Customs tariff code 7308.30.00.00.0: Tore, Türen, Fenster, und deren Rahmen und Verkleidungen, Tor- und Türschwellen
Reference data as at 1 July 2026
Customs tariff code 7308.30.00.00.0 covers Tore, Türen, Fenster, und deren Rahmen und Verkleidungen, Tor- und Türschwellen. The third-country duty rate is 0 %, plus import VAT.
7308.30.00.00.0 is national commodity code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7308.30.00.00.0
- Third-country duty
- 0 %
- Declarable
- Yes
- Binding rulings
- 5
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7308Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
- 7308.30Doors, windows and their frames and thresholds for doors
- 7308.30.00.00.0Tore, Türen, Fenster, und deren Rahmen und Verkleidungen, Tor- und Türschwellen
From HS code to customs tariff code 7308.30.00.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 2B352aBiological manufacturing and handling equipment, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Gartentor: Es handelt sich um ein Gartentor in verschiedenen Längen (Breite 106 cm, Länge 130, 150, 175 und 200 cm) in der Aufmachung zum Einzelverkauf. Das Erzeugnis ist aus Stahl gefertigt, noch nicht zusammengesetzt und besteht i. W. aus einem sog. Tor, das mittels Scharnieren zwischen zwei Torpfosten mit quadratischem Querschnitt befestigt wird. Das Tor, in Form eines etwa rechteckigen Rahmens, das ein Drahtgitterelement einfasst, ist mit einer Türdrückergarnitur, einem Zylinderschloss mit Schlüssel sowie einer Schlossblende ausgestattet. Das Erzeugnis wird dauerhaft mit dem Boden verbunden und dient als Gartentor. - Antragstellerangaben - Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Konstruktionen aus Stahl (Türen)" zur Codenummer 7308 3000 00 0.
Es handelt sich um aus verschiedenen Bestandteilen zusammengesetzte Erzeugnisse, vollständig aus Stahl gefertigt, bestehend aus einem ca. 87 breiten und ca. 100 cm hohen gitterartigen Gartentor, das mittels Scharnieren an zwei ca. 150 cm langen Pfosten befestigt ist, einem Schloss mit drei Schlüsseln und einer Türklinke. Die Pfosten werden ortsfest im Erdreich verankert. Das Gartentor bestimmt den Charakter der zusammengesetzten Ware. -Antragstellerangaben- Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Konstruktionsteile (Tore) aus Stahl" zur Codenummer 7308 3000 00 0 des Zolltarifs.
Es handelt sich um aus verschiedenen Bestandteilen zusammengesetzte Erzeugnisse, vollständig aus Stahl gefertigt, bestehend aus einem ca. 314 breiten und ca. 100 cm hohen doppelflügeligen, gitterartigen Gartentor, dass mittels Scharnieren an zwei ca. 150 cm langen Pfosten befestigt ist, einem Schloss mit drei Schlüsseln und einer Türklinke.Die Pfosten werden ortsfest im Erdreich verankert. Das Gartentor bestimmt den Charakter der zusammengesetzten Ware. -Antragstellerangaben- Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Konstruktionsteile (Tore) aus Stahl" zur Codenummer 7308 3000 00 0 des Zolltarifs.
Es handelt sich i. W. um aus Stahl gefertigte, etwa 101 cm hohe Tore (Breite: etwa 111 cm), die mit einem Scharnier an einem Rahmen in Form eines Rosenbogens befestigt sind. Der Rosenbogen ist am unteren Ende mit zwei Lochungen zur Befestigung am Boden versehen. An den Seiten des Rosenbogens ist jeweils eine Ablage- bzw. Sitzfläche angebracht. Die Erzeugnisse sind zerlegt und können mit beigefügten Schrauben montiert werden. Abmessungen: Höhe: etwa 215 cm, maximale Breite: etwa 210 cm. - Antragstellerangaben - Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Konstruktionsteile (Tore und deren Rahmen) aus Stahl" zur Codenummer 7308 3000 00 0 des Elektronischen Zolltarifs.
