Customs tariff code 8305.10.00.49: Other
Reference data as at 1 July 2026
Customs tariff code 8305.10.00.49 covers Other. The third-country duty rate is 2.7 %, plus import VAT.
8305.10.00.49 is TARIC code in the EU customs tariff, in chapter 83. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8305.10.00.49
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 83MISCELLANEOUS ARTICLES OF BASE METAL
- 8305Fittings for loose-leaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal
- 8305.10Fittings for loose-leaf binders or files
- 8305.10.00Mechaniken für Schnellhefter oder Aktenordner
- 8305.10.00.49Other
From HS code to customs tariff code 8305.10.00.49
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| GSP - General arrangements | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Mechanizm ringowy wykorzystywany do produkcji artykułów szkolnych, biurowych oraz wykorzystywany samodzielnie. Służy do przechowywania dokumentów. Może być zamontowany do podłoża z tektury lub plastiku za pomocą nitów (gotowy wyrób: "segregator"). Wykonany ze stali i tworzywa sztucznego. Posiada cztery półpierścienie (ringi) wykonane z drutu stalowego zamocowane do dwóch podłużnych pasków stalowych umieszczonych w obudowie z tworzywa sztucznego. Cztery półringi mogą być otwierane po naciśnięciu małego plastikowego spustu lub przez ich rozciągnięcie. Na obudowie z tworzywa sztucznego znajduje się marka i logo.
Een mechanisme van onedel metaal voor ringbanden met -volgens opgave- onder meer de volgende kenmerken: - 4 halve ringen van staaldraad; - een behuizing van kunststof; - 2 stalen platen; - met 2 uitsparingen om het mechanisme aan een opbergmap te bevestigen; - de kunststof behuizing is voorzien van een merknaam en een logo; - met afmetingen van ongeveer (L x B x H) 30,5 x 2,5 x 4 cm. De 4 halve ringen kunnen worden geopend hetzij door aan de halve ringen te trekken hetzij door een klein trekkermechanisme te bedienen. Deze BTI vervangt de BTI met het referentienummer NL-RTD-2013-002078 naar aanleiding van de uitspraak op bezwaar met het kenmerk 13/379/10054/143.
MECANISME DE CLASSEUR COMPOSE DE 4 DEMI-ANNEAUX EN FIL D'ACIER, LE TOUT ETANT MAINTENU PAR UNE PLAQUE DE RECOUVREMENT EN PLASTIQUE. LONGUEUR: 285MM.
MECANISME DE CLASSEUR COMPOSE DE 4 DEMI-ANNEAUX EN FIL D'ACIER, LE TOUT ETANT MAINTENU PAR UNE PLAQUE DE RECOUVREMENT EN PLASTIQUE. LONGUEUR: 125MM.
Een samengestelde standaard met veermechanisme voor het ondersteunen van ondermeer ringmappen en bladmuziek, bestaande uit de volgende uiterlijke kenmerken: - een veermechanisme van onedel metaal; - een uitschuifbare papierklem van onedel metaal aan de bovenzijde en een vaste papierklem van onedel metaal aan de onderzijde; - een frame of basis van voorgevormde kunststof; - twee uitklapbare poten van kunststof die kunnen worden verlengd met twee uitschuifbare en verstelbare elementen van onedel metaal en aan het uiteinde voorzien van een uitsparing voor het klemmen van een opbergmap. Het geheel is een universeel mechanisch werkende houder samengesteld uit kunststof en onedel metaal, waarbij het veermechanisme en de kleminrichtingen voor opbergmappen van onedel metaal het wezenlijke karakter bepalen.
MECCANISMO IN METALLO PER LA LEGATURA DI FOGLI, COSTITUITO DA DUE LAME DI FORMA SAGOMATA SULLE QUALI SONO FISSATI TRE SEMIANELLI TENUTI INSIEME DA UNA LAMINA METALLICA ESTERNA,CON SISTEMA DI APERTURA A SCATTO FISSATO AL MECCANISMO. L'ARTICOLO HA UNA LUNGHEZZA DI CIRCA CM.28 E UNA LARGHEZZA DELLA BASE DI CIRCA CM.2.6.
