Customs tariff code 7607.19.90: Other, mit einer Dicke von 0,021 mm bis 0,2 mm
Reference data as at 1 July 2026
Customs tariff code 7607.19.90 covers Other, mit einer Dicke von 0,021 mm bis 0,2 mm. The third-country duty rate is 7.5 %, plus import VAT.
7607.19.90 is CN code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7607.19.90
- Third-country duty
- 7.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 7607.19.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Feuilles d’aluminium sans support composées de laque (1 ± 0,2 g/m²), d’une feuille d’aluminium (47 μm ± 8%) et d’un revêtement d’extrusion E 115/41 (30 ± 3g /m²). Elles sont livrées en bobines et sont destinées au scellage de bocaux en verre pour produits laitiers frais. Ce matériau peut être gaufré. L’article est laminé et a un revêtement d'extrusion.
Feuilles d’aluminium sans support composées des éléments suivants : laque (1,5 g/m²), d’une feuille d’aluminium (37 μm ± 8%) et d’un revêtement d’extrusion E 115/41 (30 ± 3g /m²). Elles sont livrées en bobines et sont destinées au scellage de bocaux en verre pour produits laitiers frais. Ce matériau peut être gaufré. L’article est laminé et a un revêtement d'extrusion.
Feuille d’aluminium sans support composée des éléments suivants : couche de laque ( 1 ± 0.2 g/ sqm), une feuille d'aluminium (BM) : 12 μm ± 8 %, une couche de revêtement par extrusion ± 5 g/m:, une feuille d'aluminium (BM) : 12 μm ± 8 %, et une de laque ; 1 ± 0.2 g/ sqm. Elle est livrée en bobines et est destinée à la fabrication de capsules pour flacons en verre.
Aluminium-Klebeband, antihaftbeschichtet Bei der Ware handelt es sich nach den Angaben um ein antihaftbeschichtetes Aluminiumklebeband, mit einer Kleberschicht auf der Unterseite. Die Ware wird auf Rollen mit einer Länge von 50 m und verschiedenen Breiten gehandelt. Die Dicke der Aluminiumfolie beträgt 0 , 05 mm und die Gesamtdicke 0 , 10 mm. Die Ware soll für Verklebungen unter hohen Temperaturbelastungen sowie zur Ummantelung, Isolierung, Abdichtung und Hohlraumversiegelung verwendet werden. Die Ware wird nach ihrer stofflichen Beschaffenheit als selbstklebende Folie aus Aluminium, ohne Unterlage, andere, mit einer Dicke von 0 , 021 mm bis 0 , 2 mm, in die Unterposition 7607 1990 der Kombinierten Nomenklatur eingereiht.
Aluminium-Klebeband, antihaftbeschichtet Bei der Ware handelt es sich den Angaben nach um ein antihaftbeschichtetes Aluminiumklebeband, mit einer Kleberschicht auf der Unterseite. Die Ware wird auf Rollen mit einer Länge von 50 m und einer Breite von 50 mm gehandelt. Die Dicke der Aluminiumfolie beträgt 0 , 08 mm und die Gesamtdicke 0 , 13 mm. Die Ware soll zur Abdeckung von galvanischen Prozessen, bei Hohlraumversiegelungen, zur Abdichtung von Behältern und Rohren sowie zur Verklebung von Isoliermaterial verwendet werden. Die Ware wird nach ihrer stofflichen Beschaffenheit als Folien und dünne Bänder, aus Aluminium (auch bedruckt oder auf Papier, Pappe, Kunststoff oder ähnlichen Unterlagen), mit einer Dicke (ohne Unterlage) von 0 , 2 mm oder weniger, ohne Unterlage, andere, mit einer Dicke von 0 , 021 mm bis 0 , 2 mm, in die Unterposition 7607 1990 der Kombinierten Nomenklatur eingereiht.
Feuille d’aluminium sans support composée des éléments suivants : laque (0,7 g/m²), d’une feuille d’aluminium (30 μm ± 8%) et d’un revêtement d’extrusion E 133/64 (30 ± 3g /m²). Elle est livrée en bobines ou en découpes à la presse et est destinée au scellage de bouteilles en polyéthylène haute densité et notamment aux produits UHT et aux boissons lactées.
