Customs tariff code 8413.70.51: Other centrifugal pumps, andere, mit einer Nennweite des Austrittsstutzens von, mehr…
Reference data as at 1 July 2026
Customs tariff code 8413.70.51 covers Other centrifugal pumps, andere, mit einer Nennweite des Austrittsstutzens von, mehr als 15 mm, Radialkreiselpumpen, einstufig, einströmig, in Blockbauweise. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
8413.70.51 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8413.70.51
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8413Pumps for liquids, whether or not fitted with a measuring device; liquid elevators
- 8413.70Other centrifugal pumps
- 8413.70.51Other centrifugal pumps, andere, mit einer Nennweite des Austrittsstutzens von, mehr als 15 mm, Radialkreiselpumpen, einstufig, einströmig, in Blockbauweise
From HS code to customs tariff code 8413.70.51
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Mercosur | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 2B350iChemical manufacturing facilities, equipment and components, as follows:
- 2B350iChemical manufacturing facilities, equipment and components, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Pompe centrifuge, à roue radiale, monocellulaire, à simple flux, monobloc et compacte en acier inoxydable destinée à une brasserie dont le tube de refoulement mesure 40mm.
Kreiselpumpe, - aus einem spezifischen Pumpengehäuse mit Gehäusedeckel und integriertem Vorfilter, einem axial angetriebenen Laufrad und Gleitringdichtung, radialer Abströmrichtung, über eine Welle durch einen Asynchronmotor angetrieben, in Blockbauweise, einstufig und einströmig (Abbildung siehe Anlage), - mit einer Nennweite des Austrittsstutzens von mehr als 15 mm (40-50 mm), - zur Umwälzung von Schwimmbadwasser in Filteranlagen bestimmt, ausschließlich zum Betrieb außerhalb des Wassers bestimmt. "Flüssigkeitspumpe, andere Kreiselpumpe, keine Tauchmotorpumpe, kein Umlaufbeschleuniger, mit einer Nennweite des Austrittsstutzens von mehr als 15 mm, keine Kanalradpumpe und Seiten- kanalpumpe, Radialkreiselpumpe - sog. Kreiselpumpe"
Kreiselpumpe, - aus einem spezifischen, annähernd zyinderförmigen Gehäuse mit einem mittels der Welle von einem Asynchronmotor axial angetriebenen Laufrad mit radialer Abströmrichtung, Gleit- ringdichtung, einstufig, einströmig, in Blockbauweise (Abbildung siehe Anlage), - mit einer Nennweite des Austrittsstutzens von mehr als 15 mm (63 mm), - zur Aufstellung ausschließlich außerhalb des Wassers bestimmt, - zum Fördern von Flüssigkeiten, zum Betrieb von Schwimmbädern mit Massagedüsen oder Whirlpools. "Flüssigkeitspumpe, andere Kreiselpumpe, andere als Tauchmotorpumpe oder Umlauf- beschleuniger für Heizungs- und Heißwasseranlagen, mit einer Nennweite des Austritts- stutzens von mehr als 15 mm, Radialkreiselpumpe - sog. Kreiselpumpe"
Kreiselpumpe, - aus einem spezifischen Pumpengehäuse mit Gehäusedeckel und integriertem Vorfilter, einem axial angetriebenen Laufrad und Gleitringdichtung, mit radialer Abströmrichtung, über eine Welle durch einen Asynchronmotor angetrieben, in Blockbauweise, einstufig und einströmig (Abbildung siehe Anlage), - mit einer Nennweite des Austrittsstutzens von mehr als 15 mm (110 mm), - zur Umwälzung von Schwimmbadwasser in Filteranlagen bestimmt, ausschließlich zum Betrieb außerhalb des Wassers bestimmt. "Flüssigkeitspumpe, andere Kreiselpumpe, keine Tauchmotorpumpe, kein Umlaufbeschleuniger, mit einer Nennweite des Austrittsstutzens von mehr als 15 mm, keine Kanalradpumpe und Seiten- kanalpumpe, Radialkreiselpumpe - sog. Kreiselpumpe"
Kreiselpumpe, - aus einem spezifischen Pumpengehäuse mit Gehäusedeckel, einem axial angetriebenen Laufrad mit Gleitringdichtung und radialer Abströmungsrichtung, über eine Welle durch einen Asynchron- motor angetrieben, in Blockbauweise, einstufig und einströmig (Abbildung siehe Anlage), - mit einer Nennweite des Austrittsstutzens von mehr als 15 mm (50-110 mm), - ausschließlich zur Aufstellung außerhalb des Wassers bestimmt, - zur Umwälzung von Schwimmbadwasser in Filteranlagen. "Flüssigkeitspumpe, andere Kreiselpumpe, keine Tauchmotorpumpe, kein Umlaufbeschleuniger, mit einer Nennweite des Austrittsstutzens von mehr als 15 mm, keine Kanalradpumpe und Seiten- kanalpumpe, Radialkreiselpumpe - sog. Kreiselpumpe"
Kreiselpumpe, - aus einem spezifischen Pumpengehäuse mit Gehäusedeckel und integriertem Vorfilter, einem axial angetriebenen Laufrad und Gleitringdichtung, mit radialer Abströmrichtung, über eine Welle durch einen Asynchronmotor angetrieben, in unterschiedlichen Aus- führungen, jeweils in Blockbauweise, einstufig und einströmig (Abbildung siehe Anlage), - mit einer Nennweite des Austrittsstutzens von mehr als 15 mm (50-63 mm), - zur Umwälzung von Schwimmbadwasser in Filteranlagen bestimmt, ausschließlich zum Betrieb außerhalb des Wassers bestimmt. "Flüssigkeitspumpe, andere Kreiselpumpe, keine Tauchmotorpumpe, kein Umlaufbeschleuniger, mit einer Nennweite des Austrittsstutzens von mehr als 15 mm, keine Kanalradpumpe und Seiten- kanalpumpe, Radialkreiselpumpe - sog. Kreiselpumpe"
Pompy odśrodkowe wysokiego podnoszenia do cieczy, o średnicy wylotu (zależnie od modelu) od 50 do 80 mm, o przepływie promieniowym, jednostopniowe, z wirnikiem jednostronnym, napędzane silnikiem benzynowym o pojemności (zależnie od modelu) od 163 do 196 cm3, zblokowanym z pompą. Maksymalna wydajność pompy (zależnie od modelu) od 36 do 78 m3/h. Przeznaczone do przepompowywania wody czystej.
