Customs tariff code 7419.20.00.90: Other
Reference data as at 1 July 2026
Customs tariff code 7419.20.00.90 covers Other. The third-country duty rate is 3 %, plus import VAT.
7419.20.00.90 is TARIC code in the EU customs tariff, in chapter 74. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7419.20.00.90
- Third-country duty
- 3 %
- Declarable
- No
- Binding rulings
- 5
Where this code sits in the tariff
- 74COPPER AND ARTICLES THEREOF
- 7419Other articles of copper
- 7419.20Cast, moulded, stamped or forged, but not further worked
- 7419.20.00gegossen oder geschmiedet, jedoch nicht weiter bearbeitet
- 7419.20.00.90Other
From HS code to customs tariff code 7419.20.00.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1A006bEquipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and accessories therefor:
- 0016Weapons / munitions / military material (Ausfuhrliste Teil I A)
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
A termék sajtolt, sárgaréz hüvely, méretre vágva, de tovább nem megmunkálva. A termék elektronikus jel átvitelére képes csatlakozókba épül bele. A termék segíti a kapcsolatot a kábelen lévő árnyékolás és a csatlakozó fém háza között. A termék anyaga: CuZn35Pb2 (sárgaréz)
Système d’ancrage temporaire qui vient s’ajuster à la largeur de la poutre par bouton pressoir. Le système est sécurisé par une goupille. Il peut s'adapter à des poutres de 90 mm à 340mm de largeur. Capacité : 1 utilisateur de 140 kg. Résistance à la rupture > 22 kN. Il est utilisé par exemple pour un ancrage mobile pour utilisation horizontale sur IPN. Il peut être utilisé au dessus de la tête ou au niveau des pieds avec une longe ou un anti-chute à rappel automatique. Caractéristiques: - Tube en aluminium (28%). - 2 sabots (un fixe, un coulissant) en bronze (64%). - Un anneau de serrage en acier inoxydable et un anneau d'encrage en acier. Le support fixe et le support mobile sont coulés, la poutre de verrouillage est usinée. Poids: 1,85 kg.
Kit pour l'assemblage de compresseurs en série utilisés pour les groupes froids. L'ensemble du kit sert : - à monter le compresseur sur rail et empêcher les vibrations lors du fonctionnement. - à connecter deux compresseurs en série (en "tandem"). Le kit est composé de plot en caoutchouc, de rondelles/d'entretoise en acier, de joints en plastique, d'un tuyau en cuivre moulé et de manchon en acier moulé puis usiné recouvert d’une couche de cuivre.
Conform descrierii solicitantului și a fotografiilor publicate în baza de date, produsele reprezintă articole din cupru rafinat, cu diferite forme și dimensiuni. Sunt obținute prin ștantare din platbandă sau foaie de cupru. Produsele au o secțiune dreptunghiulară, o grosime de 2 mm și prezintă găuri rotunde. Produsele sunt nichelate electrolitic. Sunt folosite în ansamblul de platbande care formează un circuit electric într-un pachet de baterii și sunt utilizate în producția de autovehicule electrice. Produsele sunt prezentate în vamă în containere de lemn, ambalate în legături de câte zece produse și sunt protejate cu folie cu bule.
Lot composé d’une bague forgée 100 % en cuivre et d'une tige estampée sans filetage en acier inoxydable. Ces pièces sont destinées à l’étanchéité lors de l’assemblage des freins à disques pour vélo classique ou électrique.
Notes that govern this classification
Zu Unterposition 7419 20: Die Erläuterungen zu den Unterpositionen 7326 11 und 7326 19 gelten sinngemäß für diese Unterposition. Bei gegossenen Waren dürfen Gießzapfen und Gießköpfe entfernt sein.
1. Im Sinne des Kapitels 74 gelten als: a) raffiniertes Kupfer: Metall mit einem Kupfergehalt von 99,85 GHT oder mehr (RV E7401A10) oder Metall mit einem Kupfergehalt von 97,5 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV E7401A20): Andere Elemente Element Höchstgrenze in GHT Ag Silber 0,25 As Arsen 0,5 Cd Cadmium 1,3 Cr Chrom 1,4 Mg Magnesium 0,8 Pb Blei 1,5 S Schwefel 0,7 Sn Zinn 0,8 Te Tellur 0,8 Zn Zink 1 Zr Zirconium 0,3 Andere Elemente (1), je 0,3 b) Kupferlegierungen: metallische Stoffe, ausgenommen nicht raffiniertes Kupfer, in denen Kupfer gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an mindestens einem dieser anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV E7401B10) oder 2) der Gesamtgehalt an diesen an …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7419.20.00.90 cover?
Code 7419.20.00.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7419.20.00.90?
The third-country duty rate for 7419.20.00.90 is 3 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7419.20.00.90?
The first six digits form the HS code: 741920. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7419.20.00.90 have?
7419.20.00.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7419.20.00.90 sit in the tariff?
7419.20.00.90 sits in this hierarchy: 74 COPPER AND ARTICLES THEREOF > 7419 Other articles of copper > 741920 Cast, moulded, stamped or forged, but not further worked > 74192000 gegossen oder geschmiedet, jedoch nicht weiter bearbeitet. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7419.20.00.90?
Yes. The EBTI database holds decisions on 7419.20.00.90, for example HUBTIHU190000-2026-6298509106. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7419.20.00.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7419.20.00.90 to 1A006b, 0016. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7419.20.00.90 change?
7419.20.00.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.