Customs tariff code 7318.12.90.10: For use in certain types of aircraft
Reference data as at 25 July 2026
Customs tariff code 7318.12.90.10 covers For use in certain types of aircraft. The third-country duty rate is 3.7 %, plus import VAT.
7318.12.90.10 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7318.12.90.10
- Third-country duty
- 3.7 %
- Declarable
- No
- Binding rulings
- 0
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7318Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel
- 7318.12Other wood screws
- 7318.12.90Other
- 7318.12.90.10For use in certain types of aircraft
From HS code to customs tariff code 7318.12.90.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3.7 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Türkiye | - | All other companies | Decision 0142/96 | - |
| ERGA OMNES | - | All other companies | Regulation 1036/16 | - |
| China | Cond: A cert: D-008 (01):39.600 % ; A (01):86.500 % | Ningbo Londex Industrial Co., Ltd. | Regulation 2159/23 | 2027-02-18 |
| China | Cond: A cert: D-008 (01):39.600 % ; A (01):86.500 % | Ningbo Zhongli Bolts Manufacturing Co., Ltd | Regulation 2602/23 | 2027-02-18 |
| China | Cond: A cert: D-008 (01):39.600 % ; A (01):86.500 % | Suzhou DTFLOCK Precision Fastener Co., Ltd. | Regulation 0191/22 | 2027-02-18 |
| China | Cond: A cert: D-008 (01):39.600 % ; A (01):86.500 % | Beijing Jinzhaobo High Strength Fastener Co., Ltd | Regulation 0191/22 | 2027-02-18 |
| China | Cond: A cert: D-008 (01):39.600 % ; A (01):86.500 % | Liaocheng BSC Metal Products Co., Ltd | Regulation 0191/22 | 2027-02-18 |
| China | Cond: A cert: D-008 (01):39.600 % ; A (01):86.500 % | Celo Suzhou Precision Fasteners Co. Ltd | Regulation 0191/22 | 2027-02-18 |
| China | Cond: A cert: D-008 (01):39.600 % ; A (01):86.500 % | Changshu City Standard Parts Factory Co., Ltd | Regulation 0191/22 | 2027-02-18 |
| China | Cond: A cert: D-008 (01):39.600 % ; A (01):86.500 % | CHENGLONG TECHNOLOGY (JIAXING) CO., LTD | Regulation 0191/22 | 2027-02-18 |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Zu Unterposition 7318 12: Der Begriff „Schraube“ umfasst weder Schraubhaken noch Ring- oder Ösenschrauben. Diese gehören zur Unterposition 7318 13.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EU) Nr. 602/2011 der Kommission vom 20. Juni 2011 (ABl. EU Nr. L 163/8) (RV L 602/11): Eine Ware, bestehend aus einer Schraube mit einer Unterlegscheibe, einer Spreizankerhülse und einer Mutter, alle Teile aus rostfreiem Stahl. Die Schraube hat einen sechseckigen Kopf, ist 55 mm lang, hat ein Gewinde über die gesamte Länge und verfügt über eine Zugfestigkeit von 490 MPa. Die Ankerhülse ist 42 mm lang und hat ohne Spreizung einen äußeren Durchmesser von 10 mm. Sie verfügt nicht über ein Gewinde. Die Ware wird zum Befestigen von Gegenständen auf hartem Untergrund, wie z. B. einer Betonmauer, verwendet, indem zuerst die Ankerhülse mit der Mutter in ein Bohrloch eingeführt und anschließend die Schraube eingefügt und festgeschraubt wird. …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Urteil des Europäischen Gerichtshofs (Achte Kammer) vom 26. April 2017 in der RS. C-51/16 Tatbestand: Der Ausgangsrechtsstreit betrifft die Rücknahme dreier verbindlicher Zolltarifauskünfte, die die Zollbehörden Stryker für drei Modelle von Implantatschrauben erteilt hatten. Diese sind dazu bestimmt, zur Behandlung von Knochenbrüchen oder zum Einsetzen von Prothesen in den menschlichen Körper eingebracht zu werden. Aus der Vorlageentscheidung geht hervor, dass diese Schrauben die folgenden gemeinsamen Merkmale aufweisen: - einen Durchmesser von 6,5 mm, 6,5 mm bzw. 4 mm, - eine Länge von 25 mm, 50 mm bzw. 16 mm, - ein speziell entwickeltes Gewinde, - ein für einen Inbusschlüssel vorgesehenes Kopfende, - einzeln mit Gebrauchsanweisung in einer kleinen Schachtel verpackt, - sterilisiert oder nicht sterilisiert. …
Gerichtliche Entscheidungen (GE) - national Interferenz – Schrauben zur Verblockung von Transplantaten im Bereich der Orthopädie/Unfallchirurgie siehe Gerichtliche Entscheidungen (GE) zu Abschnitt XV. Urteil des Finanzgerichts Düsseldorf vom 13. Juni 2007 - 4 K 1512/06 Z - zur Einreihung von Gewindestücken in die Kombinierte Nomenklatur. Entscheidungsgründe (Auszug): Von der Unterpos. 7318 15 30 1) werden andere Schrauben und Bolzen ohne Kopf aus nicht rostendem Stahl erfasst. Wenn auch der Klägerin einzuräumen sein mag, dass die Unterpos. 7318 15 30 1) nicht ausdrücklich Gewindestücke nennt, so ist sie gleichwohl im Vergleich zu der Unterpos. 7318 19 00, die nur andere, und damit nach dem Wortlaut der Pos. 7318 den Schrauben und Bolzen ähnliche Waren aus Eisen oder Stahl erfasst, genauer. ….. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7318.12.90.10 cover?
Code 7318.12.90.10 covers For use in certain types of aircraft. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7318.12.90.10?
The third-country duty rate for 7318.12.90.10 is 3.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7318.12.90.10?
The first six digits form the HS code: 731812. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7318.12.90.10 have?
7318.12.90.10 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7318.12.90.10 sit in the tariff?
7318.12.90.10 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel > 731812 Other wood screws > 73181290 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7318.12.90.10?
The EBTI database currently holds no valid decisions on 7318.12.90.10. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7318.12.90.10 covered by CBAM?
Yes. 7318.12.90.10 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7318.12.90.10?
Yes. Trade defence measures are in force on 7318.12.90.10, covering origin Türkiye, ERGA OMNES, China. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7318.12.90.10 change?
7318.12.90.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.