Customs tariff code 8467.99.00: Teile, andere
Reference data as at 1 July 2026
Customs tariff code 8467.99.00 covers Teile, andere. The third-country duty rate is 1.7 %, plus import VAT.
8467.99.00 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8467.99.00
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 8467.99.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Platine für hydraulische Werkzeuge (Abbildung siehe Anlage) - bestehend aus einer zentralen Trägerstruktur für elektronische Bauteile (Leiterplatte) mit Eingängen für Drucksensor, Triggerplatine, Stromversorgung und Programmierschnitt- stelle sowie Ausgängen für einen Elektromagnet und Stromversorgung für den Motor, ein- gegossen in einem spezifischen, der Einbausituation angepassten Aufnahme- und Fixierungs- gehäuse, - zum Einbau in von Hand zu führende akkubetriebene hydraulische Werkzeuge (z.B. Press- werkzeug, Schneidwerkzeug oder Universalwerkzeug), - dient zur Steuerung von Elektromotor und Elektromagnet, zur Ausgabe von akustischen und optischen Signalen sowie zur Auswertung elektrischer Signale eines Sensors. "Teil, erkennbar ausschließlich oder hauptsächlich für von Hand zu führende Werkzeuge mit eingebautem Elektromotor bestimmt, nicht von Kettensägen oder von pneumatischen Werk- zeugen - Platine für hydraulische Werkzeuge"
Dle deklarovaných údajů se jedná o ocelový výrobek kruhového tvaru, který slouží k vymezení středu kotouče v úhlové brusce v rámci jejího krytu.
Schaft - spezifisch gefertigtes Erzeugnis (Durchmesser: 25,4 mm) bestehend aus Führungsrohr aus Aluminium, Lagerrohr aus Kunststoff (Länge: 1455 mm) und zwei Stopfen aus Kunststoff, - zum Einbau in eine Akku-Motorsense, - als Verbindungsstück von Motoreinheit und Getriebe / Mähwerkzeug. "Teil, erkennbar ausschließlich bestimmt für von eingebautem Motor betriebene und Hand zu führenden Werkzeugen, keine Ware der Unterpositionen (KN) 8467 9100 bis 8467 9200 - Schaft"
Führungszylinder Rohrteil (Abbildung siehe Anlage) - in Form eines spezifisch geformten Strangpressteils aus Aluminium (Bauteillänge 356 mm) mit annähernd rautenförmigem Querschnitt, durchgängiger, zylindrischer Schlagwerk- Lauffläche und an der Außenseite verlaufenden Längsrippen, - nach weiterer mechanischer Bearbeitung, unfertig, zur Führung des Schlagwerks des Aufbruchhammers bestimmt, - zur Verwendung in einem von Hand zu führenden, mittels eingebauten Benzinmotor oder Elektromotor angetriebenen Aufbruchhammer (Benzinhammer oder Elektrohammer). "Teil, erkennbar ausschließlich für ein von Hand zu führendes und von eingebautem Motor angetriebenes Werkzeug, keine Ware der Unterpositionen (KN) 8467 9100 bis 8467 9200, unfertig - Führungszylinder Rohrteil"
Dle poskytnutých informací a přiložené fotodokumentace se jedná o kryt ruční elektrické brusky. Je vyroben z ocelového plechu, který je lakován.
Dle poskytnutých informací a přiložené fotodokumentace se jedná o kryt s objímkou ruční elektrické drážkovací brusky. Kryt je vyroben z ocelového plechu, který je lakován.
Dle poskytnutých informací a přiložené fotodokumentace se jedná kluznou (krycí) část ruční elektrické drážkovací brusky. Zboží je vyrobeno z ocelového plechu, který je lakován.
Dle poskytnutých informací a přiložené fotodokumentace se jedná o kluznou lištu ruční elektrické drážkovací brusky. Lišta je vyrobena z ocelového plechu, který je lakován.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Werkzeuge, in die ein Elektromotor, ein Druckluftmotor (oder ein durch Druckluft angetriebener Kolben), ein Kolbenverbrennungsmotor oder ein anderer Motor (z. B. eine kleine Wasserturbine) eingebaut ist. Der Druckluftmotor wird im Allgemeinen von einer externen Druckluftquelle angetrieben. Bei einem Kolbenverbrennungsmotor ist die Zündbatterie manchmal vom Werkzeug getrennt. Bei pneumatisch betriebenen Werkzeugen wird die Wirkung der Druckluft manchmal durch eine hydraulische Vorrichtung unterstützt (hydro- oder ölpneumatische Werkzeuge). Derartige Werkzeuge gehören nur dann zu dieser Position, wenn sie von Hand geführt werden können. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
- 8467.99.00.10Pole hedge trimmer cutting elements: -in the form of hedge trimmer attachment, -with a knife length of 60 cm and teeth opening of 30 mm, -with angle adjustment of the blade, -with integrated single stage gearbox, -with a magnesium cast body, for use in the manufacture of garden machinery and power tools
- 8467.99.00.90Other
Frequently asked questions
What does customs tariff code 8467.99.00 cover?
Code 8467.99.00 covers Teile, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8467.99.00?
The third-country duty rate for 8467.99.00 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8467.99.00?
The first six digits form the HS code: 846799. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8467.99.00 have?
8467.99.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8467.99.00 sit in the tariff?
8467.99.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8467 Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor > 846799 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8467.99.00?
Yes. The EBTI database holds decisions on 8467.99.00, for example DEBTI15461/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8467.99.00 change?
8467.99.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.