Customs tariff code

Customs tariff code 7607.11.19.91: Aluminium converter foil

Reference data as at 1 July 2026

Customs tariff code 7607.11.19.91 covers Aluminium converter foil. The third-country duty rate is 7.5 %, plus import VAT.

7607.11.19.91 is TARIC code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.

This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.

Customs code
7607.11.19.91
Third-country duty
7.5 %
Declarable
No
Binding rulings
5

Where this code sits in the tariff

  1. 76ALUMINIUM AND ARTICLES THEREOF
  2. 7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm
  3. 7607.11Rolled but not further worked
  4. 7607.11.19Other
  5. 7607.11.19.91Aluminium converter foil

From HS code to customs tariff code 7607.11.19.91

HS code7607.116 digits, uniform worldwide
CN code7607.11.198 digits, EU Combined Nomenclature
TARIC code7607.11.19.9110 digits, carries the EU measures

Duty rates and preferences

OriginDuty rateBasis
Third-country duty7.5 %MFN
Faroe Islands0 %Tariff preference
Melilla0 %Tariff preference
Occupied palestinian Territory0 %Tariff preference
Türkiye0 %Customs Union Duty
San Marino0 %Customs Union Duty
Andorra0 %Customs Union Duty
EU-Switzerland agreement: re-imported goods0 %Tariff preference
GSP-EBA (Special arrangement for the least-developed countries…0 %Tariff preference
Moldova, Republic of0 %Tariff preference
OCTs (Overseas Countries and Territories)0 %Tariff preference
United Kingdom0 %Tariff preference
Chile0 %Tariff preference

Rates from the EU TARIC database. Preferential rates require valid proof of origin.

Compliance regimes on this code

Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.

CBAMIn scopeAluminium2023/956
Anti-dumping and countervailing duties
OriginDuty rateProducerLegal basisValid until
Türkiye-All other companiesDecision 0142/96-
ERGA OMNES-All other companiesRegulation 1036/16-
ChinaCond: A cert: D-008 (01):28.500 % ; A (01):28.500 %Jiangsu Zhongji Lamination Materials Co., Ltd.Regulation 2287/212026-12-09
ChinaCond: A cert: D-008 (01):8.600 % ; A (01):18.200 %Jiangsu Zhongji Lamination Materials Co., Ltd.Regulation 2287/212026-12-23
ChinaCond: A cert: D-008 (01):10.100 % ; A (01):18.200 %Xiamen Xiashun Aluminium Foil Co., Ltd.Regulation 2287/212026-12-23
ChinaCond: A cert: D-008 (01):6.000 % ; A (01):28.500 %Xiamen Xiashun Aluminium Foil Co., Ltd.Regulation 2287/212026-12-09
ChinaCond: A cert: D-008 (01):18.200 % ; A (01):18.200 %Yantai Donghai Aluminum Foil Co., Ltd.Regulation 2287/212026-12-23
ChinaCond: A cert: D-008 (01):24.600 % ; A (01):28.500 %Yantai Donghai Aluminum Foil Co., Ltd.Regulation 2287/212026-12-09
ChinaCond: A cert: D-008 (01):12.300 % ; A (01):18.200 %Zhangjiagang Fineness Aluminum Foil Co., LtdRegulation 2287/212026-12-23
ChinaCond: A cert: D-008 (01):23.600 % ; A (01):28.500 %Zhangjiagang Fineness Aluminum Foil Co., LtdRegulation 2287/212026-12-09

Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.

Binding tariff information for this code

GRBTIDEC-022/2025Issued by GRValid until 2028-02-26

Φύλλο από κράμα αλουμινίου που έχει υποστεί απλή έλαση και έχει πάχος 0,010 χιλιοστά του μέτρου (και συγκεκριμένα 10,55 εκατομμυριοστά του μέτρου). Το προϊόν κατά δήλωση του ενδιαφερόμενου παρουσιάζεται σε ρολά βάρους 23 κιλών και πλάτους 358mm ή 448mm καταγωγής Κίνας και θα χρησιμοποιηθεί μετέπειτα για την παραγωγή ρολών αλουμινίου επικολλημένου με χαρτί.

