Customs tariff code 7606.92.00.91.0: Hot rolled coils, andere :, ohne Unterlage, ohne innere Lagen aus anderem Material,, in…
Reference data as at 1 July 2026
Customs tariff code 7606.92.00.91.0 covers Hot rolled coils, andere :, ohne Unterlage, ohne innere Lagen aus anderem Material,, in Rollen (Coils) oder als aufgerollte Bänder, als auf Länge zugeschnittene Bleche oder in runder Form, mit einer Dicke von 6 mm oder weniger;, in Platten, mit einer Dicke von mehr als 6 mm, :, andere :, warmgewalzte Rollen (Coils), spannungsfrei geglüht, mit einer Dicke von 1,5 mm oder weniger, mit einer Breite von 800 mm bis 2 050 mm, zur Verwendung beim Herstellen von Aluminiumverbundplatten. The third-country duty rate is 7.5 %, plus import VAT.
7606.92.00.91.0 is national commodity code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7606.92.00.91.0
- Third-country duty
- 7.5 %
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 76ALUMINIUM AND ARTICLES THEREOF
- 7606Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm
- 7606.92Of aluminium alloys
- 7606.92.00andere, aus Aluminiumlegierungen
- 7606.92.00.91Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
- 7606.92.00.91.0Hot rolled coils, andere :, ohne Unterlage, ohne innere Lagen aus anderem Material,, in Rollen (Coils) oder als aufgerollte Bänder, als auf Länge zugeschnittene Bleche oder in runder Form, mit einer Dicke von 6 mm oder weniger;, in Platten, mit einer Dicke von mehr als 6 mm, :, andere :, warmgewalzte Rollen (Coils), spannungsfrei geglüht, mit einer Dicke von 1,5 mm oder weniger, mit einer Breite von 800 mm bis 2 050 mm, zur Verwendung beim Herstellen von Aluminiumverbundplatten
From HS code to customs tariff code 7606.92.00.91.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C002dMetal alloys, metal alloy powder and alloyed materials, as follows:
- 1C002dMetal alloys, metal alloy powder and alloyed materials, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Diese Erzeugnisse, die durch die Anmerkung 9 d) zu Abschnitt XV definiert werden, entsprechen den gleichen Erzeugnissen aus Kupfer. Die Erläuterungen zu Pos. 7409 gelten daher sinngemäß für diese Position. Nicht zu dieser Position gehören: a) Folien und dünne Bänder, mit einer Dicke von 0,2 mm oder weniger (Pos. 7607). b) Streckbleche und -bänder (Pos. 7616).
Zu Unterpositionen 7606 11 bis 7606 92: 1. Laminierte Aluminiumerzeugnisse aus zwei flachgewalzten Blechen aus Aluminium als äußere Lagen des laminierten Erzeugnisses und einer Platte oder Lage aus Kunststoffen als innere Lage oder Seele. Die Dicke jeder der äußeren Lagen beträgt bis zu 2,54 mm und die innere Lage hat eine Dicke zwischen ungefähr 0,02 mm und 2,29 mm. Die Erzeugnisse bestehen normalerweise aus Rollen (Coils) mit einer Breite bis zu ungefähr 1 500 mm oder können in Platten zugeschnitten sein. Die Seele verbessert die Geräuschdämmungseigenschaften der Erzeugnisse. Sie werden zur Außenverkleidung von Gebäuden, zur Innendekoration, zur Herstellung von Blechen für Kraftfahrzeugkarosserien, Haushaltsgeräten, Büromaschinen usw. verwendet.
Nationale Entscheidungen und Hinweise (NEH) Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 183. Sitzung des Ausschusses für den Zollkodex vom 23. bis 26. Oktober 2017: Warenbeschreibung: Rechteckige Platten, bestehend aus einem Kern aus Kunststoff (Polypropylen) mit einer individuellen Dicke von 2,0 mm bis 4,0 mm, der auf beiden Seiten mit Blechen aus einer Aluminiumlegierung bedeckt ist (die Dicke jedes Aluminiumblechs kann von 0,2 mm bis 0,3 mm reichen). Die Aluminiumbleche sind auf ihrer Oberfläche mit Farbe versehen oder lackiert. Ihre Abmessungen sind: 1220 x 3050 mm; 1500 × 3050 mm; 1500 x 4050 mm; 1500 x 5000 mm. Die Waren werden universell verwendet, z.B. …
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 76 gelten als: a) nicht legiertes Aluminium: Metall mit einem Aluminiumgehalt von 99 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet: (RV F7601A00): Andere Elemente Element Höchstgrenze in GHT Fe + Si (Eisen und Silicium zusammen) 1 Andere Elemente (1), je 0,1 (2) b) Aluminiumlegierungen: metallische Stoffe, in denen Aluminium gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an einem der anderen Elemente oder an Eisen und Silicium zusammen die in der vorstehenden Tabelle angegebenen Höchstgrenzen überschreitet (RV F7601B10) oder 2) der Gesamtgehalt an diesen anderen Elementen mehr als 1 GHT beträgt (RV F7601B20). 2. …
Frequently asked questions
What does customs tariff code 7606.92.00.91.0 cover?
Code 7606.92.00.91.0 covers Hot rolled coils, andere :, ohne Unterlage, ohne innere Lagen aus anderem Material,, in Rollen (Coils) oder als aufgerollte Bänder, als auf Länge zugeschnittene Bleche oder in runder Form, mit einer Dicke von 6 mm oder weniger;, in Platten, mit einer Dicke von mehr als 6 mm, :, andere :, warmgewalzte Rollen (Coils), spannungsfrei geglüht, mit einer Dicke von 1,5 mm oder weniger, mit einer Breite von 800 mm bis 2 050 mm, zur Verwendung beim Herstellen von Aluminiumverbundplatten. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7606.92.00.91.0?
The third-country duty rate for 7606.92.00.91.0 is 7.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7606.92.00.91.0?
The first six digits form the HS code: 760692. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7606.92.00.91.0 have?
7606.92.00.91.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7606.92.00.91.0 sit in the tariff?
7606.92.00.91.0 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm > 760692 Of aluminium alloys > 76069200 andere, aus Aluminiumlegierungen > 7606920091 Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7606.92.00.91.0?
The EBTI database currently holds no valid decisions on 7606.92.00.91.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7606.92.00.91.0 covered by CBAM?
Yes. 7606.92.00.91.0 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.
Is 7606.92.00.91.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7606.92.00.91.0 to 1C002d, 1C002d. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7606.92.00.91.0 change?
7606.92.00.91.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.