Customs tariff code 7610.90.90.92: Products in a packaged kit with the necessary parts to assemble a finished product…
Reference data as at 1 July 2026
Customs tariff code 7610.90.90.92 covers Products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’). The third-country duty rate is 6 %, plus import VAT.
7610.90.90.92 is TARIC code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7610.90.90.92
- Third-country duty
- 6 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 76ALUMINIUM AND ARTICLES THEREOF
- 7610Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures
- 7610.90Other
- 7610.90.90Other
- 7610.90.90.92Products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’)
From HS code to customs tariff code 7610.90.90.92
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0010Weapons / munitions / military material (Ausfuhrliste Teil I A)
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Pergola autoportante à structure en aluminium, avec une toile de toit coulissante et déperlante en polyester. Elle est vendue en kit, à assembler avant utilisation. Les pieds de la pergola possèdent des trous pour la fixer au sol. Plusieurs tailles sont disponibles selon les modèles. Structure en aluminium, finition peinture thermolaquée. Toile de toit 100% polyester, densité 180g/m², UPF50+.
Profilés ne contenant pas plus de 99,3% d’aluminium, présentés en kit et non assemblés utilisés pour le montage d’une paroi de douche, avec ou sans battant pivotant. Les parties en verre ne sont pas incluses. Les produits sont assortis d’accessoires et de la quincaillerie nécessaires au montage. Les différents éléments sont conditionnés ensemble pour la vente au détail.
Kit d’extensibilité contenant un profilé en aluminium, trois vis en acier inoxydable et un cache en ABS nécessaires au montage. Le profilé ne contient pas plus de 99,3% d’aluminium. Ce kit est non-assemblé et est utilisé pour ajuster l’installation d’une paroi de douche en verre déjà existante. Les différents éléments sont conditionnés ensemble pour la vente au détail.
Conform informațiilor publicate de solicitant și imaginilor încărcate în baza de date, produsul reprezintă o pergolă de grădină, prezentată demontată. Acesta include toate piesele necesare pentru asamblare, fiecare piesă fiind ambalată individual în ambalaj de carton și livrate intr-un singur colet. Este destinat utilizării în exterior pentru crearea unui spațiu umbrit și are următoarele caracteristici: - Dimensiuni produs : 300 x 400 x 230 cm; - Material pergolă: cadrul (suporturi și grinzi) este din aluminiu, iar barele de susținere ale copertinei sunt din oțel; - Copertină reglabilă din material textil (poliester), formată din două bucăți, cu dimensiunile de: 343 x 186,5 cm fiecare; - Greutate cadru metalic: 28.47 kg; Greutate copertina textil: 2,8 kg; - ambalare: 1 colet (tip ambalare in detaliu): fiecare articol este ambalat într-un ambalaj de carton (k/d) dimensiuni / volum colet: 398 x 25 x 22 cm /0,219 mc g.w./n.w.: 35,8 / 31,27kgs.
Kit di profili e di montaggio per box doccia che includono anche gli accessori per il montaggio. I kit sono composti da tutte le parti necessarie affinché i box doccia possano essere montati e fissati al muro o ai piatti doccia senza ulteriori lavorazioni o finiture. Ciascun kit di profili e montaggio, destinato alle diverse tipologie di modelli box doccia. Il dettaglio della composizione dei diversi Kit è descritto in allegato . I tre assortimenti sopra menzionati si presentano imballati separatamene in scatole.