BGBTIBG009999-2023-BTI11Issued by BGValid until 2026-01-23

Изделието представлява алуминиево фолио, без подложка, само валцовано, с дебелина 6,35 микрона (0,00635 mm). Представено е на рула с ширина от 750 mm до 1020 mm и тегло на ролката от 500 kg до 1000 kg. Фолиото е сребърно, меко, лице – гланц, гръб – мат. Изработено от алуминиева сплав 8079. Алуминиевото фолио е предназначено да бъде конвертирано (така нареченото алуминиево конвертиращо се фолио) чрез ламиниране към хартия, полиетилен или полиестер и след конвертиране ще се използва за производството на комбинирани опаковки за течни продукти (шампоани, балсами, сокове), на насипни продукти (кафе, сметани, хранителни продукти, цигари, сладолед) и други комбинирани опаковки, като фолиото може да е и вътрешен, и външен слой на опаковките. Съгласно данните от заявителя, конвертиращо се фолио се използва и влага единствено в промишлено производство в направата на опаковки.

DEBTI20991/22-2Issued by DEValid until 2025-07-31

Aluminiumfolie Bei der Ware handelt es sich den Angaben nach um eine Folie aus Aluminium. Die Ware hat eine Dicke von 0,009 mm. Die Rollenbreite kann 560 mm oder 620 mm betragen. Die Rollen wiegen zwischen 350 kg und 475 kg. Die Folie ist aus der Aluminiumlegierung 1235 hergestellt. Die Ware wird den Angaben nach als Kaschierfolie verwendet. Die Ware wird nach ihrer stofflichen Beschaffenheit als Folien und dünne Bänder, aus Aluminium (auch bedruckt oder auf Papier, Pappe, Kunststoff oder ähnlichen Unterlagen), mit einer Dicke (ohne Unterlage) von 0,2 mm oder weniger, ohne Unterlage, nur gewalzt, mit einer Dicke von weniger als 0,021 mm, andere, aus Aluminium zur Weiterverarbeitung bestimmte Folien und dünne Bänder, in den TARIC-Code 7607 1119 91 eingereiht.

DEBTI47260/21-1Issued by DEValid until 2025-01-23

Folie aus Aluminium Bei der Ware handelt es sich nach den Angaben um ein metallisches Flacherzeugnis (Folie) mit einer Dicke von 0,0063 mm in Rollen mit einem Stückgewicht von 1300 kg. Die Folie weist eine Breite von 1290 mm und eine Länge von 61400 m auf. Das Erzeugnis besteht aus einer Aluminiumlegierung (Alloy 8079-0) und wird nur durch Walzen hergestellt. Die Aluminiumfolie wird zur Produktion von aseptischen Getränkekartons verwendet. Die Ware ist aufgrund ihrer Beschaffenheit als Folien aus Aluminium, ohne Unterlage, nur gewalzt, mit einer Dicke von weniger als 0,021 mm, in Rollen mit einem Stückgewicht von mehr als 10 kg, andere, aus Aluminium zur Weiterverarbeitung bestimmte Folien, in den TARIC-Code 7607 1119 91 einzureihen.

FRBTIFR-BTI-2021-04684Issued by FRValid until 2024-06-20

Bobines de feuilles d’aluminium, d’épaisseur 0,0055 mm, de longueur 33 000 mm et de largeur 1020 mm, 1270 mm ou 1250 mm. La bobine pèse entre 500 et 800 kg. Les feuilles d’aluminium sont présentées sans support. Elles sont laminées, non cuites et composées d’une seule couche. Elles ne sont pas à usage domestique. Elles entrent dans la composition de différents films protecteurs, par encollage à d’autres matières (telles que le PE, le PET, etc.) La concentration en aluminium est de 99,35 % .

Notes that govern this classification

Pos. 7607

Zu Unterposition 7607 11: Kalt- oder warmgewalzte Erzeugnisse dieser Unterposition können zusätzlich noch folgende Bearbeitungen oder Oberflächenbearbeitungen erfahren haben: 1) Wärmebehandlungen wie Beseitigung der Spannung oder Glühen; diese Behandlungen haben auch die Beseitigung der Schmiermittelrückstände vom Walzen zur Folge. 2) Besäumen oder rechteckiges (auch quadratisches) Zuschneiden (z. B. Trennen eines breiten Bandes in mehrere schmale Bänder). 3) Trennen (Entrollen) dünner Bänder, mehrlagig gewalzt; diese Bearbeitung wird notwendig, wenn zwei oder mehr Rollen Bänder während des letzten Walzvorgangs gemeinsam gerollt werden. 4) Chemische Reinigung oder Waschung; dies wird normalerweise gemacht, um Ölrückstände zu entfernen, wenn keine Wärmebehandlung stattfindet.

