Customs tariff code 8207.30.10.10: Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting…
Reference data as at 1 July 2026
Customs tariff code 8207.30.10.10 covers Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles. The third-country duty rate is 2.7 %, plus import VAT.
8207.30.10.10 is TARIC code in the EU customs tariff, in chapter 82. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8207.30.10.10
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 1
Where this code sits in the tariff
- 82TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
- 8207Interchangeable tools for hand tools, whether or not power-operated, or for machine tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools
- 8207.30Tools for pressing, stamping or punching
- 8207.30.10For working metal
- 8207.30.10.10Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles
From HS code to customs tariff code 8207.30.10.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| San Marino | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B005Plant specially designed for the fabrication of "nuclear reactor" fuel elements and specially designed or prepared equipment therefor.
- 1B003Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys, specially designed for the manufacture of any of the following:
- 2B204"Isostatic presses", other than those specified in 2B004 or 2B104, and related equipment, as follows:
- 2B228Rotor fabrication or assembly equipment, rotor straightening equipment, bellows-forming mandrels and dies, as follows:
- 7B103"Production facilities" and "production equipment" as follows:
- 9B009Tooling specially designed for producing gas turbine engine powder metallurgy rotor components having all of the following:
- 9B010Equipment specially designed for the "production" of items specified in 9A012.
- 9B115Specially designed "production equipment" for the systems, sub-systems and components specified in 9A005 to 9A009, 9A011, 9A101, 9A102, 9A105 to 9A109, 9A111, 9A116 to 9A120.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Útiles intercambiables, troqueles, para la estampación en frio de chapas metálicas. Según declaración del solicitantes se instalan en prensas y se utilizan en la fabricación de determinas piezas metálicas que se incorporarán al salpicadero de determinados modelos de vehículos automóviles, reciclándose como chatarra al acabar el periodo de fabricación de estos vehículos. Estos troqueles están fabricados en hierro, se componen de dos partes, superior e inferior, que se acoplan a la prensa y se presentan con diferentes dimensiones y unos pesos comprendidos entre los 1.120 Kg. y los 9.450 Kg. en pallets individuales.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Während zu den vorhergehenden Positionen des Kapitels (abgesehen von einigen Ausnahmen wie z. B. Sägeblätter) hauptsächlich Handwerkzeuge gehören, die im Wesentlichen oder nach Anbringen von Griffen gebrauchsfertig sind, umfasst diese Position dagegen eine große Anzahl von auswechselbaren Werkzeugen, die nicht unmittelbar verwendet werden können, sondern die ihrer Beschaffenheit nach dazu bestimmt sind, fallweise jeweils eingesetzt zu werden in A) mechanische oder nicht mechanische Handwerkzeuge (z. B. Handbohrer, Brustbohrer, Schneidkluppen), B) Werkzeugmaschinen der Pos. 8457 bis 8465 oder in Werkzeugmaschinen, die nach Anmerkung 8 zu Kapitel 84 zu Pos. 8479 gehören, C) Werkzeuge oder Werkzeugmaschinen der Pos. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 1288/91 der Kommission vom 14. Mai 19911)) (RV L 1288/91): 1. Plättchen für auswechselbare Werkzeuge, bestehend aus einer kompakten Schicht Diamanten, die auf einem Träger aus Hartmetall dauerhaft angebracht ist Unterposition 8207 9010 Einreihung gemäß den Allgemeinen Vorschriften 1, 2 a) und 6 für die Auslegung der Kombinierten Nomenklatur sowie dem Wortlaut der KN-Codes 8207, 8207 90 und 8207 9010. Da das Erzeugnis eine Arbeitsoberfläche aus synthetischen Diamanten aufweist, kann es nicht in den KN-Code 8209 eingereiht werden. 1) ABl. EG Nr. L 122/11.
Nationale Entscheidungen und Hinweise (NEH) Steckschlüssel- und Schraubendrehereinsätze, auch maschinenbetätigte, entsprechen der Definition für Schraubenschlüssel und Schraubendreher. Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (467. Sitzung des Ausschusses für den Zollkodex vom 11. bis 13. Februar 2009) Platten in verschiedenen Formen und Größen zur Herstellung von Wendeschneidplatten mit einer Schicht aus polykristallinem kubischen Bor-Nitrid, zum Teil auf einem Träger aus gesintertem Hartmetall aufgebracht, sind in ihrer Rohform nach stofflicher Beschaffenheit einzureihen (Pos. 6909). Wenn die Platten zugeschnitten sind und direkt als Wendeschneidplatten eingesetzt werden können, werden diese Waren in Position 6909 eingereiht, weil die Bedingungen der Anmerkung 1 zu Kapitel 82 nicht erfüllt sind. …
1. Außer Lötlampen, tragbaren Feldschmieden, Schleifsteine mit Gestell, Zusammenstellungen für die Hand- oder Fußpflege und Waren der Position 8209 erfasst Kapitel 82 nur Waren mit Klinge oder arbeitendem Teil: a) aus unedlem Metall (RV E8201A00); b) aus Metallcarbiden oder aus Cermets (RV E8201B00); c) aus Edelsteinen oder Schmucksteinen (natürlichen, synthetischen oder rekonstituierten), auf einem Träger aus unedlem Metall, Metallcarbid oder Cermet (RV E8201C00); d) aus Schleifstoffen auf einem Träger aus unedlem Metall, sofern es sich um Werkzeuge handelt, deren Zähne, Schneiden oder andere trennende oder schneidende Teile auch nach Aufbringen von Schleifstoffen ihre eigentliche Funktion beibehalten (RV E8201D00). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8207.30.10.10 cover?
Code 8207.30.10.10 covers Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8207.30.10.10?
The third-country duty rate for 8207.30.10.10 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8207.30.10.10?
The first six digits form the HS code: 820730. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8207.30.10.10 have?
8207.30.10.10 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8207.30.10.10 sit in the tariff?
8207.30.10.10 sits in this hierarchy: 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL > 8207 Interchangeable tools for hand tools, whether or not power-operated, or for machine tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools > 820730 Tools for pressing, stamping or punching > 82073010 For working metal. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8207.30.10.10?
Yes. The EBTI database holds decisions on 8207.30.10.10, for example ES2015SOL0000000000026. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8207.30.10.10 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8207.30.10.10 to 0B005, 1B003, 2B204, 2B228, 7B103, 9B009, 9B010, 9B115. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8207.30.10.10 change?
8207.30.10.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.