Customs tariff code 8415.90.00: Teile
Reference data as at 1 July 2026
Customs tariff code 8415.90.00 covers Teile. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
8415.90.00 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8415.90.00
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8415Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated
- 8415.90Parts
- 8415.90.00Teile
From HS code to customs tariff code 8415.90.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Rohrleitung (Abbildung siehe Anlage) - spezifisch, nach technischer Zeichnung gefertigtes, längliches, mehrfach abgewinkeltes Rohr aus Aluminium, an den Enden jeweils mit speziellen Anschlüssen versehen, - je nach Ausführung in leicht unterschiedlicher Geometrie, - zum Einbau in eine Klimaanlage für Kraftfahrzeuge bestimmt, zur Verbindung des Heiz- und Kühlsystems, zur Durchleitung eines Kältemittels. "Teil, erkennbar ausschließlich für ein Klimagerät, bestehend aus einem motorbetriebenen Ventilator und Vorrichtungen zum Ändern der Temperatur und des Feuchtigkeitsgehalts der Luft bestimmt - Rohrleitung"
Gerätedeckel für eine Klimaanlage (Abbildung siehe Anlage) - in Form einer maßhaltig nach Werkzeichnung gefertigten Gehäusekomponente aus Stahlblech, mit schall- und luftaustritthemmender Mineralwolle-Verfüllung (Sandwichverfahren), rechteckigem Grundriss und Deckelverschluss (Pratze), - je nach Modell mit einer Deckelhöhe 20 mm oder 50 mm, - konzipiert als Bestandteil des Gehäuses einer mit Ventilator ausgestatteten Klimaanlage zur Temperierung und Luftfeuchteregulierung (Entfeuchtung) von Schwimmbadhallen. "Teil, erkennbar ausschließlich für Klimageräte zum Ändern der Temperatur und Luftfeuchtigkeit bestimmt - Gerätedeckel für eine Klimaanlage"
Panel boczny lewy stanowiący część obudowy jednostki zewnętrznej klimatyzatora typu split. Wykonany ze stali galwanizowanej ogniowo pokrytej lakierem. Towar dopasowany do kształtu klimatyzatora i innych jego części. Element o złożonej budowie zbliżonej do prostokątnej blachy z zagięciami na bocznych krawędziach, ma wykonane 12 czworobocznych nieregularnych otworów wentylacyjnych. Posiada zaczepy, otwory oraz przetłoczenia montażowe. Zaprojektowany jako element obudowy klimatyzatora wyposażonego w wentylator. Wg oświadczenia wnioskodawcy panel przeznaczony wyłącznie do naprawy klimatyzatora poprzez wymianę uszkodzonego elementu na nowy (część zamienna). Przybliżone wymiary 52 cm x 29 cm. Pakowanie w karton lub skrzynię, zabezpieczony folią i/lub wypełniaczami.
Panel boczny prawy stanowiący część obudowy jednostki zewnętrznej klimatyzatora typu split. Wykonany ze stali galwanizowanej ogniowo, pokrytej lakierem. Towar dopasowany do kształtu klimatyzatora i innych jego części. Element o złożonej budowie zbliżonej do prostokątnej blachy z zagięciem na bocznej prawej krawędzi która zachodzi na tył klimatyzatora. Panel ma wykonany prostokątny otwór w którym znajduje się blaszany zagięty otworowany wspornik wykonany pod późniejszy montaż i dostęp przyłącza elektrycznego/sterującego klimatyzatora, oraz zbliżone do prostokąta wycięcie wykonane pod wyprowadzenie zaworów i orurowania. Element posiada zaczepy, otwory, przetłoczenia montażowe oraz naklejki. Zaprojektowany jako element obudowy klimatyzatora wyposażonego w wentylator. Wg oświadczenia wnioskodawcy panel przeznaczony wyłącznie do naprawy klimatyzatora poprzez wymianę uszkodzonego elementu na nowy (część zamienna). Przybliżone wymiary 52 cm x 29 cm. Pakowanie w karton lub skrzynię, zabezpieczony folią i/lub wypełniaczami.
