Customs tariff code 7307.93.99.90: Other
Reference data as at 1 July 2026
Customs tariff code 7307.93.99.90 covers Other. The third-country duty rate is 3.7 %, plus import VAT.
7307.93.99.90 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7307.93.99.90
- Third-country duty
- 3.7 %
- Declarable
- No
- Binding rulings
- 6
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7307Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
- 7307.93Butt welding fittings
- 7307.93.99Other
- 7307.93.99.90Other
From HS code to customs tariff code 7307.93.99.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3.7 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Pribor (fiting) za cevi v obliki T-priključka iz navadnih kovin – ogljikovega jekla tipa ASTM A234 WPB z 0,18 mas. % ogljika, izdelan z varjenjem v skladu s standardom ISO 3419-1981. Največji zunanji premer izdelka znaša 914 mm z debelino stene 14,2 mm. Na sredini se nahaja tretji izhodni priključek z izhodnim premerom 610 mm, debelino stene 8,8 mm in višino odcepa 127 mm. Izdelek je namenjen za spajanje cevi ali drugega pribora z varjenjem pri izdelavi hladilnih sistemov za industrijsko vodo v železarski industriji.
Pribor (fiting) za cevi v obliki ekscentričnega redukcijskega priključka iz navadnih kovin – ogljikovega jekla tipa ASTM A234 WPB z 0,18 mas. % ogljika, izdelan z varjenjem v skladu s standardom ISO 3419-1981. Največji zunanji premer izdelka znaša 914 mm in reducirni del z premerom 508 mm. Višina izdelka je 610 mm. Debelina stene priključka je 14,2 mm. Izdelek je namenjen za spajanje cevi ali drugega pribora z varjenjem pri izdelavi hladilnih sistemov za industrijsko vodo v železarski industriji.
Rohrverbindungsstücke; Bauteile zum Stumpfschweißen Bei den Waren, bezeichnet als Übergangsstück und Hosenstück, handelt es sich um metallische Hohlkörper (Rohrverbindungsstücke) aus anderem als nicht rostendem Stahl, hier Carbonstahl entsprechend ASME SA 105. Die Erzeugnisse werden als Bauteil im Kraftwerksbau zum Anschluss von Rohrleitungen verwendet. Der Anschluss erfolgt durch Stumpfschweißen. Die äußeren Durchmesser betragen sämtlich mehr als 609,6 mm. Die Waren sind nach ihrer Beschaffenheit als andere Rohrverbindungsstücke zum Stumpfschweißen, mit einem größten äußeren Durchmesser von mehr als 609,6 mm, in den TARIC-Code 7307 9399 90 einzureihen.
Łączniki rur w postaci trójników oraz redukcji o największej średnicy zewnętrznej przekraczającej 609,6 mm, bez gwintu, wykonane ze stali niestopowej w gatunku S235, w procesie tłoczenia z rur, przeznaczone do spawania doczołowego. Wyroby są stosowane w rurociągach i instalacjach do przesyłu np. wody, pary wodnej.
Pribor (fiting) za cevi za soležno varjenje obliki brezšivnega T-priključka brez navoja iz ogljikovega jekla tipa ASTM A234 WPB. Izdelana je z varjenjem v skladu s standardom ISO 3419-1981 oziroma EN 10253-2:2008. Največji zunanji premer izdelka znaša 610 mm. Izdelek je namenjen za spajanje cevi ali drugega pribora z soležnim varjenjem pri izdelavi hladilnih sistemov za industrijsko vodo v železarski industriji.
Pribor (fiting) za cevi za soležno varjenje obliki ekscentričnega redukcijskega priključka brez navoja iz ogljikovega jekla tipa ASTM A234 WPB. Izdelan je z varjenjem v skladu s standardom ISO 3419-1981 oziroma EN 10253-2:2008. Največji zunanji premer izdelka znaša 610 mm. Izdelek je namenjen za spajanje cevi ali drugega pribora z soležnim varjenjem pri izdelavi hladilnih sistemov za industrijsko vodo v železarski industriji.
Notes that govern this classification
Zu Unterposition 7307 93 99: Siehe die Erläuterungen zu Unterposition 7307 23 90.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 647/2014 DER KOMMISSION vom 12. Juni 2014 (ABl. EU Nr. L 178/5) (RV L 647/14): Eine zylinderförmige hohle Ware aus Aluminium, die sich an einem Ende verjüngt (Nippel) und mit einem Hebelverschlussring ausgestattet ist. Die Ware stellt eine Schlauchkupplung dar. Unterposition 7609 00 00 Einreihung gemäß der Allgemeinen Vorschrift 1 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut des KN-Codes 7609 00 00. Position 7609 umfasst Waren, die dazu bestimmt sind, zwei Rohre oder Rohrstücke miteinander zu verbinden (siehe HS-Erläuterungen zu den Positionen 7609 und 7307). Da Schläuche als eine Art Rohr betrachtet werden, fallen Schlauchkupplungen ebenfalls in den Geltungsbereich dieser Position. …
Gerichtliche Entscheidungen (GE) - EuGH Urteil des EuGH vom 12. Dezember 2013 - C 450/12 Einreihung eines Ofenrohrsets Tenor Aus diesen Gründen hat der Gerichtshof (Zehnte Kammer) für Recht erkannt: Die Kombinierte Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in der Fassung der Verordnung (EG) Nr. 1031/2008 der Kommission vom 19. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (48. Sitzung des Ausschusses für den Zollkodex vom 24. bis 26. November 2010): Gegossene Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke der Unterposition 7307 11 bis 7307 19 verbleiben in diesen Unterpositionen solange sie den wesentlichen Charakter von Gussstücken (Charakter von Formstücken) aufweisen. Eine weitere Bearbeitung (z.B. durch Fräsen, Bohren, Lochen oder Drehen) ist zulässig. Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 183. Sitzung des Ausschusses für den Zollkodex vom 23. bis 26. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7307.93.99.90 cover?
Code 7307.93.99.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7307.93.99.90?
The third-country duty rate for 7307.93.99.90 is 3.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7307.93.99.90?
The first six digits form the HS code: 730793. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7307.93.99.90 have?
7307.93.99.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7307.93.99.90 sit in the tariff?
7307.93.99.90 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel > 730793 Butt welding fittings > 73079399 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7307.93.99.90?
Yes. The EBTI database holds decisions on 7307.93.99.90, for example SI2016/0024. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7307.93.99.90 covered by CBAM?
Yes. 7307.93.99.90 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Does customs tariff code 7307.93.99.90 change?
7307.93.99.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.