Customs tariff code 8411.91.00.90: Other
Reference data as at 1 July 2026
Customs tariff code 8411.91.00.90 covers Other. The third-country duty rate is 2.7 %, plus import VAT.
8411.91.00.90 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8411.91.00.90
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8411Turbojets, turbopropellers and other gas turbines
- 8411.91Of turbojets or turbopropellers
- 8411.91.00Teile, von Turbo-Strahltriebwerken oder Turbo-Propellertriebwerken
- 8411.91.00.90Other
From HS code to customs tariff code 8411.91.00.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 9A003Specially designed assemblies or components, incorporating any of the "technologies" specified in 9E003.a., 9E003.h. 9E003.i., or 9E003.k, for any of the following aero gas turbine engines:
- 9A102'Turboprop engine systems' specially designed for unmanned aerial vehicles specified in 9A012 or 9A112.a., and specially designed components therefor, having a 'maximum power' greater than 10 kW.
- 9A002'Marine gas turbine engines' designed to use liquid fuel and having all of the following, and specially designed assemblies and components therefor:
- 9A003Specially designed assemblies or components, incorporating any of the "technologies" specified in 9E003.a., 9E003.h. 9E003.i., or 9E003.k, for any of the following aero gas turbine engines:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
sugárhajtású gázturbina alkatrésze
Pieza destinada la elaboración de la turbina del turborreactor o urbopropulsor de una aeronave civil, de niquel aleado. Dicha pieza, desde el punto de vista del proceso productivo, tiene la consideración de producto intermedio ya que pese a tener la geometría del producto final, todavía son necesarias una serie de operaciones como puede ser mecanizado, pulido y aluminizado, para ser considerada como producto terminado. El contenido total de elementos distintos del niquel y del cobalto es superior al 1 % en peso.
TUBE ASSEMBLY AMS5581 INCONEL 625 CORROSION AND HEAT RESISTANT NICKEL ALLOY SEAMLESS TUBE, MADE TO MEASURE FOR SPECIFIC USE IN AIRCRAFT ENGINE TRENT 700
A PART DESIGNED SPECIFICALLY FOR TURBOJET AIRCRAFT. THE PART IS A STAINLESS STEEL STRAIGHT CONNECTOR MADE FROM CORROSION RESISTING STAINLESS STEEL. .
TUBE ASSEMBLY FUEL 21- AMS5570 STAINLESS STEEL CORROSION AND HEAT RESISTANT SEAMLESS TUBE MADE TO MEASURE AND DESIGN SPECIFIC FOR AIRCRAFT ENGINE TRENT XWB
TUBE ASSEMBLY, AIR LINE AMS5570 STAINLESS STEEL CORROSION AND HEAT-RESISTANT SEAMLESS TUBE. MADE TO MEASURE FOR AIRCRAFT ENGINE BR710
THE ASSEMBLY IS OF SEAMLESS COLD DRAWN CONCENTRIC HOLLOW RIGID TUBE MADE OF AMS5557 CORROSION AND HEAT RESISTANT STEEL, MEASURING 41.7 INCHES. IT IS USED AS A FUEL/LUBRICANT/AIR SUPPLY PIPELINE TO THE GAS TURBINE ENGINE. 7 BENDS FORMED TO PRECISE ANGLES AT PRECISE POSITIONS ALONG ITS LENGTH TO VERY TIGHT TOLERANCES. TO THE OUTSIDE OF THIS SHAPED TUBE 6 OFF WEAR SLEEVES MADE OF AMS5557/AMS5510 CRS STEEL ARE BRAZED INTO SPECIFIC POSITIONS WITH BRAZE MATERIAL AMS4772 AND FLUX TO AMS2275. AT EACH END OF THE TUBE ASSEMBLY, TUBE FERRULE REDUCERS MADE OF AMS5645 CRS STEEL ARE WELDED INTO POSITION. THEN THE TUBE NUT COUPLINGS MADE OF AMS5645/5646 CRS STEEL ARE FITTED FOR ATTACHING THE ASSEMBLY TO THE AIRCRAFT ENGINE.
3/4 TUBE ASSEMBLY OLIV 23 AMS5570 STAINLESS STEEL CORROSION AND HEAT RESISTANT SEAMLESS TUBE ASSEMBLY FOR OIL FOR AIRCRAFT ENGINE - MADE TO MEASUREMENT AND DESIGN FOR SPECIFIC USE IN AIRCRAFT ENGINE TRENT XWB
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 1035/2014 der Kommission vom 25. September 2014 (ABl. EU Nr. L 287/3) (RV L 1035/14): 1. Ein Turbinenrad aus einer Nickel-Basis-Legierung mit radial angeordneten Schaufeln und zentrischer Nabe zum Aufsatz auf den Wellenverband in einem Abgasturbolader. Das Rad ist derjenige Bestandteil einer Turbine, der die Energie des einströmenden Motorenabgases in eine Drehbewegung zum Antrieb des Verdichterrads des Turboladers umwandelt. Siehe Abbildung 1 Unterposition 8411 99 00 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 2b zu Abschnitt XVI und dem Wortlaut der KN-Positionen 8411 und 8411 99 00. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8411.91.00.90 cover?
Code 8411.91.00.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8411.91.00.90?
The third-country duty rate for 8411.91.00.90 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8411.91.00.90?
The first six digits form the HS code: 841191. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8411.91.00.90 have?
8411.91.00.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8411.91.00.90 sit in the tariff?
8411.91.00.90 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8411 Turbojets, turbopropellers and other gas turbines > 841191 Of turbojets or turbopropellers > 84119100 Teile, von Turbo-Strahltriebwerken oder Turbo-Propellertriebwerken. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8411.91.00.90?
Yes. The EBTI database holds decisions on 8411.91.00.90, for example HUBTIT206490545301. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8411.91.00.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8411.91.00.90 to 9A003, 9A102, 9A002, 9A003. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8411.91.00.90 change?
8411.91.00.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.