Conform descrierii si imaginilor publicate in baza de date, produsul reprezinta o poarta pietonala batanta, cu un singur canat/ foaie, realizata structural din profile de aluminiu, pentru uz exterior. Produsul are structura metalica mobila, cu deschidere pivotanta simpla, destinata controlului accesului pietonal. Canatul este proiectat pentru montaj pe balamale reglabile si permite instalarea ulterioara a sistemelor de inchidere sau automatizare. Designul foii de poarta asamblate este de tip semi-inchis, fiind compus dintr-o grila de lamele paralele dispuse orizontal, cu spatii libere tehnice in zona superioara. Componentele metalice sunt finisate prin vopsire in camp electrostatic. Dimensiuni foaie poarta: lungime 0,9m /inaltime 1,5m, greutate: aprox. 35 kg per kit ambalat. Componenta kitului: - subansamble din aluminiu, - accesorii de feronerie necesare montajului: 2 stalpi poarta, 2 stalpi orizontali, 4 benzi de protectie, 13 panouri grila (lamele) si 8 suporturi opritoare. Fixarea structurala si ancorarea pe zidarie se realizeaza exclusiv cu feroneria dedicata inclusa in pachet (un stalp de perete, dopuri rotunde/ patrate, suporturi sudate superior/ inferior, un pivot de fixare cu patru colturi, elemente filetate –suruburi, piulite, saibe, alaturi de elemente de fixare in perete formate din bolturi de ancorare, suruburi autoforante si cu imbus). Produsul se prezinta in stare neasamblata, sub forma kit-ului complet de componente si accesorii, insotit de manual de instructiuni.
Conform descrierii si imaginilor publicate in baza de date, produsul reprezinta un set de porti batante cu două foi (canaturi), realizate integral din profile de aluminiu vopsite in camp electrostatic, pentru utilizare la exterior. Fiecare panou principal are un design de tip semi-inchis cu lamele paralele orizontale (tip grila). Structura metalica modulara din aluminiu este destinata controlului accesului auto si delimitarii perimetrale in zone rezidentiale. Functioneaza ca o poarta batanta cu deschidere dubla (doua canaturi simetrice) si este proiectata pentru a permite atasarea optionala a sistemelor de automatizare cu motoare electrice (care nu fac obiectul prezentei decizii ITO). Specificatii tehnice: lungime foaie poarta 1,5m / inaltime 1,7m; greutate totala: aprox. 90kg. Kitul original include subansamble din profile de aluminiu (stalpi de poarta verticali, stalpi orizontali de legatura, panouri grila intermediare) alaturi de accesoriile specifice de montaj: 2 stalpi de perete, benzi decorative, opritoare de plastic, capace de protectie pentru profile. Fixarea structurala se realizeaza exclusiv cu feroneria dedicata din pachet: suruburi autoforante si suruburi cu imbus, bolturi de ancorare expansionabile pentru zidarie, pivoti de fixare cu patru colturi, suporturi de stalp sudate (inferioare/ superioare) si piulite. Produsul se prezinta in stare neasamblata, sub forma kit-ului complet de componente si accesorii, insotit de manualul tehnic de instalare si utilizare.
Conform descrierii si imaginilor publicate in baza de date, produsul reprezinta un panou modular de gard, neasamblat, sub forma unui kit complet de componente si accesorii. Are structura metalica modulara, din aluminiu tratat anticoroziv si acoperit cu strat de vopsea pulbere aplicata electrostatic. Produsul asamblat prezinta un design modern, de tip grila semi-inchisa cu lamele paralele dispuse orizontal. Dimensiuni panou gard: lungime 2m /inaltime 1,2m, greutate bruta standard: aprox. 42 kg per kit complet. Componenta kitului: - 2 stalpi de gard, - 8 panouri grila (lamele), - 4 opritoare de lungime 1180mm, 16 opritoare de 130mm, 2 opritoare de 50mm si 4 opritoare de 30mm. Pachetul include accesoriile de fixare si finisare: 2 capace inferioare decorative stanga, 2 capace inferioare dreapta, 2 capace superioare decorative pentru stalp, 2 stalpi patrati cu baza sudata pentru ancorare, 2 suporturi in forma de L, 8 bolturi de fixare pentru beton si 10 suruburi autofiletante. Produsul este destinat imprejmuirii perimetrale rezidentiale sau comerciale, cu rol de delimitare si securizare a proprietatii. Se livreaza in stare dezasamblata si se prezinta ambalat in cutii de carton, insotit de manual de instructiuni.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Die Erläuterungen zu Pos. 7308 gelten sinngemäß für diese Position. Konstruktionsteile aus Aluminium sind manchmal nicht auf die übliche Weise (mit Nieten, Bolzen usw.) zusammengesetzt, sondern z. B. mit Kunstharzen zusammengeklebt. Man verwendet Aluminium und seine Legierungen, insbesondere wegen ihres geringen Gewichts, manchmal an Stelle von Eisen und Stahl beim Bau von Gerüsten, vorgefertigten Konstruktionen, Schiffsbauten, Brücken, Schiebetüren, Masten für elektrische Leitungen und Funkanlagen, Grubenstempeln, Tür- und Fensterrahmen, Geländern usw. Nicht zu dieser Position gehören: a) Metallinstallationen, die erkennbar Teile von Waren der Kapitel 84 bis 88 sind. b) Metallkonstruktionen des Kapitels 89. c) Vorgefertigte Gebäude (Pos. 9406).
