Customs tariff code 7308.40: Equipment for scaffolding, shuttering, propping or pit-propping
Reference data as at 1 July 2026
Customs tariff code 7308.40 covers Equipment for scaffolding, shuttering, propping or pit-propping. The third-country duty rate is 0 %, plus import VAT.
7308.40 is HS subheading in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7308.40
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7308Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
- 7308.40Equipment for scaffolding, shuttering, propping or pit-propping
From HS code to customs tariff code 7308.40
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Längssvetsad rörprofil enligt uppgift tillverkad av stål, med påsvetsad rörhylsa i vardera ände. Rörprofilen föreligger i längder mellan 1,5 - 6 meter. Profilen används som expanderbar bergsförstärkningsbult vid förstärkning av berg i gruvorter och av väggar och tak i tunnlar. Rörprofilen är vid leverans förpackad i buntar om 50 eller 100 stycken per bunt.
Bricka enligt uppgift tillverkad av stålplåt, med måtten 150 X 150 mm och med ett ogängat centrumhål. Brickan används vid montering av expanderbara bergsförstärkningsbultar för förstärkning av berg i gruvorter och av väggar och tak i tunnlar.
CASTOR CONSTRUCTED FROM CAST IRON CENTRED WHEEL AND SUPERTHANE-POLYURETHANE TYRE. WITH A ROLLER BEARING TO CENTRE. DIMENSION 100CM, WIDTH 43MM. LOAD CAPABILITY 295KG.
COQUES EN ACIER DESTINEES A ETRE ASSEMBLEES AUTOUR D'UN PILIER IMMERGE. DU BETON SERA ENSUITE INJECTE DANS L'ESPACE ENTRE LA COQUE ET LE PILIER AFIN DE RENFORCER CE DERNIER . APRES SECHAGE CETTE COQUE METALLIQUE PEUT ETRE RETIREE OU RESTER SUR L'OUVRAGE.
ECHAFAUDAGE MULTIDIRECTIONNEL CONSTRUIT A BASE DE PIECES D'ACIER. LES MONTANTS, LES MOISES, LES MOISES DE SUPPORTS DE PLANCHER EN U ET LES DIAGONALES DE CONTREVENTEMENT PEUVENT ETRE RELIES HORIZONTALEMENT ET VERTICALEMENT. IL PEUT ETRE UTILISE AUSSI BIEN A L'INTERIEUR QUE SUR LA FACADE D'UN BATIMENT.
Es handelt sich um Rollen (Durchmesser: ca. 200 mm, Radbreite: ca. 50 mm) aus Kunststoff oder Kautschuk, die in einem Gehäuse (charakterbestimmend) mit Feststellbremse und drehbarer Befestigungsplatte, aus Stahl montiert sind. Die Befestigungsplatte (ca. 124 mm x ca. 124 mm) ist auf der Oberseite mit vier Lochungen und mit einer kreisförmigen Wulst speziell zur Festsetzung des Gerüstrohres ausgearbeitet. Die Erzeugnisse dienen als Gerüstrolle für Fahrgerüste (lt. Antragstellerangabe). Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Konstruktionsteile (Gerüstmaterial) aus Stahl" zur Unterposition 7308 40 des Harmonisierten Systems.
Es handelt sich um Rollen (Durchmesser: ca. 200 mm, Radbreite: ca. 50 mm) aus Kunststoff oder Kautschuk, die in einem Gehäuse (charakterbestimmend) mit Feststellbremse und drehbarer Befestigungsplatte, aus Stahl montiert sind. Die Befestigungsplatte (ca. 125 mm x ca. 125 mm) ist auf der Oberseite mit vier Lochungen und mit einer kreisförmigen Wulst speziell zur Festsetzung des Gerüstrohres ausgearbeitet. Die Erzeugnisse dienen als Gerüstrolle für Fahrgerüste (lt. Antragstellerangabe). Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Konstruktionsteile (Gerüstmaterial) aus Stahl" zur Unterposition 7308 40 des Harmonisierten Systems.
Es handelt sich um Rollen (Durchmesser: ca. 200 mm, Radbreite: ca. 50 mm) aus Kunststoff oder Kautschuk, die in einem Gehäuse (charakterbestimmend) mit Feststellbremse und drehbarer Befestigungsplatte, aus Stahl montiert sind. Die Befestigungsplatte (ca. 135 mm x ca. 111 mm) ist auf der Oberseite mit vier Lochungen und mit einer kreisförmigen Wulst speziell zur Festsetzung des Gerüstrohres ausgearbeitet. Die Erzeugnisse dienen als Gerüstrolle für Fahrgerüste (lt. Antragstellerangabe). Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Konstruktionsteile (Gerüstmaterial) aus Stahl" zur Unterposition 7308 40 des Harmonisierten Systems.
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr.1509/97 der Kommission vom 30. Juli 19971) (RV L1509/97): 4. Stallböden bestehend aus kunststoffbeschichtetem Streckblech aus Stahl mit ausgearbeiteter Randbegrenzung und mit angebrachten Verstrebungen an der Unterseite. Die Böden erleichtern die Reinigung der Ställe. Unterposition 7308 90 59 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie dem Wortlaut der KN-Codes 7308, 7308 90 und 7308 9059. DURCHFÜHRUNGSVERORDNUNG (EU) 2019/822 DER KOMMISSION vom 17. Mai 2019 (ABl. EU Nr. L 134, Seite 13) (RV L19/822) Ware (sogenannter Schraubpfahl) mit rundem Querschnitt, ca. 55 cm lang mit einem Außendurchmesser von 6 cm, aus feuerverzinktem Feinblech. …
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
3. Position 7308 KN 29.07.2026
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7308.40 cover?
Code 7308.40 covers Equipment for scaffolding, shuttering, propping or pit-propping. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7308.40?
The third-country duty rate for 7308.40 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7308.40?
The first six digits form the HS code: 730840. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7308.40 have?
7308.40 has six digits and matches the globally uniform HS subheading. A German import declaration requires the eleven-digit commodity code.
Where does 7308.40 sit in the tariff?
7308.40 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7308 Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7308.40?
Yes. The EBTI database holds decisions on 7308.40, for example SETIL 2013-5308. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7308.40 covered by CBAM?
Yes. 7308.40 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Does customs tariff code 7308.40 change?
7308.40 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.