Customs tariff code 8457.30.10.00.0: Numerically controlled, numerisch gesteuert
Reference data as at 1 July 2026
Customs tariff code 8457.30.10.00.0 covers Numerically controlled, numerisch gesteuert. The third-country duty rate is 2.7 %, plus import VAT.
8457.30.10.00.0 is national commodity code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 8457.30.10.00.0
- Third-country duty
- 2.7 %
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8457Machining centres, unit construction machines (single station) and multi-station transfer machines, for working metal
- 8457.30Multi-station transfer machines
- 8457.30.10Numerically controlled
- 8457.30.10.00.0Numerically controlled, numerisch gesteuert
From HS code to customs tariff code 8457.30.10.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 2B001bMachine tools and any combination thereof, for removing (or cutting) metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for "numerical control", as follows:
- 2B201aMachine tools and any combination thereof, other than those specified in 2B001, as follows, for removing or cutting metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for simultaneous "contouring control" in two or more axes:
- 2B201bMachine tools and any combination thereof, other than those specified in 2B001, as follows, for removing or cutting metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for simultaneous "contouring control" in two or more axes:
- 2B201cMachine tools and any combination thereof, other than those specified in 2B001, as follows, for removing or cutting metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for simultaneous "contouring control" in two or more axes:
- 2B001Machine tools and any combination thereof, for removing (or cutting) metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for "numerical control", as follows:
- 2B201Machine tools and any combination thereof, other than those specified in 2B001, as follows, for removing or cutting metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for simultaneous "contouring control" in two or more axes:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Zu Position 8457 gehören nur metallbearbeitende Werkzeugmaschinen, ausgenommen Drehmaschinen (einschließlich Drehzentren), die mehrere verschiedenartige Bearbeitungsvorgänge ausführen können, und zwar entweder a) durch automatischen Werkzeugwechsel aus einem Werkzeugmagazin oder dergleichen entsprechend einem Bearbeitungsprogramm (Bearbeitungszentren) oder (RV E8404A00) b) durch automatischen Einsatz verschiedener Bearbeitungseinheiten, die gleichzeitig oder nacheinander ein feststehendes Werkstück bearbeiten (Mehrwegemaschinen) (RV E8404B00) oder c) durch automatisches Zuführen des Werkstücks zu verschiedenen Bearbeitungseinheiten (Transfermaschinen) (RV E8404C00). 5. Im Sinne der Position 8462 ist eine „Längsteilanlage“ für Flacherzeugnisse eine Verarbeitungsanlage, die aus einem Abwickelgerät, einer Richtmaschine, einer Längsteilmaschine und einem Aufwickelgerät besteht. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Frequently asked questions
What does customs tariff code 8457.30.10.00.0 cover?
Code 8457.30.10.00.0 covers Numerically controlled, numerisch gesteuert. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8457.30.10.00.0?
The third-country duty rate for 8457.30.10.00.0 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8457.30.10.00.0?
The first six digits form the HS code: 845730. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8457.30.10.00.0 have?
8457.30.10.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 8457.30.10.00.0 sit in the tariff?
8457.30.10.00.0 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8457 Machining centres, unit construction machines (single station) and multi-station transfer machines, for working metal > 845730 Multi-station transfer machines > 84573010 Numerically controlled. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8457.30.10.00.0?
The EBTI database currently holds no valid decisions on 8457.30.10.00.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8457.30.10.00.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8457.30.10.00.0 to 2B001b, 2B201a, 2B201b, 2B201c, 2B001, 2B201. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8457.30.10.00.0 change?
8457.30.10.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.