Customs tariff code 7307.11.90.00.0: Other, andere
Reference data as at 1 July 2026
Customs tariff code 7307.11.90.00.0 covers Other, andere. The third-country duty rate is 3.7 %, plus import VAT.
7307.11.90.00.0 is national commodity code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7307.11.90.00.0
- Third-country duty
- 3.7 %
- Declarable
- Yes
- Binding rulings
- 2
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7307Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
- 7307.11Of non-malleable cast iron
- 7307.11.90Other
- 7307.11.90.00.0Other, andere
From HS code to customs tariff code 7307.11.90.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3.7 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Rohrverbindungsstück aus Gusseisen; Schauglas Bei der Ware handelt es sich um ein T-förmiges Rohrverbindungsstück aus Gusseisen mit Lamellengraphit (FC250). An den Enden sind Anschlüsse über Gewinde vorgesehen. In der Mitte ist ein Schauglas aus gehärtetem Glas mit Hilfe eines Flansches befestigt. Das Schauglas ermöglicht die Beobachtung des Mediums im Durchfluss in Leitungssystemen. Es sind eine Schwimmerkugel und Dichtungen aus Kunststoff (PTFE) enthalten. Das Rohrverbindungssystem aus Gusseisen bestimmt den Charakter der aus verschiedenen Bestandteilen bestehenden Ware. Exemplarische Abbildung siehe Anlage. Eine Einreihung in die Position 9026 ist ausgeschlossen, da keine physikalischen Parameter gemessen oder geprüft werden. Die Ware wird nach ihrer Beschaffenheit als Rohrverbindungsstück, gegossen, aus nicht verformbarem Gusseisen, andere, in die Codenummer 7307 1190 00 0 des Zolltarifs eingereiht..
Rohrformstück Bei der Ware handelt es sich um ein rohrförmiges, im Winkel von 45 Grad gebogenes Hohlerzeugnis mit einer Nennweite von 100 mm. Laut Datenblatt besteht es aus aus Gusseisen mit der Werkstoffbezeichnung GJL-500 entsprechend EN 1561 (Gusseisen mit Lamellengrafit). Das Erzeugnis dient zum Verbinden von Rohren für die Entwässerung. Andere Abmessungen sind möglich, wobei die mittlere Rohrlänge den äußeren Durchmesser nicht um mehr als das Zweifache übersteigt. Zolltariflich handelt es sich um ein anderes gegossenes Rohrformstück aus nicht verformbarem Gusseisen.
Notes that govern this classification
Zu Unterpositionen 7307 11 10 und 7307 11 90: Der Begriff „nicht verformbares Gusseisen“ umfasst auch Gusseisen mit Lamellengrafit. Hierher gehören Rohrform-, Rohrverschluss- oder Rohrverbindungsstücke wie z. B. Bogen, Winkel, Flansche, T-Stücke. Sie werden mit den Guss- oder Stahlrohren entweder zusammengeschraubt oder durch Druckkontakte verbunden.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 647/2014 DER KOMMISSION vom 12. Juni 2014 (ABl. EU Nr. L 178/5) (RV L 647/14): Eine zylinderförmige hohle Ware aus Aluminium, die sich an einem Ende verjüngt (Nippel) und mit einem Hebelverschlussring ausgestattet ist. Die Ware stellt eine Schlauchkupplung dar. Unterposition 7609 00 00 Einreihung gemäß der Allgemeinen Vorschrift 1 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut des KN-Codes 7609 00 00. Position 7609 umfasst Waren, die dazu bestimmt sind, zwei Rohre oder Rohrstücke miteinander zu verbinden (siehe HS-Erläuterungen zu den Positionen 7609 und 7307). Da Schläuche als eine Art Rohr betrachtet werden, fallen Schlauchkupplungen ebenfalls in den Geltungsbereich dieser Position. …
Gerichtliche Entscheidungen (GE) - EuGH Urteil des EuGH vom 12. Dezember 2013 - C 450/12 Einreihung eines Ofenrohrsets Tenor Aus diesen Gründen hat der Gerichtshof (Zehnte Kammer) für Recht erkannt: Die Kombinierte Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in der Fassung der Verordnung (EG) Nr. 1031/2008 der Kommission vom 19. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (48. Sitzung des Ausschusses für den Zollkodex vom 24. bis 26. November 2010): Gegossene Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke der Unterposition 7307 11 bis 7307 19 verbleiben in diesen Unterpositionen solange sie den wesentlichen Charakter von Gussstücken (Charakter von Formstücken) aufweisen. Eine weitere Bearbeitung (z.B. durch Fräsen, Bohren, Lochen oder Drehen) ist zulässig. Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 183. Sitzung des Ausschusses für den Zollkodex vom 23. bis 26. …
Frequently asked questions
What does customs tariff code 7307.11.90.00.0 cover?
Code 7307.11.90.00.0 covers Other, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7307.11.90.00.0?
The third-country duty rate for 7307.11.90.00.0 is 3.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7307.11.90.00.0?
The first six digits form the HS code: 730711. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7307.11.90.00.0 have?
7307.11.90.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7307.11.90.00.0 sit in the tariff?
7307.11.90.00.0 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel > 730711 Of non-malleable cast iron > 73071190 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7307.11.90.00.0?
Yes. The EBTI database holds decisions on 7307.11.90.00.0, for example DEBTI12829/24-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7307.11.90.00.0 covered by CBAM?
Yes. 7307.11.90.00.0 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Does customs tariff code 7307.11.90.00.0 change?
7307.11.90.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.