Customs tariff code 7317.00.60: Other
Reference data as at 1 July 2026
Customs tariff code 7317.00.60 covers Other. The third-country duty rate is 0 %, plus import VAT.
7317.00.60 is CN code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7317.00.60
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7317Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
- 7317.00Stifte, Nägel, Reißnägel, Krampen, gewellte oder abgeschrägte Klammern (ausgenommen Klammern der Position 8305) und ähnliche Waren, aus Eisen oder Stahl, auch mit Kopf aus anderen Stoffen, ausgenommen mit Kopf aus Kupfer
- 7317.00.60Other
From HS code to customs tariff code 7317.00.60
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Es handelt sich um einen Nagel aus Stahldraht mit rundem Kopf und zugespitztem Schaft. Abmessungen (Länge x Schaftdurchmesser): etwa 1036 x 6,35 mm. - Antragstellerangaben - Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "andere Nägel aus Stahldraht" zur Unterposition 7317 00 60 der Kombinierten Nomenklatur.
Es handelt sich um aus Stahldraht (max. Querschnittsabmessung: etwa 1,25 mm) gefertigte, U-förmige Klammern in verschiedenen Abmessungen, die an beiden Enden zugespitzt sind. Die Erzeugnisse dienen als Klammern für sog. Hammertacker (nicht Gegenstand dieser vZTA) und sind zu 5000 Stück in einer Box verpackt. - Antragstellerangaben - Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "andere Klammern aus Stahldraht" zur Unterposition 7317 0060 der Kombinierten Nomenklatur.
Konvexné klince s povrchovou úpravou pozinkovaním, vyrobené z ocele, s plochou hlavou. Rozmery: 4 x 40, 4 x 50, 4 x 90 mm.
Stavebné klince bez povrchovej úpravy, vyrobené z ocele, s plochou hlavou, rozmery: 2,8 x 70, 3,5 x 90, 4 x 120 mm.
Wyroby formowane na zimno ze stalowego drutu, o średnicy od 5,5 do 10 mm oraz długości od 180 do 310 mm. Elementy są proste, przynajmniej jeden koniec mają zaostrzony. Drugi koniec może być płaski, zagięty, miejscowo spęczony lub również zaostrzony. Wyrób jest umieszczany na końcu palika (słupka) wykonanego z tworzywa sztucznego, przeznaczonego do elektrycznych ogrodzeń i umożliwia zamocowanie palika w gruncie poprzez wciśnięcie części metalowej w podłoże. Wyroby są pakowane w opakowania kartonowe. Decyzja wydana w miejsce wiążącej informacji taryfowej nr PL BTI WIT-2021-001266 z 29.11.2021 r.
Conform descrierii solicitantului și a fotografiei publicate în baza de date, produsul reprezintă un cui striat pentru beton. Este fabricat prin presare la rece, din sârma de oțel. Produsul se utilizează pentru fixare în beton proaspăt turnat, are capul îngropat iar suprafața este striată. Este zincat electrolitic.
Es handelt sich um Drahtstifte (Pinnwandstifte) mit einem zugespitzten Schaft aus Stahldraht (Querschnittsabmessung: etwa 1,2 mm) und einem zylinderförmigen Kopf aus Kunststoff. Die Erzeugnisse sind zu jeweils 25 Stück auf eine bedruckte Pappunterlage mit Eurolochung aufgeblistert. Länge: etwa 19,9 mm. - Antragstellerangaben - Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "andere, den Reißnägeln ähnliche Waren, aus Stahldraht, mit Kopf aus anderen Stoffen" zur Unterposition 7317 0060 der Kombinierten Nomenklatur.
Es handelt sich um Nägel aus Eisendraht, mit flachem Kopf und mit einem zugespitzten Schaft (Durchmesser: 2,5 mm) am unteren Ende. Die Nägel sind im oberen Bereich des Schafts mit Rillen versehen. Länge: 45 mm; Durchmesser: 6,3 mm - Antragstellerangaben - Abbildung siehe Anlage. Derartige Waren gehören als "andere Nägel aus Eisendraht" zur Unterposition 7317 0060 der Kombinierten Nomenklatur.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Diese Position umfasst: A) Stifte, Nägel und ähnliche Waren aller Art, die hauptsächlich durch folgende Verfahren hergestellt werden: 1) Kaltpressen aus Draht der gewünschten Stärke. Die durch dieses Verfahren hergestellten Erzeugnisse (sog. Drahtstifte) haben einen flachen oder gewölbten Kopf; jedoch stellt man auch Stifte ohne Kopf her, die an einem oder beiden Enden zugespitzt sind. Man kann auch durch schräges Abschneiden des Schaftes Nägel mit zugespitztem Schaft herstellen. 2) Schmieden von Hand oder mit der Maschine. Bei diesem Verfahren wird ein Eisenschaft von vorbestimmter Stärke erhitzt, durch Hämmern zugespitzt, dann wird der Kopf durch Gesenkschmieden in einem Nageleisen geformt. 3) Schneiden aus Blech. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 762/2011 der Kommission vom 29. Juli 2011 (ABl. EU Nr. L 200/4) (RV L 762/11), geändert durch Durchführungsverordnung (EU) Nr. 441/2013 der Kommission vom 7. Mai 2013 (ABl. EU Nr. L 130) (RV L 441/13): Hohle, zylinderförmige, verzinkte Ware aus anderem als rostfreiem Stahl, ohne Gewinde und mit einer Öffnung über die gesamte Länge (so genannter Expressnagel). Ein Ende ist leicht nach außen gebogen. Das andere bildet eine scharfe Schnittkante. Die Ware wird als Halterung verwendet. Sie wird in ein gebohrtes Loch eingeschlagen, um beispielsweise eine Leiste schnell an einer Betonwand zu befestigen. Durch das scharfe Ende wird das Einschlagen erleichtert. …
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7317.00.60 cover?
Code 7317.00.60 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7317.00.60?
The third-country duty rate for 7317.00.60 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7317.00.60?
The first six digits form the HS code: 731700. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7317.00.60 have?
7317.00.60 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7317.00.60 sit in the tariff?
7317.00.60 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7317 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper > 731700 Stifte, Nägel, Reißnägel, Krampen, gewellte oder abgeschrägte Klammern (ausgenommen Klammern der Position 8305) und ähnliche Waren, aus Eisen oder Stahl, auch mit Kopf aus anderen Stoffen, ausgenommen mit Kopf aus Kupfer. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7317.00.60?
Yes. The EBTI database holds decisions on 7317.00.60, for example DEBTI43502/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 7317.00.60 change?
7317.00.60 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.