Motopompa chemiczna odśrodkowa do cieczy, o średnicy wylotu 50 mm, o przepływie promieniowym, jednostopniowe, z wirnikiem jednostronnym, napędzane silnikiem benzynowym o pojemności 163 cm3, zblokowanym z pompą. Maksymalna wydajność pompy 35 m3/h. Przeznaczone do przepompowywania wody czystej lub o niskim stopniu zanieczyszczenia.
Notes that govern this classification
Zu Unterpositionen 8413 70 51 bis 8413 70 75: Bei Radialkreiselpumpen erfolgt die Förderung der Flüssigkeit quer zur Achse des Förderrades.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 1038/2014 der Kommission vom 25. September 2014 (ABl. EU Nr. L 287/14) (RV L 1038/14): 4. Eine von Hand zu betätigende Inflationsvorrichtung aus hochfestem Polycarbonat, mit einem Manometer und einer Volumenskala ausgestattet. Sie verfügt über einen Hochdruckschlauchanschluss (Luer) und erzielt eine präzise regelbare Pumpleistung von bis zu 20 Atmosphären (atm). Das Gerät wird in medizinischen Bereichen zur Inflation und Deflation von Ballonkathetern verwendet. Das Manometer dient zur Überwachung des Drucks im Inneren des Ballonkatheters bei der Inflation, der Deflation und während des chirurgischen Eingriffs. …
Gerichtliche Entscheidungen (GE) - national Beschluss des Bundesfinanzhofs vom 25. Oktober 2012 in der Rechtsache VII B 63/12 zu der zolltariflichen Einreihung von Ernährungspumpen: Leitsatz NV: Pumpen für Sondennahrung, sog. Ernährungspumpen, sind in die Unterpos. 8413 19 00 KN einzureihen (Rn.7). Orientierungssatz 1. NV: Eine andere tarifliche Einreihung käme auch dann nicht in Betracht, wenn man die Pumpe als Teil eines Apparats zur enteralen Ernährung ansähe. Auch dann, wenn geltend gemacht wird, die streitige Pumpe sei auch als medizinischer Apparat i. S. der Pos. 9018 KN anzusehen, wäre der Einreihung in die Pos. 8413 KN der Vorzug zu geben (Rn.7) (Rn.8).
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
- 8413.70.51.10For use in civil aircraft
- 8413.70.51.20Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with: -a discharge outlet diameter of 20 mm or more, -9 slots stator, -6 pole rotor, -rated power of 95 W, -volute with straight outlet, -rotor chamber without sand filter
- 8413.70.51.30Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with: -a discharge outlet diameter of 20 mm or more, -9 slots stator, -6 pole rotor, -rated power of 95 W, -volute with clamped rubber hose outlet, -rotor chamber without sand filter
- 8413.70.51.40Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft, monobloc with the motor, volute with integrated heater, with: -a discharge outlet diameter of 20 mm or more, -9 slots square or chain pole stator, -6 pole rotor, -ferritic or rare earth magnets, -rated power of 95 W or 80 W, -heater of nominal power of 1800 W and soldered or laser welded safety, devices, -volute with or without clamped rubber outlet, -rotor chamber with ultrasonic welded sand filter
- 8413.70.51.90Other
Frequently asked questions
What does customs tariff code 8413.70.51 cover?
Code 8413.70.51 covers Other centrifugal pumps, andere, mit einer Nennweite des Austrittsstutzens von, mehr als 15 mm, Radialkreiselpumpen, einstufig, einströmig, in Blockbauweise. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8413.70.51?
TARIC holds no third-country rate of its own for 8413.70.51. The rate follows from the declarable commodity code beneath it.
What is the HS code for 8413.70.51?
The first six digits form the HS code: 841370. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8413.70.51 have?
8413.70.51 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8413.70.51 sit in the tariff?
8413.70.51 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8413 Pumps for liquids, whether or not fitted with a measuring device; liquid elevators > 841370 Other centrifugal pumps. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8413.70.51?
Yes. The EBTI database holds decisions on 8413.70.51, for example FRBTIFR-BTI-2022-06500. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8413.70.51 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8413.70.51 to 2B350i, 2B350i. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8413.70.51 change?
8413.70.51 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.