Customs tariff code 8414.80.73.30: Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon…
Reference data as at 1 July 2026
Customs tariff code 8414.80.73.30 covers Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: - driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors, - with a nominal power rating of not more than 1,5kW, - a rated voltage of 100V or more but not more than 240V, - with a height of not more than 300mm, - an external diameter of not more than 150mm, - with a unit weight of not more than 15kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers. The third-country duty rate is 2.2 %, plus import VAT.
8414.80.73.30 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8414.80.73.30
- Third-country duty
- 2.2 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8414Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters
- 8414.80Other
- 8414.80.73Single-shaft
- 8414.80.73.30Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: - driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors, - with a nominal power rating of not more than 1,5kW, - a rated voltage of 100V or more but not more than 240V, - with a height of not more than 300mm, - an external diameter of not more than 150mm, - with a unit weight of not more than 15kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers
From HS code to customs tariff code 8414.80.73.30
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B001cPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 0B001dPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 0B001hPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 0B004bPlant for the production or concentration of heavy water, deuterium and deuterium compounds and specially designed or prepared equipment and components therefor, as follows:
- 2B233Bellows-sealed scroll-type compressors and bellows-sealed scroll-type vacuum pumps having all of the following:
- 2B233Bellows-sealed scroll-type compressors and bellows-sealed scroll-type vacuum pumps having all of the following:
- 8A002Marine systems, equipment and components, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Jednowałowa hermetyczna sprężarka obrotowa przeznaczona do napełnienia czynnikiem węglowodorowym (R290 – propan), po zmontowaniu kompletnego układu. Czynnik chłodniczy jest sprężany w pompie ciepła poprzez ruch obrotowy (mimośrodowy) tłoka w cylindrze. Wyrób napędzany jest przez jednofazowe silniki prądu przemiennego typu „on-off” lub „bezszczotkowe prądu stałego” o zmiennej prędkości, o mocy znamionowej nie większej niż 1,5 kW, o napięciu znamionowym 100 V lub większym, ale nie większym niż 240V. Wyrób ma wysokość około 260 mm, bryła wyrobu w najszerszych punktach wpisuje się w okrąg o średnicy nie większej niż 150 mm, przybliżona masa wyrobu wynosi 8,2 kg. Sprężarka jest przeznaczona do produkcji pomp ciepła, wykorzystywanych w suszarkach do odzieży, stosowanych w gospodarstwach domowych (nie stanowi części zamiennej). Wyrób pakowany jest w karton oraz folię, następnie zbiorczo umieszczany na paletach.
Hermetyczna sprężarka obrotowa bez zawartości czynnika chłodniczego. Przeznaczona do wodorofluorowęglowodorowych (HFC) lub węglowodorowych czynników chłodniczych, napędzana przez jednofazowe silniki prądu przemiennego typu „on-off” lub bezszczotkowe prądu stałego, o zmiennej prędkości, mocy znamionowej nie większej niż 1,5 kW, napięciu znamionowym 100V lub większym, ale nie większym niż 240V, wysokości nie większej niż 300 mm, średnicy zewnętrznej nie większej niż 150 mm, masie jednostkowej nie większej niż 15 kg. Sprężarka jest przeznaczona do produkcji pomp ciepła, wykorzystywanych w suszarkach do odzieży stosowanych w gospodarstwach domowych. Decyzja wydana powtórnie w miejsce WIT numer PL-WIT-2014-00858.
Hermetyczna sprężarka obrotowa, z fluorowęglowodorowym czynnikiem chłodniczym R134a, napędzana przez jednofazowe silniki prądu przemiennego typu "on-of" lub bezszczotkowe silniki prądu stałego o zmiennej prędkości, o mocy znamionowej nie większej niż 1,5 kW. Urządzenie jest umieszczone w hermetycznej cylindrycznej obudowie o średnicy od 90 mm do 130 mm i wysokości około 20 cm, posiada przyłącza do instalacji obiegowej czynnika chłodniczego oraz do instalacji elektrycznej. Sprężarka jest zasilana napięciem 220-240 V / 50 Hz i przeznaczona do produkcji pomp ciepła wykorzystywanych w suszarkach ubrań, które są stosowane w gospodarstwach domowych.
