Customs tariff code 8454.30.90: Other
Reference data as at 1 July 2026
Customs tariff code 8454.30.90 covers Other. The third-country duty rate is 1.7 %, plus import VAT.
8454.30.90 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8454.30.90
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
From HS code to customs tariff code 8454.30.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1B002Equipment designed to produce metal alloy powder or particulate materials, and having all of the following:
- 1B102Metal powder "production equipment", other than that specified in 1B002, and components as follows:
- 9B001aManufacturing equipment, tooling or fixtures, as follows:
- 1B002Equipment designed to produce metal alloy powder or particulate materials, and having all of the following:
- 1B102Metal powder "production equipment", other than that specified in 1B002, and components as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Automatyczna maszyna odlewnicza o kompaktowej konstrukcji, przeznaczona do odlewania niedużych elementów z ołowiu. Maszyna topi wsad z ołowiu w tyglu, z którego po otwarciu zaworu spustowego ołów w stanie ciekłym jest kierowany grawitacyjnie (samoczynnie) przez dysze wlewając się do formy (kokili - niebędących przedmiotem niniejszej WIT). Maszyna umożliwia pracę w cyklu automatycznym. Znajdujący się w korpusie mechanizm otwarcia i obrotu kokili, umożliwia grawitacyjne oddzielenie gotowego wyrobu odlewniczego po zakończeniu procesu odlewania. Maszyna odlewnicza zasadniczo składa się z: korpusu głównego zawierającego mechanizm, pieca z tyglem, panelu sterowniczego i szafy zasilającej. Maszyna wyposażona jest w elementy wykonawcze takie jak: elektryczny silnik krokowy, elektromagnes oraz grzałki elektryczne, a także układ sterowania obejmujący przyciski, wyłączniki, przełączniki, panel operatorski, regulator temperatury, skrzynkę sterowniczą(zasilającą), czujnik temperatury, czujnik krańcowy. Urządzenie dostarczane w skrzyni w stanie rozmontowanym na mniejsze podzespoły. Elementy przeznaczone są do wspólnej pracy jako jedna maszyna. Napięcie zasilania: 200–240V AC. Moc maksymalna: ok. 2,5 kW. Masa całkowita: ok. 36 kg. Masa wsadu: ok. 23kg
Andere Gießmaschine in Form einer Stranggießanlage zum semikontinuierlichen bis kontinuierlichen Gießen von flüssigem Stahl in Endlosstränge, bestehend aus Gießkran Gießpfanne, Verteilvorrichtung, oszillierend beweglichen Kokillen, Luft- und Wassersprühanlage zur Kühlung, Transportrollen zum Fortbewegen des Stahlstranges, Walzen, Brenner zum Instückeschneiden des Stranges und Kühlbett. (Angaben laut Unternehmen)
Stranggießanlage zum semikontinuierlichen bis kontinuierlichen Gießen von flüssigem Stahl in Endlosstränge, bestehend aus Gießkran, Gießpfanne, Verteilvorrichtung, oszillierend beweglichen Kokillen, Luft- und Wasserbesprühanlage zur Kühlung, Transportrollen zum Fortbewegen des Stahlstranges, Walzen, Brenner zum Instückeschneiden des Stranges und Kühlbett. (Angaben laut Antragsteller)
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) A) Konverter Konverter sind metallurgische Apparate mit thermischer Reaktion, die jedoch nicht mit Feuerung ausgerüstet sind. Einzig mit Hilfe eines starken Sauerstoffstroms bewirken sie die Verbrennung oder Oxidation von gewissen Elementen des eingebrachten Materials, das zuvor schmelzflüssig gemacht oder auf hohe Temperatur gebracht wurde. Konverter dienen hauptsächlich zum Reinigen des Roheisens (Ausscheidung von Mangan, Silizium, Phosphor usw.) und zu dessen Umwandlung in Stahl (Verbrennung des Kohlenstoffs) bzw. auch zum Rösten von Kupfermatte, Nickelmatte oder Bleiglanz. Die am häufigsten vorkommenden Konverter sind birnenförmige oder zylindrische Behälter aus schweren Stahlplatten, die innen mit einem Futter aus feuerfestem Material ausgekleidet sind. Der Sauerstoff wird über eine sog. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8454.30.90 cover?
Code 8454.30.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8454.30.90?
The third-country duty rate for 8454.30.90 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8454.30.90?
The first six digits form the HS code: 845430. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8454.30.90 have?
8454.30.90 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8454.30.90 sit in the tariff?
8454.30.90 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8454 Converters, ladles, ingot moulds and casting machines, of a kind used in metallurgy or in metal foundries > 845430 Casting machines. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8454.30.90?
Yes. The EBTI database holds decisions on 8454.30.90, for example PLBTIWIT-2026-000705. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8454.30.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8454.30.90 to 1B002, 1B102, 9B001a, 1B002, 1B102. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8454.30.90 change?
8454.30.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.