Pos. 7607

Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2016/935 der Kommission vom 8. Juni 2016 (ABl. EU Nr. L 155/16) (RV L 16/935) Eine Ware, bestehend aus einem metallisierten Polyethylenterephtalat-(PET)-Film, der als Ausgangsmaterial für die Herstellung eines Aluminiumpigments verwendet wird und die folgenden wesentlichen Merkmale aufweist: - mindestens acht Aluminiumschichten mit einer Reinheit von 99,8 % oder mehr; - jede Aluminiumschicht hat eine optische Dichte von nicht mehr als 3,0 D; - die einzelnen Aluminiumschichten sind jeweils durch eine Acrylatpolymerschicht getrennt; - jede Aluminiumschicht ist bis zu 30 nm (0,03 μm) dick; - die Aluminium- und Acrylatpolymerschichten befinden sich auf einem Trägerfilm aus PET (Polyethylenterephthalat) mit einer Dicke von 12 μm. Die Ware wird auf Rollen von bis zu 50 000 m Länge gestellt. …

Pos. 7607

Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statisti-sche Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 260. Sitzung des Aus-schusses für den Zollkodex vom 30. September bis 02. Oktober 2024: Warenbeschreibung: Aluminiumfolie, die beidseitig mit einer hydrophilen Schicht/Beschichtung überzogen ist und in Rollen (Coils) geliefert wird. Die hydrophile Schicht besteht aus weißer Farbe. Das Produkt hat ein-schließlich der Beschichtung eine Gesamtdicke von 0,120 mm, wohingegen die Breite des Produkts 196 mm beträgt. Die hydrophile Beschichtung besteht aus Silikat (weißes Pulver) und anderen chemischen Bestandteilen. …

Kapitel 76

Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 76 gelten als: a) nicht legiertes Aluminium: Metall mit einem Aluminiumgehalt von 99 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet: (RV F7601A00): Andere Elemente Element Höchstgrenze in GHT Fe + Si (Eisen und Silicium zusammen) 1 Andere Elemente (1), je 0,1 (2) b) Aluminiumlegierungen: metallische Stoffe, in denen Aluminium gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an einem der anderen Elemente oder an Eisen und Silicium zusammen die in der vorstehenden Tabelle angegebenen Höchstgrenzen überschreitet (RV F7601B10) oder 2) der Gesamtgehalt an diesen anderen Elementen mehr als 1 GHT beträgt (RV F7601B20). 2. …

Subdivisions of this code

Frequently asked questions

What does customs tariff code 7607.11.19.91 cover?

Code 7607.11.19.91 covers Aluminium converter foil. Classification turns on the material, function, and intended use of the goods, not on their trade name.

What is the duty rate for 7607.11.19.91?

The third-country duty rate for 7607.11.19.91 is 7.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.

What is the HS code for 7607.11.19.91?

The first six digits form the HS code: 760711. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.

How many digits does 7607.11.19.91 have?

7607.11.19.91 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.

Where does 7607.11.19.91 sit in the tariff?

7607.11.19.91 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm > 760711 Rolled but not further worked > 76071119 Other. The parent headings and their notes help decide whether the classification holds.

Is there binding tariff information for 7607.11.19.91?

Yes. The EBTI database holds decisions on 7607.11.19.91, for example GRBTIDEC-022/2025. A BTI shows which product characteristics the customs authority relied on.

What happens if the customs tariff code is wrong?

An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.

Is 7607.11.19.91 covered by CBAM?

Yes. 7607.11.19.91 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.

Is there an anti-dumping duty on 7607.11.19.91?

Yes. Trade defence measures are in force on 7607.11.19.91, covering origin Türkiye, ERGA OMNES, China. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.

Does customs tariff code 7607.11.19.91 change?

7607.11.19.91 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.

Read more on classification

Classifying more than one product?

This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.