Hermetycznie zamknięta, jadnowałowa sprężarka obrotowa (rotacyna), z czynnikiem fluorowęglowodorowym (grupa HFC) R134a, napędzana przez bezszczotkowy silnik prądu stałego o zmiennej prędkości, o mocy znamionowej 505 W. Urządzenie jest umieszczone w hermetycznej cylindrycznej obudowie o średnicy około 10 cm i wysokości około 20 cm, posiada przyłącza do instalacji obiegowej czynnika chłodniczego oraz do instalacji elektrycznej. Sprężarka jest zasilana napięciem 220-240 V / 50 Hz i przeznaczona do produkcji pomp ciepła wykorzystywanych w suszarkach ubrań, które są stosowane w gospodarstwach domowych.
Hermetycznie zamknięta, jadnowałowa sprężarka obrotowa (rotacyna), z czynnikiem fluorowęglowodorowym (grupa HFC) R407c, napędzana przez jednofazowy silnik prądu przemiennego typu "on-off", o mocy znamionowej 460 W. Urządzenie jest umieszczone w hermetycznej cylindrycznej obudowie o średnicy około 10 cm i wysokości około 20 cm, posiada przyłącza do instalacji obiegowej czynnika chłodniczego oraz do instalacji elektrycznej. Sprężarka jest zasilana napięciem 220-240 V / 50 Hz i przeznaczona do produkcji pomp ciepła wykorzystywanych w suszarkach ubrań, które są stosowane w gospodarstwach domowych.
Hermetycznie zamknięta, jadnowałowa sprężarka obrotowa (rotacyna), z czynnikiem fluorowęglowodorowym (grupa HFC) R134a, napędzana przez jednofazowy silnik prądu przemiennego typu "on-off", o mocy znamionowej 455 W. Urządzenie jest umieszczone w hermetycznej cylindrycznej obudowie o średnicy około 10 cm i wysokości około 20 cm, posiada przyłącza do instalacji obiegowej czynnika chłodniczego oraz do instalacji elektrycznej. Sprężarka jest zasilana napięciem 220-240 V / 50 Hz i przeznaczona do produkcji pomp ciepła wykorzystywanych w suszarkach ubrań, które są stosowane w gospodarstwach domowych.
Sprężarka wyporowa, jednowałowa, rotacyjna, przeznaczona do fluorowęglowodorowych czynników chłodniczych (przystosowana do pracy na współczynniku chłodzącym R134a), napędzana przez jednofazowe silniki prądu przemiennego typu "on-off" lub bezszczotkowe prądu stałego, o zmiennej prędkości, o mocy znamionowej do 1,5 KW, zasilana napięciem przemiennym (220-240V / 50Hz). Urządzenie jest umieszczone w hermetycznej cylindrycznej obudowie o średnicy od 90 d 130 mm, posiada przyłącza do instalacji obiegowej czynnika chłodniczego oraz do instalacji elektrycznej. Sprężarka jest przeznaczona do produkcji pomp ciepła, wykorzystywanych w suszarkach do ubrań, które są stosowane w gospodarstwach domowych.
Sprężarka wyporowa, jednowałowa, rotacyjna, przeznaczona do fluorowęglowodorowych czynników chłodniczych, napędzana przez jednofazowe silniki prądu przemiennego typu "on-off" lub bezszczotkowe prądu stałego, o zmiennej prędkości, o mocy znamionowej do 1,5 KW, zasilane napięciem przemiennym (220-240V / 50Hz). Urządzenie jest umieszczone w hermetycznej cylindrycznej obudowie o średnicy od 90 d 110 mm, posiada przyłącza do instalacji obiegowej czynnika chłodniczego oraz do instalacji elektrycznej. Sprężarka jest przeznaczona do produkcji pomp ciepła, wykorzystywanych w suszarkach do ubrań, które są stosowane w gospodarstwach domowych.
