Customs tariff code 8466.94.00.00.0: For machines of heading 8462 or 8463, andere, für Maschinen der Position 8462 oder 8463
Reference data as at 1 July 2026
Customs tariff code 8466.94.00.00.0 covers For machines of heading 8462 or 8463, andere, für Maschinen der Position 8462 oder 8463. The third-country duty rate is 1.2 %, plus import VAT.
8466.94.00.00.0 is national commodity code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 8466.94.00.00.0
- Third-country duty
- 1.2 %
- Declarable
- Yes
- Binding rulings
- 7
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8466Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand
- 8466.94For machines of heading 8462 or 8463
- 8466.94.00.00.0For machines of heading 8462 or 8463, andere, für Maschinen der Position 8462 oder 8463
From HS code to customs tariff code 8466.94.00.00.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1B003Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys, specially designed for the manufacture of any of the following:
- 2B004Hot "isostatic presses" having all of the following, and specially designed components and accessories therefor:
- 2B008'Compound rotary tables' and "tilting spindles", specially designed for machine tools, as follows:
- 2B109Flow-forming machines, other than those specified in 2B009, usable in the "production" of propulsion components and equipment (e.g. motor cases and interstages) for "missiles", and specially designed components as follows:
- 2B204"Isostatic presses", other than those specified in 2B004 or 2B104, and related equipment, as follows:
- 2B209Flow forming machines, spin forming machines capable of flow forming functions, other than those specified in 2B009 or 2B109, and mandrels, as follows:
- 2B008'Compound rotary tables' and "tilting spindles", specially designed for machine tools, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Stanzwerkzeug - spezifisch, nach technischer Zeichnung gefertigtes Erzeugnis im Wesentlichen aus Schnittplatte, Schnitteinsatz, Säulengestell, Kopfplatte, Druckplatte, Halteplatte, Schnittstempel, Prägeschieber, Prägeeinsatz, Matrize, Federn und Auswerfer, - zum Einbau in eine Exzenterpresse zum Bearbeiten von Metallen bestimmt, zur Verwendung als Stanzwerkzeug. "Teil, erkennbar ausschließlich für eine Maschine der Position 8462 bestimmt - Stanzwerkzeug"
Verstellbarer Anschlagwinkel, Art.Nr. 2001EVO-FDB - aus einer Metall-Schiene mit Fixierelementen an den beiden Schienenenden, über Flügelschrauben flexibel befestigt an zwei Montagestangen (Abbildung siehe Anlage), - zum Anbau an eine Metallschere zur Erweiterung der Breiteneinstellung (Rechtsanschlag oder Hinteranschlag). "Zubehör, erkennbar ausschließlich für Maschinen der Position 8462 bestimmt - sog. verstellbarer Anschlagwinkel für Metallschere"
Presswerkzeuge, - annähernd zylinderförmig, spezifisch geformt, bestehend aus acht Pressbacken aus Stahl mit einer zentrischen Öffnung und unterschiedlichen Kennzeichnungsrillen, - zum Verpressen von Schlaucharmaturen aus Stahl mit Kunststoffschläuchen, zum Einsatz in Hydraulischen Pressen bestimmt. "Teil, erkennbar ausschließlich oder hauptsächlich für Maschinen der Position 8462 bestimmt - sog. Presswerkzeuge"
Sog. Montagekopf MHSUT, - nahezu ringförmiges Erzeugnis mit spezifischen Einkerbungen, je nach Ausführung in Größen von 1/2 bis 2 Zoll oder 12 bis 50 mm, - zum Einbau in ein hydraulisches Montagewerkzeug zum Verpressen von Rohr- verschraubungsklemmringen aus Metall auf Rohre. "Teil, erkennbar ausschließlich für Waren der Position 8462 bestimmt - sog. Montagekopf"
Sog. Montagekopf AHSUT, - nahezu ringförmiges Erzeugnis mit spezifischen Einkerbungen, je nach Ausführung in Größen von 1/4 bis 1/2 Zoll oder 6 bis 12 mm, - zum Einbau in ein hydraulisches Montagewerkzeug zum Verpressen von Rohr- verschraubungsklemmringen aus Metall auf Rohre. "Teil, erkennbar ausschließlich für Waren der Position 8462 bestimmt - sog. Montagekopf"
