Customs tariff code 7407.10: Of refined copper
Reference data as at 1 July 2026
Customs tariff code 7407.10 covers Of refined copper. The third-country duty rate is 4.8 %, plus import VAT.
7407.10 is HS subheading in the EU customs tariff, in chapter 74. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7407.10
- Third-country duty
- 4.8 %
- Declarable
- No
- Binding rulings
- 6
Where this code sits in the tariff
From HS code to customs tariff code 7407.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 4.8 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Dle deklarovaných údajů se jedná o měděné tyče s obsahem mědi 99,93 – 99,99 % hmotnostních (rafinovaná měď). Tyče o délce cca 40 mm jsou zhotoveny nastříháním z drátu o průměru 12 mm. Výrobek je určen k dalšímu zpracování.
Dle deklarovaných údajů se jedná o měděné tyče s obsahem mědi 99,93 – 99,99 % hmotnostních (rafinovaná měď). Tyče o délce cca 40 mm jsou zhotoveny nastříháním z drátu o průměru 8 mm. Výrobek je určen k dalšímu zpracování.
Dle deklarovaných údajů se jedná o měděné tyče s obsahem mědi 99,93 – 99,99 % hmotnostních (rafinovaná měď). Tyče o délce cca 40 mm jsou zhotoveny nastříháním z drátu o průměru 4 mm. Výrobek je určen k dalšímu zpracování.
Dle deklarovaných údajů se jedná o měděné tyče s obsahem mědi 99,93 – 99,99 % hmotnostních (rafinovaná měď). Tyče o délce cca 40 mm jsou zhotoveny nastříháním z drátu o průměru 2 mm. Výrobek je určen k dalšímu zpracování.
Dle deklarovaných údajů se jedná o měděné tyče s obsahem mědi 99,93 – 99,99 % hmotnostních (rafinovaná měď). Tyče o délce cca 40 mm jsou zhotoveny nastříháním z drátu o průměru 10 mm. Výrobek je určen k dalšímu zpracování.
Dle deklarovaných údajů se jedná o měděné tyče s obsahem mědi 99,93 – 99,99 % hmotnostních (rafinovaná měď). Tyče o délce cca 40 mm jsou zhotoveny nastříháním z drátu o průměru 6 mm. Výrobek je určen k dalšímu zpracování.
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) Hierher gehören auch Profile mit geschlossenem Hohlraum (Hohlprofile), die der Begriffsbestimmung für Rohre nicht entsprechen.
Erläuterungen zum Harmonisierten System (HS) Stangen und Stäbe werden durch Anmerkung 9 a) zu Abschnitt XV und Profile durch Anmerkung 9 b) zu Abschnitt XV definiert. Diese Erzeugnisse werden gewöhnlich durch Walzen, Strangpressen oder Ziehen, mitunter aber auch durch Schmieden (auf der Presse oder mit dem Hammer) hergestellt. Sie können (gegebenenfalls nach dem Glühen) durch Strecken, Richten oder andere Verfahren, die den Erzeugnissen einen höheren Fertigungsgrad verleihen, kaltfertiggestellt werden. Sie können auch bearbeitet (gelocht, gedreht, gewellt usw.) sein, vorausgesetzt dass sie durch diese Bearbeitung nicht den Charakter von Waren erhalten haben, die von anderen Positionen erfasst werden. Zu dieser Position gehören ebenfalls Hohlprofile und solche Rippenrohre, die durch Strangpressen hergestellt wurden. Nicht hierher gehören jedoch Rippenrohre, deren Rippen z. B. …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Urteil des Europäischen Gerichtshofs (Sechste Kammer) vom 18. Juni 2020 in der Rechtssache C-340/19 Tenor Die Position 7407 der Kombinierten Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in ihrer durch die Verordnung (EU) Nr. 1006/2011 der Kommission vom 27. September 2011 geänderten Fassung ist dahin auszulegen, dass rechteckige Blöcke aus Kupfer oder Kupferlegierungen, die warmgewalzt sind und deren Dicke 1/10 ihrer Breite übersteigt, deren Querschnitt jedoch unregelmäßige Poren, Löcher und Risse aufweist, zu dieser Position gehören können.
1. Im Sinne des Kapitels 74 gelten als: a) raffiniertes Kupfer: Metall mit einem Kupfergehalt von 99,85 GHT oder mehr (RV E7401A10) oder Metall mit einem Kupfergehalt von 97,5 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV E7401A20): Andere Elemente Element Höchstgrenze in GHT Ag Silber 0,25 As Arsen 0,5 Cd Cadmium 1,3 Cr Chrom 1,4 Mg Magnesium 0,8 Pb Blei 1,5 S Schwefel 0,7 Sn Zinn 0,8 Te Tellur 0,8 Zn Zink 1 Zr Zirconium 0,3 Andere Elemente (1), je 0,3 b) Kupferlegierungen: metallische Stoffe, ausgenommen nicht raffiniertes Kupfer, in denen Kupfer gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an mindestens einem dieser anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV E7401B10) oder 2) der Gesamtgehalt an diesen an …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7407.10 cover?
Code 7407.10 covers Of refined copper. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7407.10?
The third-country duty rate for 7407.10 is 4.8 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7407.10?
The first six digits form the HS code: 740710. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7407.10 have?
7407.10 has six digits and matches the globally uniform HS subheading. A German import declaration requires the eleven-digit commodity code.
Where does 7407.10 sit in the tariff?
7407.10 sits in this hierarchy: 74 COPPER AND ARTICLES THEREOF > 7407 Copper bars, rods and profiles. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7407.10?
Yes. The EBTI database holds decisions on 7407.10, for example CZ37-0011-2014. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 7407.10 change?
7407.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.