Customs tariff code 7607.11.19.60.0: For other uses than household aluminium foil, für andere Verwendungszwecke als als…
Reference data as at 1 July 2026
Customs tariff code 7607.11.19.60.0 covers For other uses than household aluminium foil, für andere Verwendungszwecke als als Aluminium-Haushaltsfolie, mit einer Dicke von 0,007 mm oder mehr, jedoch weniger als 0,008 mm, auch weichgeglüht, oder, mit einer Dicke von 0,008 mm oder mehr, jedoch nicht mehr als 0,018 mm, in Rollen mit einer Breite von mehr als 650 mm, auch weichgeglüht, oder, mit einer Dicke von mehr als 0,018 mm, jedoch weniger als 0,021 mm, auch weichgeglüht. The third-country duty rate is 7.5 %, plus import VAT.
7607.11.19.60.0 is national commodity code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 7607.11.19.60.0
- Third-country duty
- 7.5 %
- Declarable
- Yes
- Binding rulings
- 1
Where this code sits in the tariff
- 76ALUMINIUM AND ARTICLES THEREOF
- 7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm
- 7607.11Rolled but not further worked
- 7607.11.19Other
- 7607.11.19.60For other uses than household aluminium foil, - Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or, - Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or, - Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed
- 7607.11.19.60.0For other uses than household aluminium foil, für andere Verwendungszwecke als als Aluminium-Haushaltsfolie, mit einer Dicke von 0,007 mm oder mehr, jedoch weniger als 0,008 mm, auch weichgeglüht, oder, mit einer Dicke von 0,008 mm oder mehr, jedoch nicht mehr als 0,018 mm, in Rollen mit einer Breite von mehr als 650 mm, auch weichgeglüht, oder, mit einer Dicke von mehr als 0,018 mm, jedoch weniger als 0,021 mm, auch weichgeglüht
From HS code to customs tariff code 7607.11.19.60.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Türkiye | - | All other companies | Decision 0142/96 | - |
| ERGA OMNES | - | All other companies | Regulation 1036/16 | - |
| China | Cond: A cert: D-008 (01):28.500 % ; A (01):28.500 % | Jiangsu Zhongji Lamination Materials Co., Ltd. | Regulation 2287/21 | 2026-12-09 |
| China | Cond: A cert: D-008 (01):8.600 % ; A (01):18.200 % | Jiangsu Zhongji Lamination Materials Co., Ltd. | Regulation 2287/21 | 2026-12-23 |
| China | Cond: A cert: D-008 (01):10.100 % ; A (01):18.200 % | Xiamen Xiashun Aluminium Foil Co., Ltd. | Regulation 2287/21 | 2026-12-23 |
| China | Cond: A cert: D-008 (01):6.000 % ; A (01):28.500 % | Xiamen Xiashun Aluminium Foil Co., Ltd. | Regulation 2287/21 | 2026-12-09 |
| China | Cond: A cert: D-008 (01):18.200 % ; A (01):18.200 % | Yantai Donghai Aluminum Foil Co., Ltd. | Regulation 2287/21 | 2026-12-23 |
| China | Cond: A cert: D-008 (01):24.600 % ; A (01):28.500 % | Yantai Donghai Aluminum Foil Co., Ltd. | Regulation 2287/21 | 2026-12-09 |
| China | Cond: A cert: D-008 (01):12.300 % ; A (01):18.200 % | Zhangjiagang Fineness Aluminum Foil Co., Ltd | Regulation 2287/21 | 2026-12-23 |
| China | Cond: A cert: D-008 (01):23.600 % ; A (01):28.500 % | Zhangjiagang Fineness Aluminum Foil Co., Ltd | Regulation 2287/21 | 2026-12-09 |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Aluminiumfolie Bei der Ware handelt es sich den Angaben nach um Aluminiumfolie auf Rollen. Die Ware hat eine Breite von 760 , 5 mm und eine Dicke von 0 , 013 mm. Die Länge beträgt ca. 15.0000 m. Die Ware ist nur gewalzt und nicht weiter bearbeitet worden. Die Ware wird als Trägermaterial für Anoden und Kathoden in Lithium-Ionen-Batterien verwendet. Die Ware wird nach ihrer stofflichen Beschaffenheit als Folien und dünne Bänder, aus Aluminium mit einer Dicke (ohne Unterlage) von 0 , 2 mm oder weniger, ohne Unterlage, nur gewalzt, mit einer Dicke von weniger als 0 , 021 mm, andere, für andere Verwendungszwecke als als Aluminium-Haushaltsfolie, mit einer Dicke von wenigstens 0 , 008 mm oder mehr, jedoch nicht mehr als 0 , 018 mm, in Rollen mit einer Breite von mehr als 650 mm, auch weichgeglüht, in die Codenummer 7607 1119 60 0 eingereiht.
