Customs tariff code 7601.20.30: Slabs
Reference data as at 1 July 2026
Customs tariff code 7601.20.30 covers Slabs. The third-country duty rate is 6 %, plus import VAT.
7601.20.30 is CN code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7601.20.30
- Third-country duty
- 6 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
From HS code to customs tariff code 7601.20.30
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C002bMetal alloys, metal alloy powder and alloyed materials, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Brammen van aluminium met -volgens opgave- onder andere de volgende kenmerken: - vervaardigd van ruw gelegeerd aluminium; - gegoten; - in een ongesneden vorm aan de uiteinden; - intern afval (vanwege onregelmatigheden) van de plaatproductie; - een lengte van ongeveer 9 m; - een breedte van 1,4 tot 2,93 m; - een hoogte 0,51 tot 0,6 m.
Brammen van aluminium met -volgens opgave- de volgende kenmerken en eigenschappen: - bestemd om te worden gesmolten alvorens het verder wordt bewerkt; - rechthoekig; - gelegeerd; - met een rond of vlak uiteinde; - er kunnen oppervlaktescheuren zijn die mogelijk vocht hebben ingesloten; - een dikte van 600 of 635 mm; - een breedte van 1613, 1736, 1828, 1881, 1968 of 2150 mm; - een lengte van 6000 mm of minder; - een gewicht van maximaal 25.000 kg.
Brammen van aluminium met -volgens opgave- de volgende kenmerken en eigenschappen: - bestemd om te worden gesmolten alvorens het verder wordt bewerkt; - rechthoekig; - gelegeerd; - met een rond uiteinde; - een dikte: 600 of 635 mm; - een breedte variërend van 400 tot en met 1000 mm; - een lengte van 1613, 1736, 1828, 1881, 1968 of 2150 mm; - een gewicht variërend van 1300 tot en met 3500 kg. Aangeboden op twee houten lopers en twee banden van kunststof en voorzien van een label.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) In diese Position gehört Aluminium in Rohform, d. h. in flüssiger Form oder in Klumpen, Rohblöcken (Ingots), Knüppeln, Platten, Drahtbarren oder ähnlichen Formen wie sie beim Gießen aus Elektrolyse-Zellen oder beim Einschmelzen von Metallabfall und -schrott entstehen. Diese Erzeugnisse werden später gewalzt, geschmiedet, stranggepresst, gezogen, gehämmert, umgeschmolzen oder in Waren gegossen. Zu dieser Position gehören auch Pellets aus Aluminium, die hauptsächlich in der Metallurgie (als Desoxidationsmittel bei der Eisen- und Stahlherstellung) verwendet werden. Hinsichtlich der gegossenen oder gesinterten Stäbe usw. wird auf die Erläuterungen zu Pos. 7403 verwiesen, die hier sinngemäß gelten. Nicht zu dieser Position gehören Pulver und Flitter, aus Aluminium (Pos. 7603).
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 76 gelten als: a) nicht legiertes Aluminium: Metall mit einem Aluminiumgehalt von 99 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet: (RV F7601A00): Andere Elemente Element Höchstgrenze in GHT Fe + Si (Eisen und Silicium zusammen) 1 Andere Elemente (1), je 0,1 (2) b) Aluminiumlegierungen: metallische Stoffe, in denen Aluminium gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an einem der anderen Elemente oder an Eisen und Silicium zusammen die in der vorstehenden Tabelle angegebenen Höchstgrenzen überschreitet (RV F7601B10) oder 2) der Gesamtgehalt an diesen anderen Elementen mehr als 1 GHT beträgt (RV F7601B20). 2. …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7601.20.30 cover?
Code 7601.20.30 covers Slabs. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7601.20.30?
The third-country duty rate for 7601.20.30 is 6 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7601.20.30?
The first six digits form the HS code: 760120. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7601.20.30 have?
7601.20.30 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7601.20.30 sit in the tariff?
7601.20.30 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7601 Unwrought aluminium > 760120 Aluminium alloys. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7601.20.30?
Yes. The EBTI database holds decisions on 7601.20.30, for example NLBTI2025-0877. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7601.20.30 covered by CBAM?
Yes. 7601.20.30 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.
Is 7601.20.30 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7601.20.30 to 1C002b. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7601.20.30 change?
7601.20.30 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.