Customs tariff code 8460.24.00.00.0: Other, andere Schleifmaschinen, andere, numerisch gesteuert
Reference data as at 1 July 2026
Customs tariff code 8460.24.00.00.0 covers Other, andere Schleifmaschinen, andere, numerisch gesteuert. The third-country duty rate is 1.7 %, plus import VAT.
8460.24.00.00.0 is national commodity code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 8460.24.00.00.0
- Third-country duty
- 1.7 %
- Declarable
- Yes
- Binding rulings
- 1
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8460Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461
- 8460.24Other, numerically controlled
- 8460.24.00.00.0Other, andere Schleifmaschinen, andere, numerisch gesteuert
From HS code to customs tariff code 8460.24.00.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 2B001cMachine tools and any combination thereof, for removing (or cutting) metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for "numerical control", as follows:
- 2B003"Numerically controlled" machine tools, specially designed for the shaving, finishing, grinding or honing of hardened (Rc=40 or more) spur, helical and double-helical gears having all of the following:
- 2B201bMachine tools and any combination thereof, other than those specified in 2B001, as follows, for removing or cutting metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for simultaneous "contouring control" in two or more axes:
- 2B001cMachine tools and any combination thereof, for removing (or cutting) metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for "numerical control", as follows:
- 2B003"Numerically controlled" machine tools, specially designed for the shaving, finishing, grinding or honing of hardened (Rc=40 or more) spur, helical and double-helical gears having all of the following:
- 2B201bMachine tools and any combination thereof, other than those specified in 2B001, as follows, for removing or cutting metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for simultaneous "contouring control" in two or more axes:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Vollautomatische Doppelspitzen-Schleifmaschine - in Form eines gemeinsam, modular aufgebauten Maschinenkörpers aus zwei Transportsystemen, Vereinzelungssystem, zwei Schleifeinheiten mit Schleifscheiben, Dreh- und Biegeeinheit, Strahlstation, Polierstation und einer Ausgabestation, - nummerisch gesteuert, - zum Herstellen von Kanülen in Form von Einzel- oder Doppelspitzen aus unedlem Metall mittels Schleifen (kennzeichnende Haupttätigkeit), optionalen Drehen oder Biegen, Sandstrahlen und Polieren. "Werkzeugmaschine zum Schleifen von Metallen mit Hilfe von Schleifscheiben, keine Flach- oder Planschleifmaschinen, keine Ware der Codenummern 8460 2200 00 0 bis 8460 2300 00 0, nummerisch gesteuert (Kombination aus Transportsystem, Vereinzelungssystem, Schleifeinheiten -kennzeichnende Haupttätigkeit-, Dreh- und Biegeeinheit, Strahlstation, Polierstation und Ausgabestation - Schleifmaschine"
Notes that govern this classification
Zu Unterpositionen 8460 22 00 bis 8460 29 90: Die Erläuterungen zu den Unterpositionen 8460 12 00 und 8460 19 00 gelten sinngemäß. (entfallen) bis Zu Unterposition 8460 24 00 Hierher gehören z. B. Universalrundschleifmaschinen. Dies sind kombinierte Außen- und Innenrundschleifmaschinen und damit sowohl für die gleichzeitige Außen- als auch die Innenbearbeitung eines Werkstücks geeignet.
Zu Unterpositionen 8460 12, 8460 22, 8460 23, 8460 24 und 8460 31: Siehe Erläuterungen zu den Unterpositionen 8458 11 und 8458 91 91 bezüglich des Begriffs „numerisch gesteuert“.
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Frequently asked questions
What does customs tariff code 8460.24.00.00.0 cover?
Code 8460.24.00.00.0 covers Other, andere Schleifmaschinen, andere, numerisch gesteuert. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8460.24.00.00.0?
The third-country duty rate for 8460.24.00.00.0 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8460.24.00.00.0?
The first six digits form the HS code: 846024. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8460.24.00.00.0 have?
8460.24.00.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 8460.24.00.00.0 sit in the tariff?
8460.24.00.00.0 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8460 Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461 > 846024 Other, numerically controlled. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8460.24.00.00.0?
Yes. The EBTI database holds decisions on 8460.24.00.00.0, for example DEBTI45809/24-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8460.24.00.00.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8460.24.00.00.0 to 2B001c, 2B003, 2B201b, 2B001c, 2B003, 2B201b. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8460.24.00.00.0 change?
8460.24.00.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.