Zu Unterposition 7610 90: 1. Vorgearbeitete gelochte Winkeleisen für Konstruktionen aus Metallelementen, wie Regale, Gestelle, Möbel, Treppen, Gerüste, Tragkonstruktionen usw., einzeln oder in ganzen Sätzen: 1. die zerlegt oder nicht zusammengesetzt Waren darstellen, die wie die zusammengesetzten Waren einzureihen wären: Aus Aluminium. 2. die zerlegte oder nicht zusammengesetzte Waren darstellen, die wie die zusammengesetzten Waren einzureihen wären: (Position für die zusammengesetzte Ware). Siehe auch Avis 7308 90/2.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2021/956 der Kommission vom 31. Mai 2021 (ABl. EU Nr. L 211/45) (RV L 21/956) Eine modulare Ware mit schallabsorbierenden und schalldämmenden Eigenschaften (sogenanntes Raum-in-Raum-System). Zusammengebaut hat die Ware hat eine Breite von etwa 3 m, eine Länge von 2 bis 6 m und eine Höhe von 2,3 m; die Wände haben eine Dicke von etwa 40 mm. Sie besteht aus einem würfelförmigen Rahmen aus Aluminium, der durch mehrere Metallecken verbunden ist, und aus Paneelen, welche an den Seiten und an der Oberseite der Struktur angebracht sind. Jedes Paneel besteht auf der einen Seite aus einer bedruckten Polyester-Schallschutzschicht aus feuerfestem Gewebe und auf der anderen Seite aus einer beschichteten Spanplatte. Das Innere des Paneels ist mit Steinwolle (Dichte 100 kg/m3) gepolstert. …
Zu Unterposition 7610 9090: Raster aus Aluminium, das aus Gitterelementen mit geschlitzten und lackierten Aluminiumbändern (ca. 13 mm breit) mit einer Wabengröße von ca. 12 X 12 mm, in universeller Plattengröße besteht. Urteil des Bundesfinanzhofs vom 23. Mai 2000 VII R 1/99.
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7610.90.90.92 cover?
Code 7610.90.90.92 covers Products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’). Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7610.90.90.92?
The third-country duty rate for 7610.90.90.92 is 6 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7610.90.90.92?
The first six digits form the HS code: 761090. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7610.90.90.92 have?
7610.90.90.92 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7610.90.90.92 sit in the tariff?
7610.90.90.92 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7610 Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures > 761090 Other > 76109090 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7610.90.90.92?
Yes. The EBTI database holds decisions on 7610.90.90.92, for example FRBTIFR-BTI-2026-04762. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7610.90.90.92 covered by CBAM?
Yes. 7610.90.90.92 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.
Is 7610.90.90.92 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7610.90.90.92 to 0010. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7610.90.90.92 change?
7610.90.90.92 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.