Customs tariff code 7311.00.30.15.0: Behälter für Druckausgleich, aus Eisen (ausgenommen Gusseisen) oder Stahl, für…
Reference data as at 1 July 2026
Customs tariff code 7311.00.30.15.0 covers Behälter für Druckausgleich, aus Eisen (ausgenommen Gusseisen) oder Stahl, für bestimmte Luftfahrzeuge :, wiederbefüllbare Hochdruckflaschen aus Stahl, mit einem Fassungsraum von mehr als 120 ml, unabhängig von Durchmesser und Fassungsraum, auch mit Gewinde, auch mit poröser Masse gefüllt, mit oder ohne Innenbeschichtung oder -plattierung, unabhängig von der äußeren Endbearbeitung und der Form, auch mit eingebauter Gasblase, ob mit einem Ventil, Halsring, Fußring oder Rohrverbinder versehen oder nicht, auch als Flaschenbündel. The third-country duty rate is 2.7 %, plus import VAT.
7311.00.30.15.0 is national commodity code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7311.00.30.15.0
- Third-country duty
- 2.7 %
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7311Containers for compressed or liquefied gas, of iron or steel
- 7311.00Behälter aus Eisen oder Stahl, für verdichtete oder verflüssigte Gase
- 7311.00.30Other
- 7311.00.30.15Refillable high-pressure cylinders, of steel, of a capacity greater than 120 ml, of all diameters and volume capacities, whether or not threaded, whether filled with a porous mass or not, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders' fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle
- 7311.00.30.15.0Behälter für Druckausgleich, aus Eisen (ausgenommen Gusseisen) oder Stahl, für bestimmte Luftfahrzeuge :, wiederbefüllbare Hochdruckflaschen aus Stahl, mit einem Fassungsraum von mehr als 120 ml, unabhängig von Durchmesser und Fassungsraum, auch mit Gewinde, auch mit poröser Masse gefüllt, mit oder ohne Innenbeschichtung oder -plattierung, unabhängig von der äußeren Endbearbeitung und der Form, auch mit eingebauter Gasblase, ob mit einem Ventil, Halsring, Fußring oder Rohrverbinder versehen oder nicht, auch als Flaschenbündel
From HS code to customs tariff code 7311.00.30.15.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| ERGA OMNES | - | All other companies | Regulation 0244/26 | - |
| Türkiye | - | All other companies | Decision 0142/96 | - |
| China | 90.3 % | Other | Regulation 0244/26 | - |
| China | Cond: A cert: D-008 (01):59.700 % ; A (01):90.300 % | Zhejiang Winner Fire Fighting Equipment Co.,Ltd | Regulation 0244/26 | - |
| China | Cond: A cert: D-008 (01):57.700 % ; A (01):90.300 % | Tianjin Tianhai High Pressure Container Corp., Ltd Jiangsu Tianhai Special Equipment Co., Ltd Kuancheng Tianhai Pressure Container Co., Ltd. | Regulation 0244/26 | - |
| China | Cond: A cert: D-008 (01):58.900 % ; A (01):90.300 % | Anhui Clean Energy Co. Ltd. | Regulation 0244/26 | - |
| China | Cond: A cert: D-008 (01):58.900 % ; A (01):90.300 % | Chasing Technology (Changxing) Co., Ltd | Regulation 0244/26 | - |
| China | Cond: A cert: D-008 (01):58.900 % ; A (01):90.300 % | Jiangsu Minsheng Heavy Industry Co.,Ltd. | Regulation 0244/26 | - |
| China | Cond: A cert: D-008 (01):58.900 % ; A (01):90.300 % | Leebucc (Tianjin) Hydraulics Equipment Co., Ltd. | Regulation 0244/26 | - |
| China | Cond: A cert: D-008 (01):58.900 % ; A (01):90.300 % | Shandong Hongsheng Pressure Vessel Co., Ltd. | Regulation 0244/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) Nicht hierher gehören tragbare Reifenfüllgeräte, die neben einem Druckluftbehälter ein Manometer, einen Füllschlauch, Verschlussnippel sowie Lufteinlass- und Luftauslassventile besitzen und bei denen das Manometer dazu dient, den Druck im Reifen und nicht jenen im Behälter zu messen (Unterpositionen 9026 20 40 bis 9026 20 80).
Erläuterungen zum Harmonisierten System (HS) Es handelt sich hier um Behälter mit beliebigem Fassungsvermögen, die zum Transport und zur Lagerung von verdichteten oder verflüssigten Gasen (Helium, Sauerstoff, Argon, Wasserstoff, Acetylen, Kohlendioxid, Butangas usw.) verwendet werden. Einige, in der Regel zylinderförmige Behälter (Rohre oder Flaschen) sind widerstandsfähig und auf hohen Druck geprüft. Sie können nahtlos sein oder angeschweißte Böden haben. Sie können aus zwei in der Mitte zusammengeschweißten Teilen bestehen oder auch an der Seite des Zylinders zusammengeschweißt sein; die beiden Kappen können in letzterem Falle auch an den Zylindermantel angeschweißt sein. …
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Frequently asked questions
What does customs tariff code 7311.00.30.15.0 cover?
Code 7311.00.30.15.0 covers Behälter für Druckausgleich, aus Eisen (ausgenommen Gusseisen) oder Stahl, für bestimmte Luftfahrzeuge :, wiederbefüllbare Hochdruckflaschen aus Stahl, mit einem Fassungsraum von mehr als 120 ml, unabhängig von Durchmesser und Fassungsraum, auch mit Gewinde, auch mit poröser Masse gefüllt, mit oder ohne Innenbeschichtung oder -plattierung, unabhängig von der äußeren Endbearbeitung und der Form, auch mit eingebauter Gasblase, ob mit einem Ventil, Halsring, Fußring oder Rohrverbinder versehen oder nicht, auch als Flaschenbündel. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7311.00.30.15.0?
The third-country duty rate for 7311.00.30.15.0 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7311.00.30.15.0?
The first six digits form the HS code: 731100. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7311.00.30.15.0 have?
7311.00.30.15.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7311.00.30.15.0 sit in the tariff?
7311.00.30.15.0 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7311 Containers for compressed or liquefied gas, of iron or steel > 731100 Behälter aus Eisen oder Stahl, für verdichtete oder verflüssigte Gase > 73110030 Other > 7311003015 Refillable high-pressure cylinders, of steel, of a capacity greater than 120 ml, of all diameters and volume capacities, whether or not threaded, whether filled with a porous mass or not, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders' fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7311.00.30.15.0?
The EBTI database currently holds no valid decisions on 7311.00.30.15.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7311.00.30.15.0 covered by CBAM?
Yes. 7311.00.30.15.0 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7311.00.30.15.0?
Yes. Trade defence measures are in force on 7311.00.30.15.0, covering origin ERGA OMNES, Türkiye, China. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7311.00.30.15.0 change?
7311.00.30.15.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.