmesser und die Wanddicke betragen 162,0 mm x 6,0 mm oder 162,4 mm x 5,0 mm. Die Ware ist nahtlos und kaltgezogen aus nicht legiertem Stahl ( Werstoff E195, E235 oder E355) gefertigt worden. Die Rohre werden nach Zuschnitt auf verschiedene Längen als Aufwickelhülsen für Alu-Folie und Aluminium-Coils verwendet, wobei die Länge die größte äußere Querschnittsabmessung mehr als zweimal überschreitet (Rohr). Die Waren sind nach ihrer stofflichen Beschaffenheit als nahtlose Rohre, mit kreisförmigem Querschnitt, aus nicht legiertem Stahl, kaltgezogen, andere, in die Unterposition 7304 3180 der Kombinierten Nomenklatur einzureihen.
Tavara on saumaton kuumapursotuksella ja kylmävetämällä muokattu putki. Putkessa on ulkopuolella korroosiota kestävä pintakerros. Pintakerros ja putki on valmistusprosessissa sidottu toisiinsa metallurgisesti. Pintakerros vastaa pleterointia. Putken sisäpinta on raepuhallettu ja ulkopinta raepuhallettu ja/tai peitattu. Putken ulkohalkaisija on 76,2 mm ja seinämäpaksuus 7,7 mm. Putken pituus on 9 – 10,5 m. Putken ulkopinnan pinnoituksen paksuus on 1,65 mm.
Tavara on saumaton kuumapursotuksella ja kylmävetämällä muokattu putki. Putkessa on ulkopuolella korroosiota kestävä pintakerros. Pintakerros ja putki on valmistusprosessissa sidottu toisiinsa metallurgisesti. Pintakerros vastaa pleterointia. Putken sisäpinta on raepuhallettu ja ulkopinta raepuhallettu ja/tai peitattu. Putken ulkohalkaisija on 63,5 mm ja seinämäpaksuus 6,53 mm. Putken pituus on 10 – 11,5 m. Putken ulkopinnan pinnoituksen paksuus on 1,82 mm.
Pieza tubular de acero. Se trata de una parte (casquillo interior) del soporte metálico que se utiliza como componente de los sistemas de suspensión en la automoción. Material: Q345; GB/T 1591: grado de acero 16Mn, acero estructural de baja aleación. Procedimiento de obtención: Forja en frio acabado en mecanizado chaflán. Medidas: 59,85 x 18 mm (altura x diámetro). Peso: 68 gr.
Notes that govern this classification
Zu Unterpositionen 7304 31, 7304 39, 7304 41, 7304 49, 7304 51 und 7304 59: Wegen der Unterscheidbarkeit von kalthergestellten Erzeugnissen von anderen in diesen Unterpositionen erfassten Produkten wird auf die Erläuterungen zu Kapitel 72 Abschnitt „Allgemeines“ Teil IV B) zweiter Absatz verwiesen.
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des BFH VII R 9/15 vom 8.11.2016 Vorinstanz: FG Hamburg, 18. Juli 2014, 4 K 183/12: Zolltarif: Einreihung langer "Dehnhülsen" in die Kombinierte Nomenklatur Leitsatz 1. Rohre sind Unterlegscheiben nicht ähnlich, auch wenn sie z.B. im Windanlagenbau als "Dehnhülsen" in einer Schraubverbindung verwendet werden sollen (Rn.1). 2. Der Verwendungszweck einer Ware kann ein objektives Einreihungskriterium sein, sofern er sich aus der Natur des Erzeugnisses ergibt bzw. der Ware innewohnt und wenn im Wortlaut der Bestimmungen oder in den Erläuterungen auf den Verwendungszweck Bezug genommen wird (Rn.10) (Rn.11). Entscheidungsgründe […] 14. 2. Im Streitfall hat das FG festgestellt, die Waren würden vom Wortlaut der Pos. 7304 KN "Rohre und Hohlprofile, nahtlos, aus Eisen (ausgenommen Gusseisen) oder Stahl" erfasst. …
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7304.31.80 cover?
Code 7304.31.80 covers Cold-drawn or cold-rolled (cold-reduced), andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7304.31.80?
The third-country duty rate for 7304.31.80 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7304.31.80?
The first six digits form the HS code: 730431. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7304.31.80 have?
7304.31.80 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7304.31.80 sit in the tariff?
7304.31.80 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7304 Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel > 730431 Cold-drawn or cold-rolled (cold-reduced). The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7304.31.80?
Yes. The EBTI database holds decisions on 7304.31.80, for example ESBTIESBTI2025SOL1212. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7304.31.80 covered by CBAM?
Yes. 7304.31.80 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7304.31.80?
Yes. Trade defence measures are in force on 7304.31.80, covering origin ERGA OMNES. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7304.31.80 change?
7304.31.80 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.