Customs tariff code 7607.11.90.96: Other
Reference data as at 1 July 2026
Customs tariff code 7607.11.90.96 covers Other. The third-country duty rate is 7.5 %, plus import VAT.
7607.11.90.96 is TARIC code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7607.11.90.96
- Third-country duty
- 7.5 %
- Declarable
- No
- Binding rulings
- 6
Where this code sits in the tariff
- 76ALUMINIUM AND ARTICLES THEREOF
- 7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm
- 7607.11Rolled but not further worked
- 7607.11.90Of a thickness of not less than 0,021 mm but not more than 0,2 mm
- 7607.11.90.96Other
From HS code to customs tariff code 7607.11.90.96
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Folie aus Aluminium Bei der Ware handelte es sich um eine Folie aus nicht legiertem Aluminium mit einer Dicke von 0 , 18 mm. Die Ware hat eine Abmessung von 1090 mm x 1250 mm, 1168 mm x 1235 mm oder nach Kundenwunsch. Die Ware ist als Folien und dünne Bänder, aus Aluminium (auch bedruckt oder auf Papier, Pappe, Kunststoff oder ähnlichen Unterlagen), mit einer Dicke (ohne Unterlage) von 0 , 2 mm oder weniger, ohne Unterlage, nur gewalzt, mit einer Dicke von 0 , 021 mm bis 0 , 2 mm, andere, andere, andere, in den TARIC-Code 7607 1190 96 einzureihen.
Lamiere in lega di alluminio ottenute mediante semplice laminazione, senza supporto importate sotto forma di fogli tagliati a misura. Il prodotto si presenta in fogli piani con spessore compreso tra 0,15 mm e 0,20 mm. Le lamiere sono confezionate in casse di legno oppure su pallet, protette mediante imballaggio in cartone per garantirne l'integrità durante il trasporto e la movimentazione.
Fogli in alluminio laminato di spessore compreso tra i 22 micron e 0,20 mm e una larghezza fra i 35 mm e i 2000 mm senza supporto. Il materiale si presenta in casse di legno compensato per evitare il danneggiamento durante il trasporto. Il campione fornito per le analisi è risultato essere un foglio in alluminio, lega 3003, semplicemente laminato, privo di supporto, con spessore pari a 0,040 mm.
Cintas de aluminio con un grosor de 0,1 mm y anchos de 20, 25 o 35 mm. que se presenta en bobinas con 45 kg de peso aproximado. Está compuesta por una parte interior formada por tres capas: una central de aleación de aluminio (núcleo) recubierta en sus dos caras por una capa de aleación de otros metales. El contenido de aluminio de esta parte interior es superior al 90%. Esta parte central está, a su vez, recubierta por ambas caras por una capa de aleación de aluminio con alto contenido en silicio que representa aproximadamente el 10% del grosor del artículo y tiene una temperatura de fusión inferior a la del núcleo. El porcentaje total de aluminio en el artículo final es superior al 90%. Según declaración del solicitante este artículo se destina a la fabricación de aletas para intercambiadores de calor de micro canal.
Rollo de papel de aluminio. Tiene una medida de 0,04mm x 140mm x 25m y un peso de 0,48 kg. Elongación (%): 7,5-8,6 t. Se utiliza para preparar cachimbas, sishas y pipas de agua. Se presenta para su venta al público en una caja con unas medidas de 17cm x 6,5cm x 6,5 cm.
Aluminiumfolie Bei der Ware handelt es sich den Angaben nach um eine Folie aus einer Aluminiumlegierung mit einer Dicke von 0,170 mm bis 0,185 mm. Die Folie hat eine Breite von 905 mm und eine Länge von 960 mm. Sie liegt nicht in Rollen vor. Außer Walzen sind keine weiteren Arbeitsschritte durchgeführt worden. Die Ware wird nach ihrer stofflichen Beschaffenheit als Folien und dünne Bänder, aus Aluminium (auch bedruckt oder auf Papier, Pappe, Kunststoff oder ähnlichen Unterlagen), mit einer Dicke (ohne Unterlage) von 0,2 mm oder weniger, ohne Unterlage, nur gewalzt, mit einer Dicke von 0,021 mm bis 0,2 mm, andere, andere, andere, in den TARIC-Code 7607 1190 96 eingereiht.