Feuilles d’aluminium sans support composées des éléments suivants : laque (1 ± 0,2 g/m²), d’une feuille d’aluminium (37 μm ± 8%) et d’un revêtement d’extrusion E 110/1 (5 ± 3g /m²). Elles sont livrées en bobines et sont destinées à être enduites de colle thermofusible pour application de languettes de démoulage pour des bouteilles en polyéthylène à haute densité (HdPE) (produits UHT et aux boissons à base de lait). L’article est non laminé.
Feuille d’aluminium sans support composée des éléments suivants : laque ou impression à base de nitrocellulose : 1,0 à 3,0 g/m², d’aluminium trempé doux : 20µ ± 8%, d’apprêt (sans Bpa) : 1,0 ± 0,2g / m² et d’un revêtement extrudé à chaud : 25 ± 3g / m². Elle est livrée en bobine et est destinée à sceller des bocaux en verre pour des produits secs uniquement.
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2016/935 der Kommission vom 8. Juni 2016 (ABl. EU Nr. L 155/16) (RV L 16/935) Eine Ware, bestehend aus einem metallisierten Polyethylenterephtalat-(PET)-Film, der als Ausgangsmaterial für die Herstellung eines Aluminiumpigments verwendet wird und die folgenden wesentlichen Merkmale aufweist: - mindestens acht Aluminiumschichten mit einer Reinheit von 99,8 % oder mehr; - jede Aluminiumschicht hat eine optische Dichte von nicht mehr als 3,0 D; - die einzelnen Aluminiumschichten sind jeweils durch eine Acrylatpolymerschicht getrennt; - jede Aluminiumschicht ist bis zu 30 nm (0,03 μm) dick; - die Aluminium- und Acrylatpolymerschichten befinden sich auf einem Trägerfilm aus PET (Polyethylenterephthalat) mit einer Dicke von 12 μm. Die Ware wird auf Rollen von bis zu 50 000 m Länge gestellt. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statisti-sche Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 260. Sitzung des Aus-schusses für den Zollkodex vom 30. September bis 02. Oktober 2024: Warenbeschreibung: Aluminiumfolie, die beidseitig mit einer hydrophilen Schicht/Beschichtung überzogen ist und in Rollen (Coils) geliefert wird. Die hydrophile Schicht besteht aus weißer Farbe. Das Produkt hat ein-schließlich der Beschichtung eine Gesamtdicke von 0,120 mm, wohingegen die Breite des Produkts 196 mm beträgt. Die hydrophile Beschichtung besteht aus Silikat (weißes Pulver) und anderen chemischen Bestandteilen. …
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 76 gelten als: a) nicht legiertes Aluminium: Metall mit einem Aluminiumgehalt von 99 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet: (RV F7601A00): Andere Elemente Element Höchstgrenze in GHT Fe + Si (Eisen und Silicium zusammen) 1 Andere Elemente (1), je 0,1 (2) b) Aluminiumlegierungen: metallische Stoffe, in denen Aluminium gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an einem der anderen Elemente oder an Eisen und Silicium zusammen die in der vorstehenden Tabelle angegebenen Höchstgrenzen überschreitet (RV F7601B10) oder 2) der Gesamtgehalt an diesen anderen Elementen mehr als 1 GHT beträgt (RV F7601B20). 2. …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
- 7607.19.90.75Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
- 7607.19.90.84Alloyed, for use as body panels in the car industry
- 7607.19.90.93Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
- 7607.19.90.94Other
- 7607.19.90.95Other
- 7607.19.90.96Other
Frequently asked questions
What does customs tariff code 7607.19.90 cover?
Code 7607.19.90 covers Other, mit einer Dicke von 0,021 mm bis 0,2 mm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7607.19.90?
The third-country duty rate for 7607.19.90 is 7.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7607.19.90?
The first six digits form the HS code: 760719. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7607.19.90 have?
7607.19.90 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7607.19.90 sit in the tariff?
7607.19.90 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm > 760719 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7607.19.90?
Yes. The EBTI database holds decisions on 7607.19.90, for example FRBTIFR-BTI-2025-07907. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7607.19.90 covered by CBAM?
Yes. 7607.19.90 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.
Does customs tariff code 7607.19.90 change?
7607.19.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.