Notes that govern this classification
Zu Unterposition 7607 11: Kalt- oder warmgewalzte Erzeugnisse dieser Unterposition können zusätzlich noch folgende Bearbeitungen oder Oberflächenbearbeitungen erfahren haben: 1) Wärmebehandlungen wie Beseitigung der Spannung oder Glühen; diese Behandlungen haben auch die Beseitigung der Schmiermittelrückstände vom Walzen zur Folge. 2) Besäumen oder rechteckiges (auch quadratisches) Zuschneiden (z. B. Trennen eines breiten Bandes in mehrere schmale Bänder). 3) Trennen (Entrollen) dünner Bänder, mehrlagig gewalzt; diese Bearbeitung wird notwendig, wenn zwei oder mehr Rollen Bänder während des letzten Walzvorgangs gemeinsam gerollt werden. 4) Chemische Reinigung oder Waschung; dies wird normalerweise gemacht, um Ölrückstände zu entfernen, wenn keine Wärmebehandlung stattfindet.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2016/935 der Kommission vom 8. Juni 2016 (ABl. EU Nr. L 155/16) (RV L 16/935) Eine Ware, bestehend aus einem metallisierten Polyethylenterephtalat-(PET)-Film, der als Ausgangsmaterial für die Herstellung eines Aluminiumpigments verwendet wird und die folgenden wesentlichen Merkmale aufweist: - mindestens acht Aluminiumschichten mit einer Reinheit von 99,8 % oder mehr; - jede Aluminiumschicht hat eine optische Dichte von nicht mehr als 3,0 D; - die einzelnen Aluminiumschichten sind jeweils durch eine Acrylatpolymerschicht getrennt; - jede Aluminiumschicht ist bis zu 30 nm (0,03 μm) dick; - die Aluminium- und Acrylatpolymerschichten befinden sich auf einem Trägerfilm aus PET (Polyethylenterephthalat) mit einer Dicke von 12 μm. Die Ware wird auf Rollen von bis zu 50 000 m Länge gestellt. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statisti-sche Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 260. Sitzung des Aus-schusses für den Zollkodex vom 30. September bis 02. Oktober 2024: Warenbeschreibung: Aluminiumfolie, die beidseitig mit einer hydrophilen Schicht/Beschichtung überzogen ist und in Rollen (Coils) geliefert wird. Die hydrophile Schicht besteht aus weißer Farbe. Das Produkt hat ein-schließlich der Beschichtung eine Gesamtdicke von 0,120 mm, wohingegen die Breite des Produkts 196 mm beträgt. Die hydrophile Beschichtung besteht aus Silikat (weißes Pulver) und anderen chemischen Bestandteilen. …
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 76 gelten als: a) nicht legiertes Aluminium: Metall mit einem Aluminiumgehalt von 99 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet: (RV F7601A00): Andere Elemente Element Höchstgrenze in GHT Fe + Si (Eisen und Silicium zusammen) 1 Andere Elemente (1), je 0,1 (2) b) Aluminiumlegierungen: metallische Stoffe, in denen Aluminium gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an einem der anderen Elemente oder an Eisen und Silicium zusammen die in der vorstehenden Tabelle angegebenen Höchstgrenzen überschreitet (RV F7601B10) oder 2) der Gesamtgehalt an diesen anderen Elementen mehr als 1 GHT beträgt (RV F7601B20). 2. …
Frequently asked questions
What does customs tariff code 7607.11.19.60.0 cover?
Code 7607.11.19.60.0 covers For other uses than household aluminium foil, für andere Verwendungszwecke als als Aluminium-Haushaltsfolie, mit einer Dicke von 0,007 mm oder mehr, jedoch weniger als 0,008 mm, auch weichgeglüht, oder, mit einer Dicke von 0,008 mm oder mehr, jedoch nicht mehr als 0,018 mm, in Rollen mit einer Breite von mehr als 650 mm, auch weichgeglüht, oder, mit einer Dicke von mehr als 0,018 mm, jedoch weniger als 0,021 mm, auch weichgeglüht. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7607.11.19.60.0?
The third-country duty rate for 7607.11.19.60.0 is 7.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7607.11.19.60.0?
The first six digits form the HS code: 760711. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7607.11.19.60.0 have?
7607.11.19.60.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 7607.11.19.60.0 sit in the tariff?
7607.11.19.60.0 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm > 760711 Rolled but not further worked > 76071119 Other > 7607111960 For other uses than household aluminium foil, - Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or, - Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or, - Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7607.11.19.60.0?
Yes. The EBTI database holds decisions on 7607.11.19.60.0, for example DEBTI34519/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7607.11.19.60.0 covered by CBAM?
Yes. 7607.11.19.60.0 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7607.11.19.60.0?
Yes. Trade defence measures are in force on 7607.11.19.60.0, covering origin Türkiye, ERGA OMNES, China. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7607.11.19.60.0 change?
7607.11.19.60.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.