Customs tariff code 7408.19.10.00.0: Of which the maximum cross-sectional dimension exceeds 0,5 mm, mit einer größten…
Reference data as at 1 July 2026
Customs tariff code 7408.19.10.00.0 covers Of which the maximum cross-sectional dimension exceeds 0,5 mm, mit einer größten Querschnittsabmessung von mehr als 0,5 mm. The third-country duty rate is 4.8 %, plus import VAT.
7408.19.10.00.0 is national commodity code in the EU customs tariff, in chapter 74. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7408.19.10.00.0
- Third-country duty
- 4.8 %
- Declarable
- Yes
- Binding rulings
- 2
Where this code sits in the tariff
- 74COPPER AND ARTICLES THEREOF
- 7408Copper wire
- 7408.19Other
- 7408.19.10Of which the maximum cross-sectional dimension exceeds 0,5 mm
- 7408.19.10.00.0Of which the maximum cross-sectional dimension exceeds 0,5 mm, mit einer größten Querschnittsabmessung von mehr als 0,5 mm
From HS code to customs tariff code 7408.19.10.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 4.8 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Kupferdraht, versilbert Bei der Ware handelt es sich um ein massives Erzeugnis mit über die gesamte Länge gleichbleibendem, kreisförmigem Querschnitt (Draht). Der Draht hat einen Durchmesser von ca. 0,6 mm und besteht den Angaben nach aus Kupfer (CuSn 0,3). Er ist mit einer 1-5 µm dicken Schicht aus Silber überzogen. Die Ware wird auf Spulen aus Kunststoff gehandelt. Den Angaben nach wird der Draht als eindrähtige Ader zur Kontaktierung von Piezoantrieben in Diesel-Einspritzinjektoren verwendet. Die Ware ist nach ihrer Beschaffenheit als Draht aus Kupfer, aus raffiniertem Kupfer, andere, mit einer größten Querschnittsabmessung von mehr als 0,5 mm, in die Codenummer 7408 1910 00 0 des Zolltarifs einzureihen.
Kupferdraht Bei der Ware handelt es sich um ein massives Erzeugnis mit über die gesamte Länge gleichbleibendem, kreisförmige Querschnitt (Draht). Der Draht hat einen Durchmesser von ca. 0,6 mm und besteht den Angaben nach aus Kupfer (CuSn 0,3) und ist mit einer 1-5 µm dicken Schicht aus Silber überzogen. Die Ware wird auf Spulen aus Kunststoff gehandelt. Den Angaben nach wird der Draht als eindrähtige Ader zur Kontaktierung von Piezoantrieben in Diesel-Einspritzinjektoren verwendet. Die Ware ist nach ihrer Beschaffenheit als Draht aus Kupfer, aus raffiniertem Kupfer, andere, mit einer größten Querschnittsabmessung von mehr als 0,5 mm, in die Codenummer 7408 1910 00 0 des Zolltarifs einzureihen.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Draht wird durch Anmerkung 9 c) zu Abschnitt XV definiert. Er wird durch Walzen, Strangpressen oder Ziehen hergestellt und immer in Ringen oder Rollen gestellt. Die Erläuterungen zu Pos. 7407 zweiter Absatz gelten sinngemäß. Nicht zu dieser Position gehören: a) Dünner Bronzedraht, steril, für chirurgische Zwecke (Nähte) (Pos. 3006). b) Metallgarne und metallisierte Garne (Pos. 5605). c) Bindfäden und Seile mit Drahteinlage (Pos. 5607). d) Litzen, Kabel, Seile und andere Waren der Pos. 7413. e) Umhüllte oder gefüllte Elektroden zum Schweißen usw. (Pos. 8311). f) Isolierte Drähte für die Elektrotechnik (einschließlich der Lackdrähte) (Pos. 8544). g) Saiten für Musikinstrumente (Pos. 9209).
1. Im Sinne des Kapitels 74 gelten als: a) raffiniertes Kupfer: Metall mit einem Kupfergehalt von 99,85 GHT oder mehr (RV E7401A10) oder Metall mit einem Kupfergehalt von 97,5 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV E7401A20): Andere Elemente Element Höchstgrenze in GHT Ag Silber 0,25 As Arsen 0,5 Cd Cadmium 1,3 Cr Chrom 1,4 Mg Magnesium 0,8 Pb Blei 1,5 S Schwefel 0,7 Sn Zinn 0,8 Te Tellur 0,8 Zn Zink 1 Zr Zirconium 0,3 Andere Elemente (1), je 0,3 b) Kupferlegierungen: metallische Stoffe, ausgenommen nicht raffiniertes Kupfer, in denen Kupfer gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an mindestens einem dieser anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV E7401B10) oder 2) der Gesamtgehalt an diesen an …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Frequently asked questions
What does customs tariff code 7408.19.10.00.0 cover?
Code 7408.19.10.00.0 covers Of which the maximum cross-sectional dimension exceeds 0,5 mm, mit einer größten Querschnittsabmessung von mehr als 0,5 mm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7408.19.10.00.0?
The third-country duty rate for 7408.19.10.00.0 is 4.8 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7408.19.10.00.0?
The first six digits form the HS code: 740819. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7408.19.10.00.0 have?
7408.19.10.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7408.19.10.00.0 sit in the tariff?
7408.19.10.00.0 sits in this hierarchy: 74 COPPER AND ARTICLES THEREOF > 7408 Copper wire > 740819 Other > 74081910 Of which the maximum cross-sectional dimension exceeds 0,5 mm. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7408.19.10.00.0?
Yes. The EBTI database holds decisions on 7408.19.10.00.0, for example DEBTI42190/21-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 7408.19.10.00.0 change?
7408.19.10.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.