Customs tariff code 8414.90.00.55: Air conditioning compressor housing component made of aluminum alloy for installation…
Reference data as at 1 July 2026
Customs tariff code 8414.90.00.55 covers Air conditioning compressor housing component made of aluminum alloy for installation in electric air conditioning compressors for motor vehicles: -with a width of 100 mm or more but not more than 220 mm, -with a length of 100 mm or more but not more than 230 mm, -with a height of 80 mm or more but not more than 180 mm, -with one single central bore, -machined by CNC milling or unwrought, -whether or not impregnated, -with one suction port or without. The third-country duty rate is 2.2 %, plus import VAT.
8414.90.00.55 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8414.90.00.55
- Third-country duty
- 2.2 %
- Declarable
- No
- Binding rulings
- 0
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8414Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters
- 8414.90Parts
- 8414.90.00Teile
- 8414.90.00.55Air conditioning compressor housing component made of aluminum alloy for installation in electric air conditioning compressors for motor vehicles: -with a width of 100 mm or more but not more than 220 mm, -with a length of 100 mm or more but not more than 230 mm, -with a height of 80 mm or more but not more than 180 mm, -with one single central bore, -machined by CNC milling or unwrought, -whether or not impregnated, -with one suction port or without
From HS code to customs tariff code 8414.90.00.55
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B001bPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 0B001cPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 0B004bPlant for the production or concentration of heavy water, deuterium and deuterium compounds and specially designed or prepared equipment and components therefor, as follows:
- 2B350iChemical manufacturing facilities, equipment and components, as follows:
- 3A504Cryogenic cooling systems and components, as follows:
- 0B001Plant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 0B004Plant for the production or concentration of heavy water, deuterium and deuterium compounds and specially designed or prepared equipment and components therefor, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Zu Unterpositionen 8414 90 00: Hierher gehören auch Teile von Abgasturboladern für Kolbenverbrennungsmotoren. Dagegen sind Teile der mit dem Abgasturbolader verwendeten Abgasturbine als Teile einer Gasturbine ohne Brennkammer der Pos. 8411 zuzuordnen.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 43/2013 der Kommission vom 17. Januar 2013 (ABl. EU Nr. L 18/5) (RV L 43/13) Eine elektrische Vakuum-Milchpumpe bestehend aus: - einem Gehäuse mit einer integrierten Pumpe, die durch einen Elektromotor angetrieben wird, einer Batterie und Bedienelementen zum Einstellen der Saugstärke und des Saugrhythmus, - einer Absaughaube mit einem trichterförmigen Saugansatz, - einem Anschlussstück aus Kunststoff zum Anschließen einer Milchflasche. Die Pumpe erzeugt in rhythmischen Abständen ein Vakuum um die weibliche Brust, um die Muttermilch abzusaugen. Unterposition 8414 10 89 Die Einreihung erfolgt gemäß den Allgemeinen Vorschriften für die Auslegung der Kombinierten Nomenklatur 1 und 6 sowie nach dem Wortlaut der KN-Positionen 8414, 8414 10 und 8414 10 89. …
Nationale Entscheidungen und Hinweise (NEH) Der Ausschuss für den Zollkodex - Fachbereich zolltarifliche und statistische Nomenklatur (Bereich Mechanik/Verschiedenes) hat im Rahmen seiner 37. Sitzung zur Einreihung von sog. Minikompressoren wie folgt Stellung genommen: 1. Ein sog. Minikompressor bestehend aus: - einem elektrischen Motor, einem Kühlgebläse (Ventilator) und einer Pumpe in Form eines Kolbens in einem Gehäuse aus Kunststoff, mit den Maßen von etwa 17 x 16 x 7 cm, mit einem An/Aus-Schalter, einem Druckmessgerät und einem Schnappverschluss für eine Flasche mit Dichtungsmittel, - einem Schlauch mit einem Stutzen mit Gewinde am Ende und - einem elektrischen Kabel mit Krokodilklemmen zur Verbindung mit einem Akkumulator. Die Ware arbeitet bei einer Spannung von 12 V und erzeugt einen Überdruck zwischen 0 und 8 bar. Sie bietet eine Liefermenge von 60 m³ oder weniger je Stunde. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8414.90.00.55 cover?
Code 8414.90.00.55 covers Air conditioning compressor housing component made of aluminum alloy for installation in electric air conditioning compressors for motor vehicles: -with a width of 100 mm or more but not more than 220 mm, -with a length of 100 mm or more but not more than 230 mm, -with a height of 80 mm or more but not more than 180 mm, -with one single central bore, -machined by CNC milling or unwrought, -whether or not impregnated, -with one suction port or without. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8414.90.00.55?
The third-country duty rate for 8414.90.00.55 is 2.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8414.90.00.55?
The first six digits form the HS code: 841490. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8414.90.00.55 have?
8414.90.00.55 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8414.90.00.55 sit in the tariff?
8414.90.00.55 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8414 Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters > 841490 Parts > 84149000 Teile. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8414.90.00.55?
The EBTI database currently holds no valid decisions on 8414.90.00.55. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8414.90.00.55 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8414.90.00.55 to 0B001b, 0B001c, 0B004b, 2B350i, 3A504, 0B001, 0B004. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8414.90.00.55 change?
8414.90.00.55 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.