Panel dolny stanowiący część obudowy jednostki zewnętrznej klimatyzatora typu split. Wykonany ze stali galwanizowanej ogniowo, pokrytej lakierem. Towar dopasowany do kształtu klimatyzatora i innych jego części. Element ma kształt prostokątnego dekla (pokrywy) z profilowaną zewnętrzną krawędzią na obwodzie. Posiada zintegrowane na stałe dwie stopy/szyny montażowe, ułożone poprzecznie względem jego dłuższej osi służące do mocowania klimatyzatora na wspornikach(nie będących przedmiotem WIT) lub ustawienia na równym i stabilnym podłożu. Panel posiada zaczepy, otwory, przetłoczenia montażowe oraz 3 nitośruby służące do zamocowania sprężarki. Zaprojektowany jako element obudowy klimatyzatora wyposażonego w wentylator. Wg oświadczenia wnioskodawcy panel przeznaczony wyłącznie do naprawy klimatyzatora poprzez wymianę uszkodzonego elementu na nowy (część zamienna). Przybliżone wymiary 82 cm x 36 cm. Pakowanie w karton lub skrzynię, zabezpieczony folią i/lub wypełniaczami.
Panel (pokrywa)górna stanowiąca część obudowy jednostki zewnętrznej klimatyzatora typu split wykonana ze stali galwanizowanej ogniowo pokrytej lakierem. Towar dopasowany do kształtu klimatyzatora i innych jego części. Ma kształt prostokątnego dekla z profilowaną zewnętrzną krawędzią na obwodzie na której wykonane są 4 otwory oraz zaczepy montażowe. Panel od góry ma wykonane symetryczne wypukłe przetłoczenia natomiast od wewnątrz posiada przyklejone płaskie prostokątne uszczelki, zaprojektowany jako element obudowy klimatyzatora wyposażonego w wentylator. Wg oświadczenia wnioskodawcy panel przeznaczony wyłącznie do naprawy klimatyzatora poprzez wymianę uszkodzonego elementu na nowy (część zamienna). Przybliżone wymiary 82 cm x 29 cm. Pakowanie w karton lub skrzynię, zabezpieczony folią i/lub wypełniaczami.
Panel (pokrywa)przednia stanowiąca część obudowy jednostki zewnętrznej klimatyzatora typu split wykonana ze stali galwanizowanej ogniowo pokrytej lakierem. Towar dopasowany do kształtu klimatyzatora i innych jego części. Ma wykonany z lewej strony profilowany okrągły otwór przelotowy powietrza (pod wentylator), po prawej posiada prostokątne wypukłe przetłoczenie. Wyposażona jest w otwory montażowe i zaczepy. Na zewnętrznej części panelu na otworze zamontowana jest okrągła osłona perforowana o promienistym układzie żeber o średnicy około 47 cm wykonana z tworzywa sztucznego. Od wewnątrz zamocowany jest pasek z gąbki. Towar poprzez odpowiedni kształt otworu pozwala na skuteczny przepływ powietrza jednostki zewnętrznej klimatyzatora. Wg oświadczenia wnioskodawcy panel przeznaczony wyłącznie do naprawy klimatyzatora poprzez wymianę uszkodzonego elementu na nowy (część zamienna). Przybliżone wymiary 80 cm x 53 cm. Pakowanie w karton lub skrzynię, zabezpieczony folią i/lub wypełniaczami.
Dle deklarovaných údajů se jedná o topné těleso, které je součástí systému HVAC (topení, větrání a klimatizace) osobního automobilu. Výrobek slouží k ohřevu vzduchu (topení) v interiéru vozidla a dále slouží k odmlžování nebo rozmrazování čelního skla. Zdrojem tepla je teplý vzduch z motoru vozidla. Materiál: slitina hliníku.
Notes that govern this classification
Zu Unterposition 8415 90: Diese Unterposition erfasst sowohl Innen- als auch Außengeräte von Klimasplitgeräten der Unterposition 8415 10, wenn diese gesondert gestellt werden. Die Geräte sind dazu bestimmt, durch elektrische Leitungen und Kupferrohre, durch die ein Kühlmittel zwischen den Innen- und Außengeräten zirkuliert, verbunden zu werden.
