Customs tariff code 8202.99.80: For working other materials
Reference data as at 1 July 2026
Customs tariff code 8202.99.80 covers For working other materials. The third-country duty rate is 2.7 %, plus import VAT.
8202.99.80 is CN code in the EU customs tariff, in chapter 82. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8202.99.80
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 6
Where this code sits in the tariff
From HS code to customs tariff code 8202.99.80
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| San Marino | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Brzeszczoty do pił szablastych wykonane w całości ze stali. Mają podłużny niemal prostokątny kształt, pełny korpus (bez otworów) oraz równomiernie rozmieszczone zęby na całej długości dolnej krawędzi. Przeznaczone do cięcia materiałów izolacyjnych, włóknistych, styropianu, gumy, tektury, skóry czy płyt G/K. Wymiary: 200x19x1,0 mm. Pakowane po 2 szt. w blister z etykietą. Kraj importu: Chiny.
Brzeszczot do pił szablastych wykonany ze stali, wyposażony w zęby z węglików spiekanych. Ma podłużny niemal prostokątny kształt, w jego korpusie znajdują się pięć symetrycznie rozmieszczonych otworów o kształcie zbliżonym do trójkąta. Dolna krawędź robocza jest wyposażona w równomiernie rozmieszczone na całej długości ostre zęby. Brzeszczot przeznaczony do cięcia cegieł, betonu komórkowego, płyt G/K czy płyt cementowych. Wymiary: 455x50x1,5 mm. Kraj importu: Chiny.
Brzeszczoty do pił szablastych wykonane w całości ze stali, wyposażone w ostre, wyprofilowane i szlifowane zęby. Przeznaczone m.in. do cięcia drewna opałowego, paneli drewnianych, drewna konstrukcyjnego, płyt MDF, sklejek oraz tworzyw sztucznych. Stosowane do prac stolarskich, wycinania kształtów, cięcia wzdłużnego czy rozcinania desek. Wymiary: 240x19x1,5 mm. Pakowane po 3 szt. w blister z etykietą. Kraj importu: Chiny.
Brzeszczot do pił szablastych wykonany w całości ze stali. Ma podłużny prostoliniowy kształt oraz równomiernie rozmieszczone zęby na całej długości dolnej krawędzi. Przeznaczony do cięcia miękkich materiałów izolacyjnych. Wymiary: 400x22x1,5 mm. Pakowany w blister z etykietą. Kraj importu: Chiny.
Zestaw brzeszczotów do wyrzynarek. Wykonane są ze stali i przeznaczone są do cięcia miękkiego drewna, płyt wiórowych, stolarskich, pilśniowych, powlekanych i sklejki, o grubości od 1,5 mm do 50 mm. W zestawie znajduje się dziesięć brzeszczotów w sześciu rodzajach – w zależności do jakiego rodzaju i grubości drewna są przeznaczone. Pakowane w blister o wymiarach: 20 cm x 12 cm x 1 cm, masa: 0,11 kg. Następnie pakowane w karton zbiorczy.
Sägeblätter - vollständig aus Stahl bestehende, gerade, längliche, gezahnte Erzeugnisses zum Einbau in von Hand zu führende, elektrisch betriebene Werkzeugmaschinen (nicht Bestandteil dieser vZTA) - mit einer Länge von ca. 100 mm - speziell zum Sägen von Weichholz mit einer Stärke von 5-50 mm - zu jeweils drei Stück auf einem Pappträger aufgemacht Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Sägeblätter aller Art, mit arbeitendem Teil aus unedlem Metall, andere als in den Unterpositionen (KN) 8202 2000 bis 8202 9100 genannte, für die Metallbearbeitung" zur Unterposition 8202 9920 der Kombinierten Nomenklatur (KN).
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören: A) Handsägen zum Sägen von Holz, Metall, Steinen und anderen Stoffen aller Art, für gewerbliche Zwecke oder zur Verwendung in der Hauswirtschaft. Die wichtigsten Arten von Sägen sind: Bügel- oder Bogensägen (mit Rahmen aus Holz oder Metall und Spanner); Sägen der üblichen Art mit Griff (Stichsägen, Rückensägen, Fuchsschwanzsägen usw.); große Sägen (so genannte Zugsägen), die meistens an beiden Enden mit einem Griff versehen sind; messerartige Sägen (auch zusammenklappbar) für Gärtner oder Bergleute; Spezialsägen für Uhrmacher oder Juweliere; Universalsägen oder Sägen mit mehreren Sägeblättern (Nestsägen); Gelenksägen für Zeltlager, militärische Zwecke usw.; Furniersägen; Sägen in Verbindung mit einer Gehrlade, die zusammen ein untrennbares Ganzes bilden, wobei die Säge den Charakter des Werkzeugs bestimmt. …
1. Außer Lötlampen, tragbaren Feldschmieden, Schleifsteine mit Gestell, Zusammenstellungen für die Hand- oder Fußpflege und Waren der Position 8209 erfasst Kapitel 82 nur Waren mit Klinge oder arbeitendem Teil: a) aus unedlem Metall (RV E8201A00); b) aus Metallcarbiden oder aus Cermets (RV E8201B00); c) aus Edelsteinen oder Schmucksteinen (natürlichen, synthetischen oder rekonstituierten), auf einem Träger aus unedlem Metall, Metallcarbid oder Cermet (RV E8201C00); d) aus Schleifstoffen auf einem Träger aus unedlem Metall, sofern es sich um Werkzeuge handelt, deren Zähne, Schneiden oder andere trennende oder schneidende Teile auch nach Aufbringen von Schleifstoffen ihre eigentliche Funktion beibehalten (RV E8201D00). 2. …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8202.99.80 cover?
Code 8202.99.80 covers For working other materials. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8202.99.80?
The third-country duty rate for 8202.99.80 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8202.99.80?
The first six digits form the HS code: 820299. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8202.99.80 have?
8202.99.80 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8202.99.80 sit in the tariff?
8202.99.80 sits in this hierarchy: 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL > 8202 Handsaws; blades for saws of all kinds (including slitting, slotting or toothless saw blades) > 820299 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8202.99.80?
Yes. The EBTI database holds decisions on 8202.99.80, for example PLBTIWIT-2026-000847. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8202.99.80 change?
8202.99.80 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.