Bandvorschub - aus zwei übereinander angeordneten, sich gegeneinander drehenden Vorschubwalzen mit Getriebe und AC-Servo Antriebsmotor, Zwischenlüfteinheit mit AC-Servo Antriebsmotor und Bandführung mit Bandendesensor (sog. mechanische Komponente), - zum Schieben bzw. Ziehen von Metallbändern mit rechteckigem Querschnitt, - als Zubehör für Stanz- und Umformmaschinen in Form von Exzenterpressen, - geliefert mit einer Paketiersteuerung (nicht Gegenstand dieser vZTA). "Zubehör, erkennbar ausschließlich für Maschinen der Position 8462 bestimmt - Bandvorschub für Exzenterpresse"
Bandvorschub - aus zwei übereinander angeordneten, sich gegeneinander drehenden Vorschubwalzen mit Getriebe und AC-Servo Antriebsmotor, Zwischenlüfteinheit mit AC-Servo Antriebsmotor und Bandführung mit Bandendesensor (sog. mechanische Komponente) sowie einem über Kabel angeschlossenem Steuerschrank mit Control Unit, Leistungs-, Servomodulen zur Ansteuerung der Antriebsmotoren und Bedientreminal zur Programmierung der Vorschub- daten (sog. elektronische Komponente), - zum Schieben bzw. Ziehen von Metallbändern mit rechteckigem Querschnitt, - als Zubehör für Stanz- und Umformmaschinen in Form von Exzenterpressen, - zusammen mit einer Fernbedienung für den Steuerschrank in einer gemeinsamen Verkaufsumschließung. Der Bandvorschub bestimmt den Charakter des Ganzen. "Zubehör, erkennbar ausschließlich für Maschinen der Position 8462 bestimmt - Bandvorschub in funktioneller Einheit mit Steuerschrank, in Warenzusammenstellung mit nicht charakterbestimmender Fernbedienung"
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören vorbehaltlich der allgemeinen Bestimmungen über die Einreihung von Teilen (siehe Erläuterungen zu Abschnitt XVI, Allgemeines) und mit Ausnahme der Werkzeuge des Kapitels 82: A) Teile der Maschinen der Positionen 8456 bis 8465. B) Zubehör für diese Maschinen, d. h. auswechselbare Ausrüstungsgegenstände, welche die genannten Maschinen der auszuführenden Arbeit anpassen, Vorrichtungen, die den Maschinen zusätzlich Bearbeitungsmöglichkeiten oder eine höhere Präzision geben und Vorrichtungen, die es ermöglichen, eine im Zusammenhang mit der Hauptfunktion der Maschinen stehende Sonderarbeit auszuführen. C) Werkzeughalter für von Hand zu führende Werkzeuge oder Werkzeugmaschinen, aller Art. Zu den hier erfassten Teilen und Zubehör gehören u. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Frequently asked questions
What does customs tariff code 8466.94.00.00.0 cover?
Code 8466.94.00.00.0 covers For machines of heading 8462 or 8463, andere, für Maschinen der Position 8462 oder 8463. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8466.94.00.00.0?
The third-country duty rate for 8466.94.00.00.0 is 1.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8466.94.00.00.0?
The first six digits form the HS code: 846694. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8466.94.00.00.0 have?
8466.94.00.00.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 8466.94.00.00.0 sit in the tariff?
8466.94.00.00.0 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8466 Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand > 846694 For machines of heading 8462 or 8463. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8466.94.00.00.0?
Yes. The EBTI database holds decisions on 8466.94.00.00.0, for example DEBTI44679/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8466.94.00.00.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8466.94.00.00.0 to 1B003, 2B004, 2B008, 2B109, 2B204, 2B209, 2B008. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8466.94.00.00.0 change?
8466.94.00.00.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.