Customs tariff code 7604.10.10.90: Other
Reference data as at 1 July 2026
Customs tariff code 7604.10.10.90 covers Other. The third-country duty rate is 7.5 %, plus import VAT.
7604.10.10.90 is TARIC code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7604.10.10.90
- Third-country duty
- 7.5 %
- Declarable
- No
- Binding rulings
- 5
Where this code sits in the tariff
- 76ALUMINIUM AND ARTICLES THEREOF
- 7604Aluminium bars, rods and profiles
- 7604.10Of aluminium, not alloyed
- 7604.10.10Bars and rods
- 7604.10.10.90Other
From HS code to customs tariff code 7604.10.10.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
BARRE IN ALLUMINIO NON LEGATO. PER DICHIARAZIONE DI PARTE LE BARRE SONO REALIZZATE CON UN TENORE DI ALLUMINIO MINIMO PARI AL 99,5%. LE BARRE, PER DICHIARAZIONE DI PARTE, SONO REALIZZATE MEDIANTE ESTRUSIONE E TRAFILATURA. GLI ARTICOLI HANNO UNA SEZIONE TRASVERSALE COSTANTE SU TUTTA LA LUNGHEZZA E POSSONO AVERE FORMA TONDA, QUADRATA, RETTANGOLARE O ESAGONALE. LE BARRE POSSONO AVERE LE SEGUENTI DIMENSIONI: QUELLE DI FORMA TONDA DA UN DIAMETRO DI 3 MM A 600 MM, DI FORMA QUADRATA DA 4X 4 MM A 300 X 300 MM, DI FORMA RETTANGOLARE DA 8 AX 5 MM A 300 X 100 MM, DI FORMA ESAGONALE DA CHIAVE 6 MM A CHIAVE 60 MM. LA LUNGHEZZA DELLE BARRE E' VARIABILE FINO AD UN MASSIMO DI 6500 MM. LO SPESSORE DELLE BARRE RETTANGOLARI, PER DICHIARAZIONE DI PARTE, SUPERA IL DECIMO DELLA LARGHEZZA.
Accesorio preformado consistente en varios alambres de aluminio retorcidos ligerísimamente, de forma helicoidal y ondulados. Están marcados en su centro para su colocación. Están diseñados para proporcionar plena conductividad eléctrica y continuidad en conductores AI-Ac que han sufrido roturas en vanos de venas.
Varillas de refuerzo de aluminio. Están constituidas por alambres, de 1 a 10 unidades, atados, cortados a la mima longitud, ondulados y retorcidos ligerísimamente. Están marcadas en su centro para su colocación. Están diseñadas para reforzar el conductor y protegerlo de los daños que se originen, tanto estáticos como dinámicos en el punto de suspensión.
Varillas de reparación de aluminio. Están constituidas por alambres, de 1 a 15 unidades, atados, cortados a la mima longitud y ondulados (retorcidos ligeramente). Están diseñadas para proporcionar plena conductividad eléctrica y continuidad mecánica en conductores con roturas de venas en el vano.
Varillas de refuerzo de aluminio. Están constituidas por alambres, de 1 a 10 unidades, atados, cortados a la mima longitud, ondulados y retorcidos ligerísimamente. Están diseñadas para reforzar el conductor y protegerlo de los daños que se originen, tanto estáticos como dinámicos en el punto de suspensión.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Diese Erzeugnisse, die durch die Anmerkungen 9 a) und 9 b) zu Abschnitt XV definiert werden, entsprechen den gleichen Erzeugnissen aus Kupfer. Die Erläuterungen zu Pos. 7407 gelten daher sinngemäß für diese Position. Nicht zu dieser Position gehören: a) Zu Konstruktionszwecken vorgearbeitete Stangen (Stäbe) und Profile (Pos. 7610). b) Umhüllte Elektroden zum Schweißen usw. (Pos. 8311).
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 220. Sitzung des Ausschusses für den Zollkodex vom 31.05. bis 02.06.2020: Warenbeschreibung: Hohlprofile zur Herstellung von Zylindern für pneumatische Linearmotoren. Die Ware wird durch Extrudieren der Aluminiumlegierung hergestellt. Die Profile haben einen quadratischen Außenquerschnitt, weisen Längen von 2000 und 3000 mm auf und werden erst dann entsprechend der Größe des Druckluftzylinders auf die erforderliche Länge gebracht. Einreihung: Die Ware weist nicht die objektiven Eigenschaften eines Teils von pneumatischen Linearmotoren der Position 8412 auf. Folglich ist eine Einreihung als Teile von Motoren der Position 8412 ausgeschlossen. …
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 76 gelten als: a) nicht legiertes Aluminium: Metall mit einem Aluminiumgehalt von 99 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet: (RV F7601A00): Andere Elemente Element Höchstgrenze in GHT Fe + Si (Eisen und Silicium zusammen) 1 Andere Elemente (1), je 0,1 (2) b) Aluminiumlegierungen: metallische Stoffe, in denen Aluminium gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an einem der anderen Elemente oder an Eisen und Silicium zusammen die in der vorstehenden Tabelle angegebenen Höchstgrenzen überschreitet (RV F7601B10) oder 2) der Gesamtgehalt an diesen anderen Elementen mehr als 1 GHT beträgt (RV F7601B20). 2. …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7604.10.10.90 cover?
Code 7604.10.10.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7604.10.10.90?
The third-country duty rate for 7604.10.10.90 is 7.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7604.10.10.90?
The first six digits form the HS code: 760410. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7604.10.10.90 have?
7604.10.10.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7604.10.10.90 sit in the tariff?
7604.10.10.90 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7604 Aluminium bars, rods and profiles > 760410 Of aluminium, not alloyed > 76041010 Bars and rods. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7604.10.10.90?
Yes. The EBTI database holds decisions on 7604.10.10.90, for example ITBTIIT922104-2024-BTI0487. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7604.10.10.90 covered by CBAM?
Yes. 7604.10.10.90 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.
Does customs tariff code 7604.10.10.90 change?
7604.10.10.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.