Customs tariff code 7306.30.72.80.0: Tubes and pipes, andere, Rohre aus Eisen oder nicht legiertem Stahl
Reference data as at 1 July 2026
Customs tariff code 7306.30.72.80.0 covers Tubes and pipes, andere, Rohre aus Eisen oder nicht legiertem Stahl. The third-country duty rate is 0 %, plus import VAT.
7306.30.72.80.0 is national commodity code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7306.30.72.80.0
- Third-country duty
- 0 %
- Declarable
- Yes
- Binding rulings
- 1
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7306Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
- 7306.30Other, welded, of circular cross-section, of iron or non-alloy steel
- 7306.30.72Plated or coated with zinc
- 7306.30.72.80Tubes and pipes
- 7306.30.72.80.0Tubes and pipes, andere, Rohre aus Eisen oder nicht legiertem Stahl
From HS code to customs tariff code 7306.30.72.80.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C216Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1950 MPa or more, at 293 K (20 °C).
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| Belarus | 38.1 % | All other companies | Regulation 0635/21 | - |
| China | 90.6 % | All other companies | Regulation 0635/21 | - |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
| Russian Federation | 16.8 % | TMK Group (Seversky Pipe Plant Open Joint Stock Company and Joint Stock Company Taganrog Metallurgical Works) | Regulation 0635/21 | - |
| Russian Federation | 10.1 % | OMK Group (Open Joint Stock Company Vyksa Steel Works and Joint Stock Company Almetjvesk Pipe Plant) | Regulation 0635/21 | - |
| Russian Federation | 20.5 % | Other | Regulation 0635/21 | - |
Open investigations, where duties may later apply: Russian Federation, Belarus, China
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Anderes Rohr aus Stahl Bei der Ware handelt es sich um ein Hohlerzeugnis aus nicht legiertem Stahl (Automatenstahl) mit kreisförmigem Querschnitt (Rohr) mit verzinkter Oberfläche und innen erkennbarer Schweißnaht. Die Länge beträgt ca. 133 mm und der Außendurchmesser beträgt ca. 42 mm. An einem Enden ist das Rohr auf ca. 53 mm aufgeweitet. Es dient als Knickschutz für einen Schlauch hinter einer Fassung. Die Ware ist als anderes geschweißtes und verzinktes Rohr aus nicht legiertem Stahl, mit kreisförmigem Querschnitt und einem äußeren Durchmesser von 168,3 mm oder weniger in den TARIC-Code 7306 3072 80 einzureihen.
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 707/2013 Kommission vom 23. Juli 2013 ABl. EU Nr. L 200/8) (RV L 707/13) Geschweißte Rohre aus nicht legiertem Stahl mit kreisförmigem Querschnitt, mit einer Länge von 3 oder 6 m, einer Wanddicke von 2,6 bis 3,6 mm und einem äußeren Durchmesser von 33,7 bis 114,2 mm, mit Vertiefungen an beiden Enden. Sie sind zur Verwendung als Rohre für Sprinkleranlagen bestimmt. Siehe Abbildung. Unterposition 7306 30 77 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7306, 7306 30 und 7306 30 77. Angesichts der objektiven Merkmale und Eigenschaften erfüllt die Ware die Kriterien der Position 7306. …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Beschluss des Europäischen Gerichtshofs (Sechste Kammer) vom 27. Februar 2020 in der Rechtssache C-670/19 Tenor Die Kombinierte Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in der durch die Verordnung (EU) Nr. 861/2010 der Kommission vom 5. Oktober 2010 geänderten Fassung ist dahin auszulegen, dass Gardinenstangen aus unedlen Metallen von der zolltariflichen Unterposition 8302 41 90 erfasst werden, sofern es sich nicht um Profile, Rohre oder Stäbe handelt, die nur auf die gewünschte Länge geschnitten wurden, und dass es Sache des vorlegenden Gerichts ist, dies zu prüfen, um die im Ausgangsverfahren in Rede stehenden Waren anhand der vom Gerichtshof in Beantwortung der ersten Vorlagefrage erteilten Hinweise selb …
Nationale Entscheidungen und Hinweise (NEH) Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (11. Sitzung des Ausschusses für den Zollkodex vom 1. bis 3. Juli 2009): Geschweißte Rohre und Hohlprofile (z. B. geschweißt, genietet, gefalzt oder mit einfach aneinander gelegten Rändern), aus nicht rostendem Stahl der Position 7306, die nach international anerkannten Normen gehandelt werden, die eine Verwendung als Hochdruckleitung von 16 bar oder mehr beschreiben, sind als Rohre von der für Öl- oder Gasfernleitungen verwendeten Art (line pipe) in die Unterposition 7306 11 einzureihen. Diese Erzeugnisse entsprechen der Norm EN 10208-2 und den entsprechenden nationalen Normen. …
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
Frequently asked questions
What does customs tariff code 7306.30.72.80.0 cover?
Code 7306.30.72.80.0 covers Tubes and pipes, andere, Rohre aus Eisen oder nicht legiertem Stahl. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7306.30.72.80.0?
The third-country duty rate for 7306.30.72.80.0 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7306.30.72.80.0?
The first six digits form the HS code: 730630. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7306.30.72.80.0 have?
7306.30.72.80.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7306.30.72.80.0 sit in the tariff?
7306.30.72.80.0 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel > 730630 Other, welded, of circular cross-section, of iron or non-alloy steel > 73063072 Plated or coated with zinc > 7306307280 Tubes and pipes. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7306.30.72.80.0?
Yes. The EBTI database holds decisions on 7306.30.72.80.0, for example DE18593/12-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7306.30.72.80.0 covered by CBAM?
Yes. 7306.30.72.80.0 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7306.30.72.80.0?
Yes. Trade defence measures are in force on 7306.30.72.80.0, covering origin Countries subject to safeguard measures, Belarus, China, ERGA OMNES, Russian Federation. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Is 7306.30.72.80.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7306.30.72.80.0 to 1C216. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7306.30.72.80.0 change?
7306.30.72.80.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.