Notes that govern this classification
Zu Unterposition 7607 11: Kalt- oder warmgewalzte Erzeugnisse dieser Unterposition können zusätzlich noch folgende Bearbeitungen oder Oberflächenbearbeitungen erfahren haben: 1) Wärmebehandlungen wie Beseitigung der Spannung oder Glühen; diese Behandlungen haben auch die Beseitigung der Schmiermittelrückstände vom Walzen zur Folge. 2) Besäumen oder rechteckiges (auch quadratisches) Zuschneiden (z. B. Trennen eines breiten Bandes in mehrere schmale Bänder). 3) Trennen (Entrollen) dünner Bänder, mehrlagig gewalzt; diese Bearbeitung wird notwendig, wenn zwei oder mehr Rollen Bänder während des letzten Walzvorgangs gemeinsam gerollt werden. 4) Chemische Reinigung oder Waschung; dies wird normalerweise gemacht, um Ölrückstände zu entfernen, wenn keine Wärmebehandlung stattfindet.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2016/935 der Kommission vom 8. Juni 2016 (ABl. EU Nr. L 155/16) (RV L 16/935) Eine Ware, bestehend aus einem metallisierten Polyethylenterephtalat-(PET)-Film, der als Ausgangsmaterial für die Herstellung eines Aluminiumpigments verwendet wird und die folgenden wesentlichen Merkmale aufweist: - mindestens acht Aluminiumschichten mit einer Reinheit von 99,8 % oder mehr; - jede Aluminiumschicht hat eine optische Dichte von nicht mehr als 3,0 D; - die einzelnen Aluminiumschichten sind jeweils durch eine Acrylatpolymerschicht getrennt; - jede Aluminiumschicht ist bis zu 30 nm (0,03 μm) dick; - die Aluminium- und Acrylatpolymerschichten befinden sich auf einem Trägerfilm aus PET (Polyethylenterephthalat) mit einer Dicke von 12 μm. Die Ware wird auf Rollen von bis zu 50 000 m Länge gestellt. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statisti-sche Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 260. Sitzung des Aus-schusses für den Zollkodex vom 30. September bis 02. Oktober 2024: Warenbeschreibung: Aluminiumfolie, die beidseitig mit einer hydrophilen Schicht/Beschichtung überzogen ist und in Rollen (Coils) geliefert wird. Die hydrophile Schicht besteht aus weißer Farbe. Das Produkt hat ein-schließlich der Beschichtung eine Gesamtdicke von 0,120 mm, wohingegen die Breite des Produkts 196 mm beträgt. Die hydrophile Beschichtung besteht aus Silikat (weißes Pulver) und anderen chemischen Bestandteilen. …
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 76 gelten als: a) nicht legiertes Aluminium: Metall mit einem Aluminiumgehalt von 99 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet: (RV F7601A00): Andere Elemente Element Höchstgrenze in GHT Fe + Si (Eisen und Silicium zusammen) 1 Andere Elemente (1), je 0,1 (2) b) Aluminiumlegierungen: metallische Stoffe, in denen Aluminium gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an einem der anderen Elemente oder an Eisen und Silicium zusammen die in der vorstehenden Tabelle angegebenen Höchstgrenzen überschreitet (RV F7601B10) oder 2) der Gesamtgehalt an diesen anderen Elementen mehr als 1 GHT beträgt (RV F7601B20). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7607.11.90.96 cover?
Code 7607.11.90.96 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7607.11.90.96?
The third-country duty rate for 7607.11.90.96 is 7.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7607.11.90.96?
The first six digits form the HS code: 760711. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7607.11.90.96 have?
7607.11.90.96 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7607.11.90.96 sit in the tariff?
7607.11.90.96 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm > 760711 Rolled but not further worked > 76071190 Of a thickness of not less than 0,021 mm but not more than 0,2 mm. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7607.11.90.96?
Yes. The EBTI database holds decisions on 7607.11.90.96, for example DEBTI3408/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7607.11.90.96 covered by CBAM?
Yes. 7607.11.90.96 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.
Does customs tariff code 7607.11.90.96 change?
7607.11.90.96 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.