Customs tariff code 7604.29.10.00.0: Stangen (Stäbe)
Reference data as at 1 July 2026
Customs tariff code 7604.29.10.00.0 covers Stangen (Stäbe). The third-country duty rate is 7.5 %, plus import VAT.
7604.29.10.00.0 is national commodity code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7604.29.10.00.0
- Third-country duty
- 7.5 %
- Declarable
- Yes
- Binding rulings
- 1
Where this code sits in the tariff
- 76ALUMINIUM AND ARTICLES THEREOF
- 7604Aluminium bars, rods and profiles
- 7604.29Other
- 7604.29.10Bars and rods
- 7604.29.10.00.0Stangen (Stäbe)
From HS code to customs tariff code 7604.29.10.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C002bMetal alloys, metal alloy powder and alloyed materials, as follows:
- 1C002dMetal alloys, metal alloy powder and alloyed materials, as follows:
- 1C202aAlloys, other than those specified in 1C002.b.3. or .b.4., as follows:
- 1C002bMetal alloys, metal alloy powder and alloyed materials, as follows:
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| ERGA OMNES | - | All other companies | Regulation 1036/16 | - |
| Türkiye | - | All other companies | Decision 0142/96 | - |
| China | Cond: A cert: D-008 (01):21.200 % ; A (01):32.100 % | Guangdong Haomei New Materials Co., Ltd | Regulation 0546/21 | - |
| China | Cond: A cert: D-008 (01):21.200 % ; A (01):32.100 % | Guangdong King Metal Light Alloy Technology Co., Ltd | Regulation 0546/21 | - |
| China | Cond: A cert: D-008 (01):25.000 % ; A (01):32.100 % | Press Metal International Ltd | Regulation 0546/21 | - |
| China | Cond: A cert: D-008 (01):25.000 % ; A (01):32.100 % | Press Metal International Technology Ltd | Regulation 0546/21 | - |
| China | Cond: A cert: D-008 (01):22.100 % ; A (01):32.100 % | Foshan Guangcheng Aluminium Co Ltd | Regulation 0546/21 | - |
| China | Cond: A cert: D-008 (01):22.100 % ; A (01):32.100 % | Foshan Modern Copper & Aluminum Extrusion Co.,Ltd | Regulation 0546/21 | - |
| China | Cond: A cert: D-008 (01):22.100 % ; A (01):32.100 % | Foshan City Nanhai Yongfeng Aluminium Co., Ltd | Regulation 0546/21 | - |
| China | Cond: A cert: D-008 (01):22.100 % ; A (01):32.100 % | Foshan QianYang aluminium Co.,Ltd | Regulation 0546/21 | - |
Open investigations, where duties may later apply: China
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Aluminium Stangen Bei der als "Pressbarren" bezeichneten Ware handelt es sich um massive, metallische Erzeugnisse mit kreisförmigem Querschnitt in Form von Stangen. Nach den Angaben bestehen sie aus verschiedenen Aluminium-Legierungen mit einem gewichtsmäßig vorherrschendem Aluminiumgehalt. Beispielhaft werden Legierungen mit den Bezeichnungen 2024 (AlCuMg-Legierung), 2099 (AlCuLi-Legierung), 7055 (AlCuMgZn-Legierung) und 7075 (AlCuMgZn-Legierung) angegeben. Die Stangen werden aus Ingots auf definierte Längen gesägt und auf definierte Durchmesser, z.B. 159 mm, 162 mm, 265 mm und 404 mm abgedreht. Die Bearbeitung geht über ein grobes Abgraten oder Entzundern hinaus. Danach handelt es sich zolltariflich um Stangen (Stäbe) aus Aluminiumlegierungen. Eine Rohform (Rohblöcke, Ingots) in Form von Stangen liegt nicht vor.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Diese Erzeugnisse, die durch die Anmerkungen 9 a) und 9 b) zu Abschnitt XV definiert werden, entsprechen den gleichen Erzeugnissen aus Kupfer. Die Erläuterungen zu Pos. 7407 gelten daher sinngemäß für diese Position. Nicht zu dieser Position gehören: a) Zu Konstruktionszwecken vorgearbeitete Stangen (Stäbe) und Profile (Pos. 7610). b) Umhüllte Elektroden zum Schweißen usw. (Pos. 8311).
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 220. Sitzung des Ausschusses für den Zollkodex vom 31.05. bis 02.06.2020: Warenbeschreibung: Hohlprofile zur Herstellung von Zylindern für pneumatische Linearmotoren. Die Ware wird durch Extrudieren der Aluminiumlegierung hergestellt. Die Profile haben einen quadratischen Außenquerschnitt, weisen Längen von 2000 und 3000 mm auf und werden erst dann entsprechend der Größe des Druckluftzylinders auf die erforderliche Länge gebracht. Einreihung: Die Ware weist nicht die objektiven Eigenschaften eines Teils von pneumatischen Linearmotoren der Position 8412 auf. Folglich ist eine Einreihung als Teile von Motoren der Position 8412 ausgeschlossen. …
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 76 gelten als: a) nicht legiertes Aluminium: Metall mit einem Aluminiumgehalt von 99 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet: (RV F7601A00): Andere Elemente Element Höchstgrenze in GHT Fe + Si (Eisen und Silicium zusammen) 1 Andere Elemente (1), je 0,1 (2) b) Aluminiumlegierungen: metallische Stoffe, in denen Aluminium gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an einem der anderen Elemente oder an Eisen und Silicium zusammen die in der vorstehenden Tabelle angegebenen Höchstgrenzen überschreitet (RV F7601B10) oder 2) der Gesamtgehalt an diesen anderen Elementen mehr als 1 GHT beträgt (RV F7601B20). 2. …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Frequently asked questions
What does customs tariff code 7604.29.10.00.0 cover?
Code 7604.29.10.00.0 covers Stangen (Stäbe). Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7604.29.10.00.0?
The third-country duty rate for 7604.29.10.00.0 is 7.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7604.29.10.00.0?
The first six digits form the HS code: 760429. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7604.29.10.00.0 have?
7604.29.10.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7604.29.10.00.0 sit in the tariff?
7604.29.10.00.0 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7604 Aluminium bars, rods and profiles > 760429 Other > 76042910 Bars and rods. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7604.29.10.00.0?
Yes. The EBTI database holds decisions on 7604.29.10.00.0, for example DEK/65/09-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7604.29.10.00.0 covered by CBAM?
Yes. 7604.29.10.00.0 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7604.29.10.00.0?
Yes. Trade defence measures are in force on 7604.29.10.00.0, covering origin ERGA OMNES, Türkiye, China. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Is 7604.29.10.00.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7604.29.10.00.0 to 1C002b, 1C002d, 1C202a, 1C002b. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7604.29.10.00.0 change?
7604.29.10.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.