Customs tariff code 8465.99.00.00.0: Other, andere, andere
Reference data as at 1 July 2026
Customs tariff code 8465.99.00.00.0 covers Other, andere, andere. The third-country duty rate is 2.7 %, plus import VAT.
8465.99.00.00.0 is national commodity code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 8465.99.00.00.0
- Third-country duty
- 2.7 %
- Declarable
- Yes
- Binding rulings
- 4
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8465Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
- 8465.99Other
- 8465.99.00.00.0Other, andere, andere
From HS code to customs tariff code 8465.99.00.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B006Plant for the reprocessing of irradiated "nuclear reactor" fuel elements, and specially designed or prepared equipment and components therefor.
- 2B001aMachine tools and any combination thereof, for removing (or cutting) metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for "numerical control", as follows:
- 2B201cMachine tools and any combination thereof, other than those specified in 2B001, as follows, for removing or cutting metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for simultaneous "contouring control" in two or more axes:
- 2B001aMachine tools and any combination thereof, for removing (or cutting) metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for "numerical control", as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Bodenbelagschneider - aus einem Gestell aus Metall zum Aufstellen auf den Boden, einem daran montierten, von Hand zu betätigenden Messer mit Handgriff, Positionier-Lasereinheit, Batterifach und Materialstütze, noch nicht zusammengesetzt, Abmessungen ca. 1075 x 524 x 427 mm, zusammen mit Montagematerial (Abbildung siehe Anlage), - zum Schneiden von Laminat, Parkett, anderen Holzbodenbelägen und Vinyl. Den Charakter der Ware bestimmt der Bodenbelagschneider. "Werkzeugmaschine zum Bearbeiten von Holz und anderen harten Stoffen, nicht von der in den Unterpositionen 8465 91 bis 8465 96 erfassten Art, mit Montagematerial (zusammengesetzte Ware aus Bodenbelagschneider - charakterbestimmend - und Lasereinheit, noch nicht zusammengesetzt mit Messer und Handgriff)"
Bodenbelagschneider - aus einem Gestell aus Metall zum Aufstellen auf den Boden, einem daran montierten, von Hand zu betätigenden Messer mit Handgriff sowie einer Materialstütze, noch nicht zusammengesetzt, Abmessungen ca. 834 x 230 x 420 mm, mit Montagematerial (Abbildung siehe Anlage), - zum Schneiden von z. B. Laminat, Parkett oder Vinyl. "Werkzeugmaschine zum Bearbeiten von Holz und anderen harten Stoffen, nicht von der in den Unterpositionen 8465 91 bis 8465 96 erfassten Art, noch nicht zusammengesetzt, mit Montage- material - Bodenbelagschneider"
Bodenbelagschneider - aus einem Gestell aus Metall zum Aufstellen auf den Boden, einem daran montierten, von Hand zu betätigenden Messer mit Handgriff sowie einer Materialstütze, noch nicht zusammengesetzt, Abmessungen ca. 764 x 191 x 164 mm, mit Montagematerial (Abbildung siehe Anlage), - zum Schneiden vom Laminat, Holzfaserplatten und Faserzement. "Werkzeugmaschine zum Bearbeiten von Holz und ähnlichen harten Stoffen, nicht von der in den Unterpositionen 8465 91 bis 8465 96 erfassten Art, noch nicht zusammengesetzt, mit Montage- material - Bodenbelagschneider"
Laminatschneider - aus einem Gestell aus Metall zum Aufstellen auf den Boden, einem daran montierten, von Hand zu betätigendem Messer mit Handgriff sowie einer Materialstütze, Abmessungen ca. 778 x 236 x 164 mm, noch nicht zusammengesetzt (Abbildung siehe Anlage), - zum Schneiden vom Laminat und Holzfaserplatten, - zusammen mit Beipack (Montagematerial) in einer gemeinsamen Verkaufsumschließung. Der Laminatschneider bestimmt den Charakter des Ganzen. "Werkzeugmaschine zum Bearbeiten von Holz, nicht von der in den Unterpositionen (HS) 8465 91 bis 8465 96 erfassten Art, noch nicht zusammengesetzt (Warenzusammenstellung aus Laminat- und Holzfaser- plattenschneider mit nicht charakterbestimmendem Beipack) - sog. Laminatschneider"
Notes that govern this classification
Zu Unterposition 8465 99: 1. Mühlen, die nach ihrer Bauart eigens zum Mahlen von Abfällen aus harten Kunststoffen bestimmt sind. Diese Mühlen werden von einem Elektromotor angetrieben und sind mit drei beweglichen und zwei feststehenden Schneidmessern ausgestattet.
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Frequently asked questions
What does customs tariff code 8465.99.00.00.0 cover?
Code 8465.99.00.00.0 covers Other, andere, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8465.99.00.00.0?
The third-country duty rate for 8465.99.00.00.0 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8465.99.00.00.0?
The first six digits form the HS code: 846599. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8465.99.00.00.0 have?
8465.99.00.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 8465.99.00.00.0 sit in the tariff?
8465.99.00.00.0 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8465 Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials > 846599 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8465.99.00.00.0?
Yes. The EBTI database holds decisions on 8465.99.00.00.0, for example DE16646/12-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8465.99.00.00.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8465.99.00.00.0 to 0B006, 2B001a, 2B201c, 2B001a. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8465.99.00.00.0 change?
8465.99.00.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.