Customs tariff code 7307.29.80.90: Other
Reference data as at 1 July 2026
Customs tariff code 7307.29.80.90 covers Other. The third-country duty rate is 3.7 %, plus import VAT.
7307.29.80.90 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7307.29.80.90
- Third-country duty
- 3.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7307Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
- 7307.29Other
- 7307.29.80Other
- 7307.29.80.90Other
From HS code to customs tariff code 7307.29.80.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3.7 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Tappo di chiusura. L’articolo consiste in un manicotto in acciaio inossidabile, non filettato, non del tipo da saldare, non ottenuto per fusione ma realizzato da pezzo intero (barra). L’impiego avviene per inserimento da accoppiamento in un tubo mediante tecnica a pressare, ovvero pressfitting. Diametro: da 15 mm a 28 mm.
Collier de serrage de type « clamp », destiné à être utilisé pour la réalisation d’un raccord étanche avec une ferrule et un joint d’étanchéité (non repris dans ce RTC). Il est constitué en acier inoxydable (type 304), et a été moulé et poli, ou forgé et poli (selon les modèles). Il est muni d’un dispositif de serrage fileté, et articulé. Son diamètre varie de 25 à 34 mm selon les modèles.
Manicotto non filettato realizzato, per dichiarazione di parte, in acciaio inox. L'articolo è destinato ad essere utilizzato per la circolazione dell’acqua nei refrigeratori. L'articolo è dotato di una serie di connessioni per le derivazioni di acqua ed è integrato in macchine refrigeratrici. Il manicotto può essere coibentato. Il manicotto è prodotto partendo dal tubo in acciaio inox.
Collettore non filettato realizzato, per dichiarazione di parte, in acciaio inox. L'articolo, a forma di T, serve per la circolazione dell’acqua nei refrigeratori. L'articolo può presentarsi anche coibentato, per evitare il riscaldamento dell’acqua che la formazione di condensa.
Manicotto non filettato realizzato, per dichiarazione di parte, in acciaio inox. L'articolo è destinato ad essere utilizzato per la circolazione dell’acqua nei refrigeratori. L'articolo è dotato di una serie di connessioni per le derivazioni di acqua in macchine refrigeratrici. Il manicotto può essere coibentato. Il manicotto è prodotto partendo dal tubo in acciaio inox. La prima fase è il taglio-misura e la predisposizione di fori.
Collettore in acciaio inox, non filettato. L'articolo è destinato ad essere utilizzato per la circolazione dell’acqua nei refrigeratori. L'articolo è dotato di una serie di connessioni per le derivazioni di acqua in posizioni precise dato che devono integrarsi nell’assieme delle macchine refrigeratrici. Il collettore può essere coibentato. Il collettore permette la circolazione dell’acqua all’interno dei refrigeratori. Il collettore è prodotto partendo dal tubo in acciaio inox. La prima fase è il taglio-misura predisponendo anche fori in posizioni ben precise. Successivamente al tubo gli vengono saldati curve/raccordi/riduzioni.
Se trata de artículo con forma tubular cilíndrica, con diferentes resaltes y anillos perimetrales integrados en el cuerpo, de acero inoxidable, sin rosca, con unas medidas aproximadas de 64 mm de largo por 13 mm en su parte más ancha. Incluye la superficie para junta tórica. Su función es actuar como manguito en la parte del conector de rebose de un módulo de suministros de sistema de dosificación de una solución automotriz para reducir emisiones nocivas de turismos y vehículos comerciales ligeros. El manguito se encarga de la dosificación precisa de esta solución automotriz.
Es handelt sich bei der Ware um ein ca. 40 mm langes, gestuftes Rohrformstück aus nicht rostendem Stahl. Die äußeren Durchmesser betragen ca. 29 mm und 34 mm. Das Formstück besitzt mittig einen radial vorspringenden, umlaufenden Bund mit einem Außendurchmesser von ca. 44 mm. Der Einfühlstutzen wird lt. Antragsteller mittels Kehlnaht an eine Tankschale geschweißt und verbindet den Tank mit dem Einfüllrohr. (siehe Abbildung)
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Diese Position umfasst eine Reihe von Waren aus Eisen oder Stahl, die im Wesentlichen dazu bestimmt sind, entweder zwei Rohre oder Rohrstücke miteinander zu verbinden, ein Rohr an eine andere Vorrichtung anzuschließen oder Rohröffnungen zu verschließen. Ausgenommen sind jedoch Waren, die zwar zur Montage von Rohren bestimmt sind, aber keinen unbedingt notwendigen Teil der Rohrleitung bilden (z. B. Hängebänder oder Stützen, die zum Befestigen oder Stützen von Rohren in Mauern eingelassen werden, Schlauchklemmen und -binder, mit denen Schläuche an starren Rohren, Hähnen, Rohrverbindungsstücken usw. befestigt werden (Pos. 7325 oder 7326). …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 647/2014 DER KOMMISSION vom 12. Juni 2014 (ABl. EU Nr. L 178/5) (RV L 647/14): Eine zylinderförmige hohle Ware aus Aluminium, die sich an einem Ende verjüngt (Nippel) und mit einem Hebelverschlussring ausgestattet ist. Die Ware stellt eine Schlauchkupplung dar. Unterposition 7609 00 00 Einreihung gemäß der Allgemeinen Vorschrift 1 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut des KN-Codes 7609 00 00. Position 7609 umfasst Waren, die dazu bestimmt sind, zwei Rohre oder Rohrstücke miteinander zu verbinden (siehe HS-Erläuterungen zu den Positionen 7609 und 7307). Da Schläuche als eine Art Rohr betrachtet werden, fallen Schlauchkupplungen ebenfalls in den Geltungsbereich dieser Position. …
Gerichtliche Entscheidungen (GE) - EuGH Urteil des EuGH vom 12. Dezember 2013 - C 450/12 Einreihung eines Ofenrohrsets Tenor Aus diesen Gründen hat der Gerichtshof (Zehnte Kammer) für Recht erkannt: Die Kombinierte Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in der Fassung der Verordnung (EG) Nr. 1031/2008 der Kommission vom 19. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (48. Sitzung des Ausschusses für den Zollkodex vom 24. bis 26. November 2010): Gegossene Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke der Unterposition 7307 11 bis 7307 19 verbleiben in diesen Unterpositionen solange sie den wesentlichen Charakter von Gussstücken (Charakter von Formstücken) aufweisen. Eine weitere Bearbeitung (z.B. durch Fräsen, Bohren, Lochen oder Drehen) ist zulässig. Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 183. Sitzung des Ausschusses für den Zollkodex vom 23. bis 26. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7307.29.80.90 cover?
Code 7307.29.80.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7307.29.80.90?
The third-country duty rate for 7307.29.80.90 is 3.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7307.29.80.90?
The first six digits form the HS code: 730729. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7307.29.80.90 have?
7307.29.80.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7307.29.80.90 sit in the tariff?
7307.29.80.90 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel > 730729 Other > 73072980 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7307.29.80.90?
Yes. The EBTI database holds decisions on 7307.29.80.90, for example ITBTI2025-0736. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7307.29.80.90 covered by CBAM?
Yes. 7307.29.80.90 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Does customs tariff code 7307.29.80.90 change?
7307.29.80.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.