Notes that govern this classification
Zu Unterposition 8414 60 oder 8414 80: 1. Schrank mit wirbelfreier Luftströmung, der zum Herstellen und Handhaben von Zellkulturen in Laboratorien usw. verwendet wird und aus einem Metallgehäuse besteht, in dem sich befinden: 1) eine Umlufthaube mit eingebautem elektrischen Ventilator und einem Filter zum Reinigen der Luft; 2) eine unterhalb der Haube angebrachte, gelochte Platte, die als Arbeitsfläche dient; 3) ein unter der gelochten Platte befindlicher Behälter zum Auffangen jeglicher verschütteter Flüssigkeiten. Der Schrank ist vorne offen und zum Aufstellen auf einen Arbeitstisch konstruiert. Die Haube stellt einen wirbelfreien Luftstrom her, der an der offenen Schrankseite eine Schutzbarriere erzeugt, um das Bedienungspersonal von jeder möglichen Kontaminierung während des Handhabens von biologischen Stoffen abzuschirmen. Zu Unterposition 8414 80: 1. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 43/2013 der Kommission vom 17. Januar 2013 (ABl. EU Nr. L 18/5) (RV L 43/13) Eine elektrische Vakuum-Milchpumpe bestehend aus: - einem Gehäuse mit einer integrierten Pumpe, die durch einen Elektromotor angetrieben wird, einer Batterie und Bedienelementen zum Einstellen der Saugstärke und des Saugrhythmus, - einer Absaughaube mit einem trichterförmigen Saugansatz, - einem Anschlussstück aus Kunststoff zum Anschließen einer Milchflasche. Die Pumpe erzeugt in rhythmischen Abständen ein Vakuum um die weibliche Brust, um die Muttermilch abzusaugen. Unterposition 8414 10 89 Die Einreihung erfolgt gemäß den Allgemeinen Vorschriften für die Auslegung der Kombinierten Nomenklatur 1 und 6 sowie nach dem Wortlaut der KN-Positionen 8414, 8414 10 und 8414 10 89. …
Nationale Entscheidungen und Hinweise (NEH) Der Ausschuss für den Zollkodex - Fachbereich zolltarifliche und statistische Nomenklatur (Bereich Mechanik/Verschiedenes) hat im Rahmen seiner 37. Sitzung zur Einreihung von sog. Minikompressoren wie folgt Stellung genommen: 1. Ein sog. Minikompressor bestehend aus: - einem elektrischen Motor, einem Kühlgebläse (Ventilator) und einer Pumpe in Form eines Kolbens in einem Gehäuse aus Kunststoff, mit den Maßen von etwa 17 x 16 x 7 cm, mit einem An/Aus-Schalter, einem Druckmessgerät und einem Schnappverschluss für eine Flasche mit Dichtungsmittel, - einem Schlauch mit einem Stutzen mit Gewinde am Ende und - einem elektrischen Kabel mit Krokodilklemmen zur Verbindung mit einem Akkumulator. Die Ware arbeitet bei einer Spannung von 12 V und erzeugt einen Überdruck zwischen 0 und 8 bar. Sie bietet eine Liefermenge von 60 m³ oder weniger je Stunde. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8414.80.73.30 cover?
Code 8414.80.73.30 covers Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: - driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors, - with a nominal power rating of not more than 1,5kW, - a rated voltage of 100V or more but not more than 240V, - with a height of not more than 300mm, - an external diameter of not more than 150mm, - with a unit weight of not more than 15kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8414.80.73.30?
The third-country duty rate for 8414.80.73.30 is 2.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8414.80.73.30?
The first six digits form the HS code: 841480. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8414.80.73.30 have?
8414.80.73.30 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8414.80.73.30 sit in the tariff?
8414.80.73.30 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8414 Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters > 841480 Other > 84148073 Single-shaft. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8414.80.73.30?
Yes. The EBTI database holds decisions on 8414.80.73.30, for example PLBTIWIT-2025-001334. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8414.80.73.30 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8414.80.73.30 to 0B001c, 0B001d, 0B001h, 0B004b, 2B233, 2B233, 8A002. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8414.80.73.30 change?
8414.80.73.30 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.