Zu Unterposition 8415 90: 1. Innengerät für ein Kompressions-Klimasplitgerät, bestehend aus einer Verdampferschlange (Wärmeaustauscher), einem motorbetriebenen Ventilator, der die Luft über der Verdampferschlange ansaugt und sie im Raum verteilt, einem Luftfilter, einem Thermostat und einem Steuergerät, zusammen eingebaut in einem gemeinsamen Gehäuse. Das Gerät ist dazu bestimmt, mit dem Außengerät durch elektrische Leitungen und Kupferrohre, durch die das Kältemittel zirkuliert, verbunden zu werden. Anwendung der Allgemeinen Vorschriften 1 (Anmerkung 2 b) zu Abschnitt XVI) und 6. 2. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) DURCHFÜHRUNGSVERORDNUNG (EU) 2018/553 DER KOMMISSION vom 3.April 2018 (ABl. EU Nr. L 92/1) (RV L 952/13): Eine Ware, bestehend aus zwei Rohren, die durch Klammern zusammengehalten werden, mit einer Gesamtlänge von etwa 150 cm und einem Durchmesser der Rohre von jeweils etwa 0,8 cm. Es handelt sich um geschweißte Rohre aus einer Aluminiumlegierung. Die Ware ist zur Verwendung in Kraftfahrzeugen bestimmt und dient dazu, die Kühlflüssigkeit vom Motor zum Wärmetauscher unter dem Armaturenbrett des Fahrzeugs zu leiten. Unterposition: 7608 20 20 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN- Codes 7608, 7608 20 und 7608 20 20. …
Nationale Entscheidungen und Hinweise (NEH) Internationale Entscheidungen und Hinweise (IEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 220. Sitzung des Ausschusses für den Zollkodex vom 31. Mai bis 2. Juni 2021: Warenbeschreibung: Rohre, aus Aluminiumlegierung oder aus Kupfer, die für Klimaanlagen von Fahrzeugen bestimmt sind, um ein Kältemittel zu übertragen. Die fraglichen Rohre sind am Ende speziell geformt, um sie an andere Leitungen der Klimaanlage anzuschließen. Sie existieren in unterschiedlichen Längen. Einreihung: Die Waren sind in Anwendung der AV 1 und 6, Anmerkung 1 e) zu Kapitel 76 und dem Wortlaut der KN-Codes 7608, 7608 20 und 7608 20 89 in die Unterposition 7608 20 89 einzureihen. …
Subdivisions of this code
- 8415.90.00.10Of air conditioning machines of subheading Nos 8415 81, 8415 82 or 8415 83, for use in civil aircraft
- 8415.90.00.15Electrically welded manifolds for the condenser in automotive air conditioning systems: -consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding, -containing internal baffles responsible for the proper flow of coolant, -with a length of 190 mm or more, but not more than 460 mm, -with a diameter of 9 mm or more, but not more than 42 mm, -with a weight of 0,01 kg or more, but not more than 0,45 kg, -whether or not having aluminium connection blocks, used in the production of air conditioning systems in vehicles of Chapter 87
- 8415.90.00.45Aluminium connecting block for automotive air conditioning systems: -with a T6 hardening, -equipped with round stubs with a circumferential outer groove, -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm, -with a distance between holes of 15 mm or more but not more than 22 mm, -with sockets designed for brazing or clamping, -with mounting holes for M6 or M8 mounting screw, threaded or not, -with a width of 5 mm or more but not more than 16 mm, -for connecting a compressor, a condenser, an evaporator, a chiller and other lines
- 8415.90.00.60Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with: -extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm, -a weight of 0,02 kg or more but not more than 0,25 kg
- 8415.90.00.91Pre-charged with hydrofluorocarbons (HFCs)
- 8415.90.00.99Other
Frequently asked questions
What does customs tariff code 8415.90.00 cover?
Code 8415.90.00 covers Teile. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8415.90.00?
TARIC holds no third-country rate of its own for 8415.90.00. The rate follows from the declarable commodity code beneath it.
What is the HS code for 8415.90.00?
The first six digits form the HS code: 841590. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8415.90.00 have?
8415.90.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8415.90.00 sit in the tariff?
8415.90.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8415 Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated > 841590 Parts. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8415.90.00?
Yes. The EBTI database holds decisions on 8415.90.00, for example DEBTI50477/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8415.90.00 change?
8415.90.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.