MECCANISMO IN METALLO PER LA LEGATURA DI FOGLI, COSTITUITO DA DUE LAME RETTANGOLARI SULLE QUALI SONO FISSATI DUE SEMIANELLI TENUTI INSIEME DA UNA LAMINA METALLICA ESTERNA,CON SISTEMA DI APERTURA A SCATTO FISSATO AL MECCANISMO. L'ARTICOLO HA UNA LUNGHEZZA DI CIRCA CM.12.3 E UNA LARGHEZZA DELLA BASE DI CIRCA CM.1.7.
MECCANISMO IN METALLO PER LA LEGATURA DI FOGLI, COSTITUITO DA DUE LAME DI FORMA SAGOMATA SULLE QUALI SONO FISSATI QUATTRO SEMIANELLI TENUTI INSIEME DA UNA LAMINA METALLICA ESTERNA,CON SISTEMA DI APERTURA A SCATTO FISSATO AL MECCANISMO. L'ARTICOLO HA UNA LUNGHEZZA DI CIRCA CM.15.2 E UNA LARGHEZZA DELLA BASE DI CIRCA CM.1.9.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Mechaniken (z. B. mit Klemme, Zug, Hebel, Feder, Ringen, Schrauben) für Schnellhefter oder Aktenordner, Beschläge und dergleichen für Register wie z. B. Verstärkungsecken und -ringe sowie alle kleinen Gegenstände, die im Büro zum Zusammenklammern, Aufspießen oder Kennzeichnen von Papieren verwendet werden. Dazu gehören u. a. Musterklammern, Briefklammern, Heftecken, Karteireiter, Zettelhaken und -spieße und Heftklammern, zusammenhängend in Streifen, der Art, wie sie in Heftmaschinen oder -zangen z. B. für Bürozwecke, zur Dekoration oder zum Verpacken verwendet werden. Nicht zu dieser Position gehören: a) Reißnägel (insbesondere Pos. 7317 oder 7415). b) Verschlüsse für Bücher oder Register, mit oder ohne Schlüssel (Pos. 8301 oder 8308).
Nationale Entscheidungen und Hinweise (NEH) Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (48. Sitzung des Ausschusses für den Zollkodex vom 24. bis 26. November 2010): Waren in Form von Bestandteilen eines Aktenordners des KN Codes 4820 30 00, die in einer Warensendung in gleicher Anzahl und zur selben Zeit zur Zollabfertigung gestellt werden. Die Bestandteile sind: - eine sog. …
1. Teile aus unedlen Metallen von Waren des Kapitels 83 werden wie die entsprechenden Waren eingereiht. Jedoch gelten Waren aus Eisen oder Stahl der Position 7312, 7315, 7317, 7318 oder 7320 sowie die gleichen Waren aus anderen unedlen Metallen (Kapitel 74 bis 76 und 78 bis 81) nicht als Teile von Waren des Kapitels 83 (RV E8301000). 2. Als „Laufrädchen oder -rollen" im Sinne der Position 8302 gelten solche mit einem Durchmesser (auch mit aufgebrachter Lauffläche) von 75 mm oder weniger oder solche mit einem Durchmesser (auch mit aufgebrachter Lauffläche) von mehr als 75 mm und einer Radbreite oder einer Breite der aufgebrachten Lauffläche von weniger als 30 mm (RV E8302000).
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8305.10.00.49 cover?
Code 8305.10.00.49 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8305.10.00.49?
The third-country duty rate for 8305.10.00.49 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8305.10.00.49?
The first six digits form the HS code: 830510. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8305.10.00.49 have?
8305.10.00.49 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8305.10.00.49 sit in the tariff?
8305.10.00.49 sits in this hierarchy: 83 MISCELLANEOUS ARTICLES OF BASE METAL > 8305 Fittings for loose-leaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal > 830510 Fittings for loose-leaf binders or files > 83051000 Mechaniken für Schnellhefter oder Aktenordner. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8305.10.00.49?
Yes. The EBTI database holds decisions on 8305.10.00.49, for example PLPL-WIT-2014-00592. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8305.10.00.49 change?
8305.10.00.49 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.