Customs tariff code 7410.21.00.10: Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium…
Reference data as at 1 July 2026
Customs tariff code 7410.21.00.10 covers Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil. The third-country duty rate is 5.2 %, plus import VAT.
7410.21.00.10 is TARIC code in the EU customs tariff, in chapter 74. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7410.21.00.10
- Third-country duty
- 5.2 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 74COPPER AND ARTICLES THEREOF
- 7410Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm
- 7410.21Of refined copper
- 7410.21.00auf Unterlage, aus raffiniertem Kupfer
- 7410.21.00.10Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil
From HS code to customs tariff code 7410.21.00.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 5.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1A003bManufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Kupferlaminat Bei der Ware handelt es sich um ein Flacherzeugnis bestehend aus zwei Folien aus raffiniertem Kupfer, die beidseitig auf eine Grundplatte aus mit Glasgewebe verstärktem Polytetrafluorethylen (PTFE) aufgebracht sind. Die Kupferfolien haben ohne Unterlage eine Dicke von weniger als 0,15 mm. Das Erzeugnis wird zur Herstellung von Leiterplatten verwendet. Die Ware ist nach ihrer Beschaffenheit als Folie aus raffiniertem Kupfer, mit einer Dicke (ohne Unterlage) von 0,15 mm oder weniger, beidseitig auf einer Unterlage aus Polytetrafluorethylen, mit Glasfasergewebe verstärkt, in den TARIC-Code 7410 2100 10 einzureihen.
Kupferlaminat Bei der Ware handelt es sich um ein Flacherzeugnis bestehend aus zwei Folien aus raffiniertem Kupfer, die beidseitig auf eine Grundplatte aus Teflon (Polytetrafluorethylen) mit keramikverstärktem Glasgewebe aufgebracht sind. Die Kupferfolien haben ohne Unterlage eine Dicke von weniger als 0,15 mm. Das Erzeugnis wird zur Herstellung gedruckter Schaltungen (Leiterplatten) in Hochfrequenzapplikationen verwendet. Die Ware ist nach ihrer Beschaffenheit als Folie aus raffiniertem Kupfer, mit einer Dicke (ohne Unterlage) von 0,15 mm oder weniger, beidseitig auf einer Unterlage aus Polytetrafluorethylen, in den TARIC-Code 7410 2100 10 einzureihen.
COPPER FOIL BACKED WITH POLYTETRAFLUOROETHYLENE FIBREGLASS. THICKNESS RANGES FROM 0.09MM TO 1.52MM INCLUDING BACKING. THICKNESS EXCLUDING BACKING DOES NOT EXCEED 0.15MM
COPPER FOIL BACKED WITH POLYTETRAFLUOROETHYLENE FIBREGLASS. THICKNESS RANGES FROM 0.25MM TO 1.52MM INCLUDING BACKING. THICKNESS EXCLUDING BACKING DOES NOT EXCEED 0.15MM
COPPER FOIL BACKED WITH POLYTETRAFLUOROETHYLENE FIBREGLASS. THICKNESS RANGES FROM 0.25MM TO 3.18MM INCLUDING BACKING. THICKNESS EXCLUDING BACKING DOES NOT EXCEED 0.15MM
COPPER FOIL BACKED WITH POLYTETRAFLUOROETHYLENE FIBREGLASS. THICKNESS RANGES FROM 0.01MM TO 0.125MM INCLUDING BACKING. THICKNESS EXCLUDING BACKING DOES NOT EXCEED 0.15MM
SHEET OF PTFE (POLYTETRAFLUOROETHYLENE) REINFORCED WITH GLASSFIBRE AND CLAD ON BOTH SIDES WITH COPPER FOIL FOR USE IN THE MANUFACTURE OF PRINTED CIRCUIT BOARDS.
Kupferfolie Es handelt sich um ein Flacherzeugnis (Platte), mit rechteckigem Querschnitt (max. 546 mm x 622 mm) und gleichbleibender Dicke, laut Materialspezifikation aus mit Polytetrafluorethylen (PTFE) laminiertem Glasfasergewebe, beidseitig mit je einer Folie aus raffiniertem Kupfer versehen. Das Erzeugnis dient als Grundmaterial für die Herstellung von gedruckten Schaltungen. Zolltariflich entspricht das Erzeugnis der Warenbeschreibung des TARIC 7410 2100 10.
Notes that govern this classification
Zu Unterposition 7410 21: 1. Tafeln und Platten aus Phenol-Formaldehydharz, auf die auf einer oder beiden Seiten ein Blech, Band oder eine Folie aus raffiniertem Kupfer aufgebracht wird, zum Herstellen von so genannten gedruckten elektrischen Schaltungen, wobei das Blech, das Band oder die Folie den Charakter der Ware bestimmt (elektrischer Leiter).
1. Im Sinne des Kapitels 74 gelten als: a) raffiniertes Kupfer: Metall mit einem Kupfergehalt von 99,85 GHT oder mehr (RV E7401A10) oder Metall mit einem Kupfergehalt von 97,5 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV E7401A20): Andere Elemente Element Höchstgrenze in GHT Ag Silber 0,25 As Arsen 0,5 Cd Cadmium 1,3 Cr Chrom 1,4 Mg Magnesium 0,8 Pb Blei 1,5 S Schwefel 0,7 Sn Zinn 0,8 Te Tellur 0,8 Zn Zink 1 Zr Zirconium 0,3 Andere Elemente (1), je 0,3 b) Kupferlegierungen: metallische Stoffe, ausgenommen nicht raffiniertes Kupfer, in denen Kupfer gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an mindestens einem dieser anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV E7401B10) oder 2) der Gesamtgehalt an diesen an …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7410.21.00.10 cover?
Code 7410.21.00.10 covers Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7410.21.00.10?
The third-country duty rate for 7410.21.00.10 is 5.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7410.21.00.10?
The first six digits form the HS code: 741021. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7410.21.00.10 have?
7410.21.00.10 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7410.21.00.10 sit in the tariff?
7410.21.00.10 sits in this hierarchy: 74 COPPER AND ARTICLES THEREOF > 7410 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm > 741021 Of refined copper > 74102100 auf Unterlage, aus raffiniertem Kupfer. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7410.21.00.10?
Yes. The EBTI database holds decisions on 7410.21.00.10, for example DE8929/15-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7410.21.00.10 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7410.21.00.10 to 1A003b. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7410.21.00.10 change?
7410.21.00.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.