Customs tariff code 7325.10.00.10: Channel gratings and cast tops subject to standard EN 1433, to be fitted as a component…
Reference data as at 1 July 2026
Customs tariff code 7325.10.00.10 covers Channel gratings and cast tops subject to standard EN 1433, to be fitted as a component on channels in polymer, plastic, galvanised steel or concrete allowing surface water to flow into the channel. The third-country duty rate is 1.7 %, plus import VAT.
7325.10.00.10 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7325.10.00.10
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 0
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7325Other cast articles of iron or steel
- 7325.10Of non-malleable cast iron
- 7325.10.00aus nicht verformbarem Gusseisen
- 7325.10.00.10Channel gratings and cast tops subject to standard EN 1433, to be fitted as a component on channels in polymer, plastic, galvanised steel or concrete allowing surface water to flow into the channel
From HS code to customs tariff code 7325.10.00.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 2B352aBiological manufacturing and handling equipment, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören alle gegossenen Waren aus Eisen oder Stahl, anderweit weder genannt noch inbegriffen. Zu den von dieser Position erfassten Waren gehören Waren für Ver- und Entsorgungsleitungen (Fallklappen für Mannlöcher, Roste und Platten für Straßenkanäle usw.), Säulen, Deckel oder Platten für Hydranten, Trinkbrunnen, Säulenbriefkästen, Feuermeldesäulen und dergleichen, Poller, Wasserspeier und Dachrinnen, Schachtverkleidungen für Bergwerke, Mahlkörper für Brechmühlen, Tiegel ohne mechanische oder wärmetechnische Einrichtungen, Gegengewichte für Aufhängevorrichtungen, künstliche Blumen und Blätter (ausgenommen Waren der Pos. 8306) und Flaschen (Spezialbehälter) zum Transport von Quecksilber. Diese Position umfasst jedoch weder gegossene Erzeugnisse, die von anderen Positionen genauer erfasst sind (z. B. …
Zu Unterposition 7325 10 oder 7325 99: 1. Füllkörper, bestehend aus hohlen Gusseisenzylindern mit einer kreisförmigen Rippe im Inneren und ringförmigen Vertiefungen auf der Außenseite; diese Füllkörper werden in sog. Zementöfen dem Zementschlamm beigemischt, um die Hitze zu verteilen und den Trocknungsprozess zu erleichtern und zu beschleunigen.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2019/321 der Kommission vom 18. Februar 2019 (ABl. EU Nr. L 55/24) (RV L 19/321) Eine kreisförmige Ware mit einem Durchmesser von etwa 500 mm und einem Gewicht von etwa 23 kg. Sie besteht aus Gusseisen mit Kugelgrafit (duktilem Gusseisen, EN-GJS- 500-7). Die Ware ist zum Schutz vor Korrosion mit schwarzem Bitumen bestrichen. Die Ware ist gemäß der Norm EN 124 zertifiziert (Aufsätze und Abdeckungen zum Einbau in Flächen, die für Fußgänger und/oder Fahrzeugverkehr bestimmt sind) und wird als Kanaldeckel (z. B. für Regenwasserkanäle) verwendet. Siehe Abbildung Unterposition 7325 99 90(1) Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7325, 7325 99 und 7325 99 90. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes - 180. Sitzung des Ausschusses für den Zollkodex vom 3. bis 6. Juli 2017): Warenbeschreibung: Ein sogenannter Armband-Adapter, hergestellt aus Metallguss. Die Ware ermöglicht eine Befestigung aller Arten von Armbändern an einer Smartwatch. Einreihung: Die Ware ist in Anwendung der Allgemeinen Vorschriften 1 und 6 nach ihrer stofflichen Beschaffenheit in die Position 7325 einzureihen.
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7325.10.00.10 cover?
Code 7325.10.00.10 covers Channel gratings and cast tops subject to standard EN 1433, to be fitted as a component on channels in polymer, plastic, galvanised steel or concrete allowing surface water to flow into the channel. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7325.10.00.10?
The third-country duty rate for 7325.10.00.10 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7325.10.00.10?
The first six digits form the HS code: 732510. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7325.10.00.10 have?
7325.10.00.10 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7325.10.00.10 sit in the tariff?
7325.10.00.10 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7325 Other cast articles of iron or steel > 732510 Of non-malleable cast iron > 73251000 aus nicht verformbarem Gusseisen. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7325.10.00.10?
The EBTI database currently holds no valid decisions on 7325.10.00.10. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7325.10.00.10 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7325.10.00.10 to 2B352a. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7325.10.00.10 change?
7325.10.00.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.