"Rosenbogen mit Tür"; es handelt sich i. W. um aus Stahl gefertigte, etwa 110 cm hohe Tore (Breite: etwa 90 cm), die mit einem Scharnier an einem Rosenbogen (Höhe: etwa 230 cm; maximale Breite: etwa 120 cm; Tiefe: etwa 40 cm) befestigt sind. Die Erzeugnisse sind mit je zwei Lochungen an den untersten Seitenverstrebungen des Rosenbogens zur Befestigung am Boden versehen. Die Erzeugnisse sind zerlegt und können mit beigefügten Schrauben montiert werden. - Antragstellerangaben - Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Konstruktionsteile (Tore und deren Rahmen) aus Stahl" zur Codenummer 7308 3000 00 0 des Elektronischen Zolltarifs.
Notes that govern this classification
Zu Unterposition 7308 30 00: Die Erläuterungen zu Unterposition 3925 20 des HS gelten sinngemäß.
Zu Unterposition 7308 30: Hierher gehören auch Sicherheitstüren aus Stahl für Gebäude aller Art für den Innen- und Außenbereich.
Zu Unterposition 7308 30: 1. Automatische Stahlgleittür mit Mechanismus für Lifte (Aufzüge), zum Befestigen in den Wänden auf jedem Stockwerk eines Gebäudes am Eingang zum Aufzugschacht. Die Tür und der Mechanismus bewegen sich nicht mit der Aufzugkabine im Gebäude auf- und abwärts. Anwendung der Allgemeinen Vorschriften 1 und 6. 2. Sicherheitstüren aus Stahl für Gebäude für den Innen- und Außenbereich, bestehend aus folgenden Bestandteilen: - einer Außenverkleidung aus Stahl, - einem Bohrschutzschild, - Montageprofilen für die Außenverkleidung aus Stahl, - einer Stahlblende, - einer Längsverstärkung - einer Längsverstärkung und einer 3 Punkt Verriegelung, - Dichtungen, - einem omegaförmigen Verstärkungsprofil (Skelett), - einer Innenverkleidung aus Holz, - Montageprofilen für die Innenverkleidung aus Stahl, - einem Profilrahmen aus Stahl, - einem versenkbaren System zum Schutz gegen Zug …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr.1509/97 der Kommission vom 30. Juli 19971) (RV L1509/97): 4. Stallböden bestehend aus kunststoffbeschichtetem Streckblech aus Stahl mit ausgearbeiteter Randbegrenzung und mit angebrachten Verstrebungen an der Unterseite. Die Böden erleichtern die Reinigung der Ställe. Unterposition 7308 90 59 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie dem Wortlaut der KN-Codes 7308, 7308 90 und 7308 9059. DURCHFÜHRUNGSVERORDNUNG (EU) 2019/822 DER KOMMISSION vom 17. Mai 2019 (ABl. EU Nr. L 134, Seite 13) (RV L19/822) Ware (sogenannter Schraubpfahl) mit rundem Querschnitt, ca. 55 cm lang mit einem Außendurchmesser von 6 cm, aus feuerverzinktem Feinblech. …
Frequently asked questions
What does customs tariff code 7308.30.00.00.0 cover?
Code 7308.30.00.00.0 covers Tore, Türen, Fenster, und deren Rahmen und Verkleidungen, Tor- und Türschwellen. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7308.30.00.00.0?
The third-country duty rate for 7308.30.00.00.0 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7308.30.00.00.0?
The first six digits form the HS code: 730830. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7308.30.00.00.0 have?
7308.30.00.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7308.30.00.00.0 sit in the tariff?
7308.30.00.00.0 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7308 Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel > 730830 Doors, windows and their frames and thresholds for doors. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7308.30.00.00.0?
Yes. The EBTI database holds decisions on 7308.30.00.00.0, for example DEBTI40932/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7308.30.00.00.0 covered by CBAM?
Yes. 7308.30.00.00.0 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is 7308.30.00.00.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7308.30.00.00.0 to 2B352a. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7308.30.00.00.0 change?
7308.30.00.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.